I just bought this off ebay but everything is in chinese, is there a way to flash it to english? I am not even sure if the magician is the dopod 818, is someone could help it would be great! Also active sync nor my can my pc pickup the phone, do i need a driver or something?
yes your phone is a magician...you can flash it just follow the steps in this link
good luck...
thank you! one more question, the english seems to be messed up, is there another english version i need? It says like vrigad 29, december instead of friday and oktober instead of october.
you can set it at...
Start > Settings > System [Tab] > Regional Settings
then just change it to English...
Related
Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
Hi all,
I just bought my German language mda compact II. I thought I was buying the old mda compact and I could change the language to english.
Is there any way to change it to English? I think I wouldn't even mind going back to windows mobile 2003 se either.
thanks
Andrew
Change your ROM to WWE is a best solution for you! Check this link to download WWE ROM for your Device :lol:
Good luck!
Sorry, here it is:http://www.iris-global.com/t_mobile_download/index.html :lol:
Good luck!
Thank you!
I downloaded the file but when I tried to install it it said it has a vendor problem. It is a german t-mobile phone. Could you help me how to get arount this problem? Now there is no ruu.conf file like in the case of mda compact.
Thanks
Andrew
It not a problem. Use ROMUpdateUtility_Wizard_NoID.exe.
telemix said:
It not a problem. Use ROMUpdateUtility_Wizard_NoID.exe.
Click to expand...
Click to collapse
Thanks. I tried MaUpgradeUt_noID.exe but that one doesn't work with the windows mobile 5. Where can I get ROMUpdateUtility_Wizard_NoID.exe?
thanks for all your help
Andrew
Wizard_RomUpgradeUtility_noID.rar
Thanks for the info very much!!!
THANK YOU THANK YOU THANK YOU
IT WORKED!!!
now I can finally use my phone.
thanks again
Got "Error [240] : File Open"
telemix said:
Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
Hi there,
after I run it on my PC, I got the error "Error [240] : File Open"
Don't understand what can go wrong ?!
Can you please kindly help !!
//Genc
I broke my sister's XDAmini .. I'm going to be punished
i have an XDAmini in german and I want to instal on it Windows 2003 SE in English. while trying to instal Win93 Se English on it, the instalation faliled with the language error.. The XDAmini is empty now.. Does this file ROMUpdateUtility_Wizard_NoID, work in this phase, when the XDA's ROM is empty ? I tryed to run this program, it starts, but I get the error that my device is not connected ..
I tryed to put back on the XDA's ROM Windows 2003 german version (i'm not shure it's the same version that was originaly on the XDA) but I still get the "Country ID" error ..
Please help me.. and tell me what to do
Re: I broke my sister's XDAmini .. I'm going to be punished
djbigice said:
i have an XDAmini in german and I want to instal on it Windows 2003 SE in English. while trying to instal Win93 Se English on it, the instalation faliled with the language error.. The XDAmini is empty now.. Does this file ROMUpdateUtility_Wizard_NoID, work in this phase, when the XDA's ROM is empty ? I tryed to run this program, it starts, but I get the error that my device is not connected ..
I tryed to put back on the XDA's ROM Windows 2003 german version (i'm not shure it's the same version that was originaly on the XDA) but I still get the "Country ID" error ..
Please help me.. and tell me what to do
Click to expand...
Click to collapse
get to the phones bootloader and connect it up to usb, run the MaUpgradeUt_noID.exe (ROMUpdateUtility_Wizard_NoID is for wizard and charmers) to remove the ID checking. go back to the bootloader and you should be able to install any magician rom package. you dont need an activesync connection for it to work, just be in bootloader with 'USB' in the corner once youve connected it.
i all,
i need to know how old my software is i have:
rom:1.0.7.0
operator:1.6.312.4
radio:4.0.13.17_01.04.00
on a qtek 8300...
is there any newer version? language and t9 in portuguese ?
thanks...
ur software is very old, rom 1.0.70 is old, you should be at least on 2.0.x.0
login to myqtek.com and get the upgrade!
wow...
thanks, i've already try that, but it says my imei in not valid.
my mobile came from dangaard, but i'm from portugal... i send a mail to the place where i bought the phone and they said it was from dangaard!
Dude, that rom is old. Here is a link to download Dangaard/qtek rom version 2.0.9.0 for qtek 8300.
http://rapidshare.com/files/25367924..._Ship.zip.html
many thanks for that.... bu i'm getting file not found on rapidshare...
one more question... will i have portuguese language on menus and on t9?
many thanks
Paulo Fernandes
Sorry, I guess that link expired. I have reposted to rapidshare, and here is the new link:
http://rapidshare.com/files/27726683/TO_DAN_NOR_2090_263111_020900_Ship.zip.html
I don't think that Portugese t9 is available on this rom. But I have attached a cab file (from [[cold]]) that is supposed to install portugese t9.
good luck.
no luck
well it seems that this phone is not from dangaard...
i got the "invalid vendor id" error... what should i do?
application unlock and super CID unlock. search forums for methods, but let me know if you are stuck.
but my phone is not sim lock...and i'm able to install all the apps that i've tryed...i cant't find the cid unlock, could you give me the link...
sorry to be asking all this but i just e wanna be shore that i do things the right way... this phone is 1 week old :|
Well, you're able to install anything you have tried, except the ROM upgrade
SIM unlocked is different than application unlock and CID. Be warned that CID unlock will invalidate your warranty, probably new ROM also will. But the new ROM is worth it, imho. Here is a nice guide describing unlocking/upgrading procedures for 8310, which will also work for 8300:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
well i haven't think about the warranty... what would be the main benefits of the upgrade?
battery? signal strength ? software?
well, the main advantage that I like is being able to use a2dp (wireless stereo), radio upgrades, but others like push email and other stuff. I guess if you are happy w/ your old ROM there is no sense in changing it.
well my main problem is the battery ... it last 2 days. and wi-fi connection to wpa networks
my battery life is about 4-5 days, and I use wifi quite often on secure and wpa networks without problems.
follow the instructions given here and nothing can go wrong:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
Hello-
Something similar has probably been asked and answered before but I haven't been able to find it, so here goes.
I have purchased a Kaiser from a retailer here in Sweden who told me that I could change it to English when I first start it up. I received it today and found that of course that's not true.
I have tried running the RUU for ROM 1.56.405.5 but it gave me a 294 Invalid Vendor ID error. I assume this may be because the language currently on the device is Swedish. Do you have any suggestions.
thank you.
you need to cidunlock the phone..
then you can install from another vendor. (there´s posts about that in the forum).
Hi.
I bought a MDA pro (qtek 9000 etc)./
But it is totally messed up by the previous owner. I tried to install windows mobile english (it has windows mobile 6.1 german). But it says it isnt the right software for the device. And the phone function doesnt work.
Can someone please help me with how i can make my phone function work and change the language to english (german is the only installed version).
Specs:
3G
Unlocked.
Please, who can help me???
Dominick
this post here:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Is the easiest way to learn what your doing to flash a new WWE Rom,
Thank you,
I have a english version now (yEAH!!!!)
But i still have the error NO GSM. (but other numbers on the screen: d 2.61 29 wwe
Who is familiair with the error and knows a solution?
ERROR 114?
Do you receive a "error 114" when loading a radio ROM? I've had the "NO GSM", "ERROR 114" since 2005 on my XDA Exec. Unfortunately, I have yet to find a solution. There is some info. on this error that can be found, but not much, and no success stories...SORRY...However, I'd be forever grateful if you did discover a fix and I'm sure others would be too; if you shared it. Good Luck!!
u can ask for a solution through MTTY .. maybe someone can help u format the radio rom and reflash it or something
i'm no expert, but i think some expert can give u a code to use in MTTY to do that
Hi,
I would like to thanks everybody for his or hers help.
But i filed a complaint where i bought it and i could bring it back and i recieved my money back.
So i think this thread is ready for closing