Hello,
So, is there out any RSS reader for WM which really shows full articles.
I've tried a lot of them , SPB Insight,BeyondPod,News Break , etc. and everyone had that ugly link on a bottom "click here to read whole article".
So, I need some RSS reader which will download FULL article , not only a first section of article , because then i need to click on a link, then internet browser opens , and loading whole site where is rss feed...slowly....
Thank You!
I've only used a few, but I'm quite sure any reader you use is going to limit the article somewhere along the line. It prevents your phone from being loaded up on articles you don't want.
Well they can prevent this by loading all articles,but only part of articles, and when you open article which is interesting to you , loads full article.
kish89 said:
Well they can prevent this by loading all articles,but only part of articles, and when you open article which is interesting to you , loads full article.
Click to expand...
Click to collapse
That's when your really interested, and you hit the "Read Full Article" link.
Yes , I can hit the "read full article" , but problem is that mobile opera needs a lot of time to open and load page( whole page where is the article) , its not extracting only the article , and thats wasting of time and money(gprs,3g)
I just want that RSS reader extracts full article , so I dont need to open my internet browser...
I could be wrong but I think this is determined by the feed itself and not the reader. for example wmexperts, brg and engadget post the whole article cnn does not.
kbcherry said:
I could be wrong but I think this is determined by the feed itself and not the reader. for example wmexperts, brg and engadget post the whole article cnn does not.
Click to expand...
Click to collapse
definitely : this is not reader related, but due to the feed :
most of sites truncate the article so that you have a glimpse of it and need to browse their site to have the full article (and more... purely marketing wise)
Some others push the full article in their RSS Feed.
By the way, I tested different readers, and to me BeyondPod (2.8) is great : includes icons, manages rss, podcasts, and automatically downloads podcasts when refreshing, not like the buggy Newsbreak which is not free (!)
Hello everyone,
while I was on my tortureous Odyssey of finding a working htc sense eReader.cab version I had an idea ...
Isn't it feasable to use the mobile page of the "Project Gutenberg" like a free app-store? It would be overwhelming! About 20.000 free eBooks to choose from - and to make the decision more difficult - one can choose the format in which the file will arrive on the device --> pdf, epub, html, w/o pics....
Just an idea.... but I must admit that I'm a loser when it comes to programming. I could do beta-testing
Good Idea but one hell of a project..
Any one willing to take it on?
Just an idea...
That's how the mobile site looks alike:
http://www.gutenberg.org/catalog.mobile/search/
There are also apple-apps available, which are similar to the setting of the mobile site... don't know, perhaps this could be a helping information?
Or you could just download Freda (http://forum.xda-developers.com/showthread.php?p=7141176), go to the 'Add to library' screen and point it at the Lucidor OPDS catalog of the Gutenberg books database (http://lucidor.heliohost.org/opds/pg.php). That should work ...
EDIT: It does work, kind-of. The 'next/previous' page reference links aren't being picked up right by Freda, so for multi-page entries (e.g. "all authors beginning A") you only see the first page. I will fix this in the next Freda build. In the meantime, you can work round by manually editing the fi number (e.g. in the URL, replace "&fi=1" with "&fi=100", and the display will start with the hundredth entry, not the first).
This would be quite nice if Freda would support the Gutenberg Site.
Not to mention the additional popularity boost "Freda" would gain with this support!
Very nice idea. Thanks in advance!
Biggest free eBook Store on the web for htc HD2Arrow
Google Android and Symbian S60 have a similar task switcher where your press and hold the
RSS reader offline fulltext articles with images, optimized for traffic economy
This is a separate branch of the Flym RSS reader application
Main functions:
- RSS feeds of articles
- search for by keyword when adding feed
- download offline full-text versions of articles with images
- import / export of the channel list from OPML
- filter articles by keywords or regular expressions
- full screen reading mode
From the modified:
- loading articles from site without rss (all site links will be loaded as articles)
- keyword to mark articles as favourite when loading new ones (with notification)
- collapsing (folding) the groups of feeds
- swype article left|right to mark read|favourite
- the ability to hide read articles per channel
- bold type of reading articles
- view shared link from other app (e.x. browser) in app mobilized
- limit the number of downloadable images of the article
- the ability to download individual images of the article
- a detailed description of the process of downloading articles to understand what the application is doing at the moment
- the counter of the consumed traffic
- setting up automatic marking of articles as read while scrolling the list
- setting the display of the text of articles in the article list (these two items are useful for reading forums)
- tap area to go to the next / previous page while reading the article
- quick transition to full screen mode and back, as well as showing / hiding the action bar
- much more ...
apk View attachment ru.yanus171.feedexfork_0.7.9_107.apk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google play: https://play.google.com/store/apps/details?id=ru.yanus171.feedexfork
Github: https://github.com/yanus171/Flym\
This app does NOT synchronize with online news feed readers (i.e. Feedly)
This application is free, without ads, open source
Feedback and suggestions are welcome
Amazing! The best of its kind!
Flym Fork is everything I wanted a RSS reader to be. It's interface is very similar to Flym which I was already using when I discovered Flym Fork. I prefer Flym Fork because it is updated regularly (basic Flym hasn't been updated since march 2017).
I can easily filter RSS feeds with keywords. I can customize the RSS lists like I've never been able to before (I can see a picture preview, the title AND a preview of the content).
I'll subscribe to this thread with hopes that this app will grow with even more options!
---------- Post added at 12:27 PM ---------- Previous post was at 12:08 PM ----------
Hey there, I noticed a strange issue but I'm pretty sure I am doing something wrong. It would be nice if someone can explain what is my issue.
I'll show it with a simple example :
https://www.kijiji.ca/rss-srp-meuble-de-jardin/saint-hyacinthe/jardin-de-ville/k0c686l1700151r20.0
It returned nothing within Flym Fork BUT I can see one entry from it's original http URL :
https://www.kijiji.ca/b-meuble-de-jardin/saint-hyacinthe/jardin-de-ville/k0c686l1700151r20.0
Today, I deleted the feed and entered it again. Now it shows the entry.
I wonder if a "restart" feature would be useful for this sort of scenario. I see many advantages for it :
if I accidentaly deleted entries and I wanted them back, I could hit the restart button on this specific feed and everything would be trashed and loaded back again. Right?
Talking about deleted entries, maybe a trash bin with a custom cache time (like 24 hours) would be useful?
I'm just throwing ideas in. If there is already an option that allows to do what I want, I would be glad to hear how to do it.
Thank you!
Hello !
A RSS-reader is one of the main - and the key apps I use on a daily basis. What I mean by "the key app" is that I highly value being up-to-date with all of things I find interesting and important.
Over the years I've been using several RSS-clients. At some point I've met one particular app which seemed promising - but over the time ads were added and using the app wasn't convenient any more. To make matters worse splash-screen has been introduced - which also slowed the app (in the long run I find very important to be able just to instantly open an app).
So I needed the research again - to find another RSS-reader which could be right for Me. During the research one thing I found strange: several apps looked pretty similar to the one I've described before. Soon I've discovered Flym and its various forks, i.a. FlymFork by Yanus171. I picked a few which seemed most promising and contacted their developers (including the original app), equipped with some insights and key-requests which I've found crucial (like - for example - being able to enlarge text-size or switching articles by volume buttons). Only one person answered - that way I've discovered an app which I use to this day. Moreover, the app is more and more convincing and appealing - because new features are introduced, which also make a big difference in terms of both usability and user-experience as such. This is also why I am interested in this app's development: I'd love to see it growing, being more user-friendly (especially regarding average users, which requires a proper attitude) and a little bit more elegant and flexible. All of that is My dream which I'm brave to have because of how promising the app is now - and its Developer seems to be open-minded, generally responsive to various requests, ideas and loose thoughts.
What I find most useful so far:
User-friendly text size:
You can enlarge both article's - and articles list' text size - separately (which is important). It is crucial for Me because of limited vision/eyesight, I highly need big text and only in FlymFork I've found sufficient level of text size in articles and articles' lists. I guess there are not many users with limited eyesight out there - but that "trivial" tiny thing like enlarging text-size to pretty big may be crucial and final factor allowing some users to just using the app, let alone using it conveniently.
Convenient reading:
switching articles by volume buttons, "tap areas" and remembering the position of reading per article. All those features are fundamental in terms of usability, how easily and fluently You can use the app. I use volume buttons to switch next/prev articles - and combine it with tapping on top or bottom of the screen to scroll it up/downward. This way You can browse/read articles very easily and quickly - especially given that displayed articles are automatically marked as read. I find especially amazing that by tapping the top or bottom area - it scrolls exactly the whole content of the single screen - no matter where I've scrolled it before. Besides it's very convenient to have that ability to scroll the text exactly one page down/up - in case if You use volume buttons not to scroll, but to switch articles. On top of that FlymFork remembers where You've stopped reading all the articles - which is also very helpful.
Killer feature: Important Articles (so far it is known as a filter "mark as starred"). I subscribe several RSS channels and browse them when I have some "spare time" between other - main activities I'm highly into. As I've mentioned before, it's important for Me to be up-to-date with all I find interesting (several matters represented by favorite RSS channels). As far as subscribed channels are concerned, among these You may find information which You consider high-priority (maybe it requires an urgent action/checking out/etc.). One example could be posts on time-limited offers: if You check RSS news only from time to time (like Me, during "spare-time-windows" ) - it's easy to miss any urgent info. But if You'd be notified right after that kind of high-priority info shows up - it could be a game-changer. In other words: regardless of how often You are able to check the (RSS) news - You no longer miss anything important.
Read It Later (so far it is called "starred items"). My approach to RSS is that sometimes I have the time to read something - or just to quickly browse articles to pick up potentially interesting ones to read later. A wonderful thing is that I can put interesting articles "on the buck burner" with the certainty that they won't dissapear - regardless of time span I chose in the app's settings. This is another feature I find crucial in terms of how much this app is really helpful and useful in everyday life, fitting in various lifestyles (more or less time to read).
Kind requests - what I think would be a good idea to implement and make the app growing:
I. Nomenclature - be more user-friendly.
I think there is a lot of room for improvement in terms of how the app communicates with users - especially keeping in mind average users who just want to be up-to-date with all they like/they are interested in. No need to be a computer geek, power user, etc. I'm sure there are many users who don't know what RSS is - but would be definitely interested in being in touch with all which is important to them (via RSS channels). It would be sufficient to supply an app which will communicate with them using non-technical language, this way being more comprehensive, avoiding various potential confusions derived out of "non-technicality". I think this is a good idea to care about average people - not only users with the knowledge, however basic or advanced. I'd like to see the app which I could use without knowing all the technical details - FlymFork would be excellent being that way - and in the same time maintaining more "geeky" features somewhere "under the hood" (like - for example - handling websites with no RSS feed!). As a result both user-bases would be content: power users with their needs - and average users with almost no technical knowledge and nomenclature in mind.
Moreover, by implementing various "touch-ups" within the nomenclature itself the app would become more human = more friendly. And this would be one of key-factor to choose FlymFork instead of any other app.
I would suggests several touch-ups:
Rename "Favorites" as "Read It Later".
I think it would be definitely more precise and understandable than "favorite". Imagine You are an average - non-technical user. Then imagine You see "Read It Later" option in the app: it's very easy to know what that feature is for. But why I (or an average user) could "mark something as favorite"...? I think it would be much more convincing to put it as "Read It Later".
"Articles" instead of "entries" or "posts".
This one is a request of similar mold as previous one. Although there are many users (programmers? ) who are accustomed to name things as "entries"/"items" - there are even more users for whose it would be much more friendly to name things simply as "articles": more human, more understandable, without need to think "Do I really know for sure what does 'the entry' mean?". So I highly suggest to change "entries" into "articles" app-wide, everywhere where a word "entry" (or "entries") is used - to change it into "article/articles". For example, instead of notification message "XX new entries" I would suggest "XX new articles". Moreover, for FlymFork to be more friendly I would love to see it put as "You have XX new articles to browse." . It would be so exciting to use an app which is so friendly - on a daily basis ! Small change, but big impact - I'm sure the angel (not the devil) is in the details .
"Updating (which could take some time), please wait..." instead of "updating" - and "You have XX new articles to browse." instead of "XX new entries".
While updating, FlymFork displays two notifications: one is displayed only temporarily and contained originally only the time of the update - the other informs how many new articles has arrived. Since the temporary one is often displayed even a few minutes - it could be a little bit confusing. Fortunately now it has been changed into "updating" - now I know what is happening and why I'm still seeing this notification on the bar. To make it accordingly more friendly (as I've pointed out earlier) I would suggest to change sole "updating" into "Updating (which could take some time), please wait...". This way there is no place for any confusion or uncertainty on what is happening - moreover, users are now prepared that updating can take some time, and it's not complete yet (and this is important information). When updating is complete, FlymFork displays a notification "XX new entries" - I would suggest to change it into "You have XX new articles to browse." - again, to make it more human/more friendly/more understandable. I think many users would appreciate it.
"Important Articles" instead of "Mark(ed) as starred".
I refer to the 'Important Articles' concept I've mentioned before. Many people would benefit from this feature if it would be clear what is it for. I think what would help is to rename it from "Mark as starred" (in the filter configuration) / "Marked as starred" (in the notification) - to "Notify on Important Articles" (in the filter config.) and "New Important Article" (as notification).
"Full articles instead of excerpts" instead of "retrieve full text" - again: more understandable for average users.
If I will notice another instances where we could have the app communicating with the user in a more friendly way - I'll let You know, but those above are essential because they are most often seen by users while using the app.
II. Multiple fonts.
I think the more flexible an app is - the wider user-base it can reach (because it can meet more individual tastes). Ability to change the article font (as well as the font of articles' list - it may be one setting for all) could make more users smile . For example, I would especially recommend the font "Lato Light" for it resembles widely known "Roboto Light" propagated by Google, but in My opinion is more "fluid" and elegant - or less "edgy", to put it differently. Wherever I can, I use Lato Light - it could be great to have it here ! More information on Lato font You can find here (I recommend to read the 'about' section for those who are interested in typography - You will find interesting information there!): fonts.google.com/specimen/Lato.
III. Progress bar.
With limited sight I could barely notice its existence - but it looks like great idea, to have that subtle progress bar accompanying reading and indicating how much we are engrossed in the content . I think this bar would be, however, a little bit visible - and still subtle (I'd love to be able to set My own color to it!). Now the hour displayed next to it is so tiny... The progress bar being so small has no use for Me - but it does would be useful if a little bit bigger and placed on the background (of the color according to app's theme). BTW, not everybody is interested in being always informed what time is it - so it would be definitely great to be able to turn off displaying the time alongside progress bar somewhere in the options.
IV. FTP synchronization.
Although this is not crucial - I think it would be something making FlymFork considerably standing out, especially if You consider that FlymFork "does NOT synchronize with online news feed readers (i.e. Feedly)". I think it would be much better to be able to synchronize several things over the FTP. I saw that feature in Anki - an Android app to memorizing. On one side it has its own cloud with the synchronization service - but on the other it offers its users an ability to synchronize via their own FTP server (!). I find this feature amazing and - although I'm not a developer - I guess it would be done: to implement synchronization via user-defined FTP server. It should synchronize everything needed for fluent, transparent usage of FlymFork on multiple devices. An ideal effect should be not to feel that anything changed when You grab another device. So we need synchronization:
[*]List of subscribed RSS feeds/channels.
Status of reading (which articles are read, which not yet - and which are marked as starred/Read It Later - plus notification on Important Articles).
Position of reading per article.
Last viewed article (if enabled in settings).
Also FlymFork should notify if any problems with accesing an FTP server occurs - as well as on successful synchronization. Besides, it would be good to be able to choose the synchronization's interval somewhere in settings.
I'm not sure if would it be possible but maybe You could add a Google Drive as another place to synchronize?
V. Localization.
Although I'm all right with using the app communicating in English - I know there are many users who don't know the language, using their own native one. In My case it is Polish - and I would be interested in translating the app into Polish in order for FlymFork to communicate in this language when Polish Android instance is detected. What do You think about it?
Bugs:
Multiple "External link" items on the sidebar.
Using the app over the time there are many "External link" items on the bar - which contain an error message ("Error: attempt to invoke...") and seem to be useless. If I suppose correctly that they are not necessary - it would be definitely great to hide them in order to the sidebar not being littered.
"Setting up automatic marking of articles as read while scrolling the list".
I can't find or observe this option in action - where is exactly located? Is it possible to turn it on/off? If no, would it be (I think it would be a good idea)?
I wanted to cover all topics but I think it would be better to publish it now and add any further remarks at some later point - this way You could make FlymFork better earlier . So I hope You find the ideas described above useful.
Kind regards,
Thomas Leigh
First of all thank you for app reviews. They will infulence the app development.
volt26 said:
I wonder if a "restart" feature would be useful for this sort of scenario. I see many advantages for it :
if I accidentaly deleted entries and I wanted them back, I could hit the restart button on this specific feed and everything would be trashed and loaded back again. Right?
Click to expand...
Click to collapse
After you have refreshed the feed the last update time is remembered, and the subsequent refresh will only load the articles after that date|time. There is a Delete all option in artcile list menu which also resets the last feed date time. After that operation, subsequent refresh will load all articles that exist in the feed. But there may be loaded articles in FlymFork, which do not exist in feeds (feed contains only last several articles). Such artciles would NOT be loaded after Delete all operation
TJMulder said:
"Setting up automatic marking of articles as read while scrolling the list"
I can't find or observe this option in action - where is exactly located? Is it possible to turn it on/off? If no, would it be (I think it would be a good idea)?
Click to expand...
Click to collapse
Long tap on feed and check Show article text in list. In this mode atricles are makred as read automatically while scrolling (It was a bit hard to realized that feature). This mode is very usefull to with short text articles, like forum post which have RSS. (But now it is possible even without RSS)
Buy the way in the next app release View attachment ru.yanus171.feedexfork_0.7.2_100.apk there will be a new feed setting Load type that allows to load the url not as RSS, but as webpage. So we can load the articles from webpages which do not have RSS In such a case all web page links are loaded as articles, and the url is also loaded as article too (It isritythe first). To reduce the amount of links the filter should be applyed to feed. You'd better temporaly turn on Show articles url setting for that.
It is very handy to filter using regular expressions checkbox. But I realize that requires advanced knowledge. But you can mail me and I will give you required regexp filter for your page.
yanus171 said:
Long tap on feed and check Show article text in list. In this mode atricles are makred as read automatically while scrolling (It was a bit hard to realized that feature). This mode is very usefull to with short text articles, like forum post which have RSS. (But now it is possible even without RSS)
Click to expand...
Click to collapse
Thank You for pointing out. Indeed it works - and it works in a gently way: not marking articles as read just after they disappear from the screen, but a little bit later (scrolling-wise).
It is amazing feature and it would be excellent to have it working in the "Unread" list, would it be possible? I mean article text displayed also in the "Unread" list, alongside marking them as read while scrolling.
I am getting an error with this link archstrike.org/rss/news
Code:
At line 45, column 264: undefined entity null
github.com/ArchStrike/ArchStrike-Website/issues/6
Zragon said:
I am getting an error with this link archstrike.org/rss/news...
Click to expand...
Click to collapse
Try this version https://drive.google.com/file/d/1dDzBRh9zDe1DT_Gu-00SE-hla2i8A1sb/view?usp=sharing
TJMulder said:
Thank You for pointing out. Indeed it works - and it works in a gently way: not marking articles as read just after they disappear from the screen, but a little bit later (scrolling-wise).
It is amazing feature and it would be excellent to have it working in the "Unread" list, would it be possible? I mean article text displayed also in the "Unread" list, alongside marking them as read while scrolling.
Click to expand...
Click to collapse
Yeah, i have about 90 feed sources and receive 1K news to read.
I need something to sort out what i need to read and save what i will read (read later feature will be really useful too)
I'm currently using Aggregator RSS (https://play.google.com/store/apps/details?id=com.tughi.aggregator)
I recently noticed flym fork. I's really good.
Take a look at Aggregator, maybe you'll find something to implement in flym fork.
I use RSS everyday.
Thanks for your app.
4Freedom said:
Yeah, i have about 90 feed sources and receive 1K news to read.
I need something to sort out what i need to read and save what i will read (read later feature will be really useful too)
Click to expand...
Click to collapse
What about set as favourite button?
4Freedom said:
Take a look at Aggregator, maybe you'll find something to implement in flym fork.
Click to expand...
Click to collapse
Maybe YOU will point me to features usefull fo YOU?
By the way here is new version View attachment ru.yanus171.feedexfork_0.7.9_107.apk
- min auto update battery level
- setting to not display read article count
- language select setting
- font size sttings were enlarged
- Android 8 compability
- bug fixes
yanus171 said:
Try this version drive.google.com/file/d/1dDzBRh9zDe1DT_Gu-00SE-hla2i8A1sb/view?usp=sharing
Click to expand...
Click to collapse
Tested and working.
yanus171 said:
What about set as favourite button?
Maybe YOU will point me to features usefull fo YOU?
Click to expand...
Click to collapse
Yes, of course.
Here is a list of point about why I am using Aggregator right now.
It does not want to be a criticism for its own sake, but a list from which to take inspiration.:good:
LONG PRESS on feed list allow me to "mark as read", "create exclusion rule" and "share".
WEBSITE ICON option to view website icon instead on letters/images (Main page) .
SPEED It took about 7 minutes to fetch all feeds, vs 1 minute by Aggregator.
NETWORK USAGE 90MB used vs 3MB used by Aggregator. EDIT: Probably related to images.
GUI I think Aggregator has a better implementation of the material design guidelines (Layout/Icon/Menu/Sidebar) .
Custom refresh interval per feed?
Hello, I still use Flym Fork and I love it! It's that great!
I do have a feature suggestion that would totally change the game for me (and probably other users) : can we set a custom refresh interval per feed? I have some feeds that must be refreshed every 5 minutes while some of my other feeds can be refreshed once a day.
Right now, EVERYTHING is refreshed on the same timer.. It generates a lot of useless refreshes on some of my RSS feeds. It generates data and battery usage that I can avoid.
Thank you!
Flym Fork+TTS
Flym Fork is amazing app. I promised to write something how I use it. So:
I have some RSS sources with interesting articles, but no time to read. But when I travel or do something boring housework, I have time to listen.
So I often use menu option "share all text" and send them to @voice app. (Resp. option @voice add to list".)
I collect list of interesting stories and when I have time I listen it.
If you want use @voice, you need good TTS system with good natural voices. For me is the best option "Vocalizer", where I bought some good voices. (For English I like UK English Serena, for Czech language Iveta.)
I also use it for reading books in FBreader and "Cool reader" apps.
That is all Flym Fork is one of my most useful app.
Best regards
Pavel
I have two issues.
#1 soompi.com/feed
I set it to retrieve full text but I'm getting an error 404 instead.
#2 feeds.feedburner.com/TheHackersNews (from thehackernews.com)
Full text works but this content extract rule does not work:
Code:
thehackernews.com:id=articlebody
Hi guys.
First thanks dev, this app is awesome.
I just experience some trouble with the widget which is not updating. Any idea?
I'm on EMUI Oreo with Lawnchair launcher.
Tried to disable all battery oriented settings for both the launcher and this app without success.
Is there something I'm missing?
Thanks for your help.
Miaou
Did you tick the option to let the app always run in background aside from disabling battery optimization? I had trouble wirh some messengers if that wasn't enabled.
x2k13 said:
Did you tick the option to let the app always run in background aside from disabling battery optimization? I had trouble wirh some messengers if that wasn't enabled.
Click to expand...
Click to collapse
Yes, the app updates well, it's just the widget which is not updating
Hello @yanus171,
at first thank you for Flym Fork (Handy News Reader). I did a pull request for the german translation update. Would you send me a beta please to check if all strings are right?
Thank you and happy christmas