I will get o2 xda neo from germany.
I would like somehow upgrade it to English version.
I already know it is G4 model so 0001. and it is probably locked because it is new.
I read much of forum and I found only one way to upgrade it.
http://en.pdamobiz.com/en/forum/foru...p?TID=440&PN=1
is that the only way and the only rom I can use if my pda is locked?
Sorry because of my stupid questions. I'm new.
so anybody? I need help
dtusek said:
I will get o2 xda neo from germany.
I would like somehow upgrade it to English version.
I already know it is G4 model so 0001. and it is probably locked because it is new.
I read much of forum and I found only one way to upgrade it.
http://en.pdamobiz.com/en/forum/foru...p?TID=440&PN=1
is that the only way and the only rom I can use if my pda is locked?
Sorry because of my stupid questions. I'm new.
Click to expand...
Click to collapse
use awizard tool.
fisrt ,you need make a nba format rom file . use typho5.exe cmd break an offical nbf format rom, you will get the 80040000-OS.nb file, modify it as 80040000-OS.nba. then use awizard tool updata your neo. it updata you os rom only,so it's safe.
ypsys said:
use awizard tool.
fisrt ,you need make a nba format rom file . use typho5.exe cmd break an offical nbf format rom, you will get the 80040000-OS.nb file, modify it as 80040000-OS.nba. then use awizard tool updata your neo. it updata you os rom only,so it's safe.
Click to expand...
Click to collapse
Could you write something more about it?
Step by step instuction or something.
I'd love to change rom in my o2 xda neo G4 to english version.
rydzo said:
Could you write something more about it?
Step by step instuction or something.
I'd love to change rom in my o2 xda neo G4 to english version.
Click to expand...
Click to collapse
SORRY ,My English very poor. follow me,i hope you can understand.
1. download the files.
awizard & typho5.exe
2. download an eng offical (prophet)ROM file from xda ftp , and extract it ,then you will get the NK.NBF file.
3. copy typho5.exe and nk.nbf files to c:\
4. start > run> input "cmd"
5. this folder "c:\" on dos, input typho5 –v –x nk.nbf
wait..... you will get the 80040000-OS.nb file from c:\
6.Modify " 80040000-OS.nb" to "80040000-OS.nba" (add " a " word )
7.put the 80040000-OS.nba file into awizard\ROM\
double clik awizard.bat file, see about awizard tool writer's "readme" file.
Q1 : How to flash ROM file to device:
1.run option 'e'
2.run option 'u'
(after program perform finished, you must confirm your phone restart itself )
4.run option 'w' (choose 80040000-OS.nba) and enter
wait..... until pc display show over,then you reset your phone.(hard reset)
work finished , your phone is eng platform now. but the extended_rom need modify ,next time tell u.
do you undertand my above means?
No, there is no need to use any thirdpartytools.
It was no problem for me to upgrade my Xda Neo with the 2.15-O2-Rom directly to the 2.20-Qtek-Rom (could be found on FTP-server).
crazyd said:
No, there is no need to use any thirdpartytools.
It was no problem for me to upgrade my Xda Neo with the 2.15-O2-Rom directly to the 2.20-Qtek-Rom (could be found on FTP-server).
Click to expand...
Click to collapse
yes ,if your ipl_spl version lower than the updata rom version,use the romupdatauitlity "next--next--next-flash....." could be successfull . if u downgrade contain ipl_spl 's rom,your phone will not be reboot (g4 phone).
awizard tool updata your rom only , any os roms can be used. it's useful tool for g4 machine
crazyd said:
No, there is no need to use any thirdpartytools.
It was no problem for me to upgrade my Xda Neo with the 2.15-O2-Rom directly to the 2.20-Qtek-Rom (could be found on FTP-server).
Click to expand...
Click to collapse
I couldn't do it your way.
I did it ypsys way.
THANKS!!!
Now it's time for extended rom.
Any tips???
rydzo said:
I couldn't do it your way.
I did it ypsys way.
THANKS!!!
Now it's time for extended rom.
Any tips???
Click to expand...
Click to collapse
here you go.
I have "Qtek_wwe_ExtROM_v2.20.7.114" EXT_ROM only, cooperate the same OS version is the best. if you want to get your currently EXT_ROM version ,maybe need other same version users use awizard tool backup it for you.
This is the EXT_ROM replacement method :
1.download "ext_rom unlocker ,extended rom,Total Commander", then copy these files into your phone.
2.on your phone, run "ext_rom unlocker.exe" first;
3.install "Total Commander.cab",then run this 'Total Commander' program.
4.In 'TC' interface，click "show">"Singe window mode">choose "Two window mode", then input "\extended_rom" in the top of the blank row 。it will show the hiding files, click one file, then click "show">"select/unselect files", input " * ", click "select", click one file and hold on press,then delete all files. in the row below ,open the Extended ROM folder ,copy all files .click "Copy to Clipboard". then paste these files in above window. select this new files, hold on press , select "Properties" , in front of the "Read Only", click twice,click "OK", do the 'hard reset'.
over.
don't work
5. this folder "c:\" on dos, input typho5 –v –x nk.nbf
this doesn't work
Rydzo, could you give exact link to ROM (ftp) you used?
Thanks
Slawek
slawje said:
Rydzo, could you give exact link to ROM (ftp) you used?
Thanks
Slawek
Click to expand...
Click to collapse
i don't remember wher I found it, but here is excacly the name of the file:
RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship.rar
I am surprised that ypsys's method actually works on G4 Prophet. Can someone please double confirm it? rydzo anyone?
The reason that I am in doubt because ypsys's method of using awizard includes step to CID unlock from the 'u' command, which does not work on G4 Prophet. I download the latest awizard tool and the readme clearly says that the tool will try to force unlock CID in every write option. Won't that cause any harm to G4 Prophet?
kjliew said:
I am surprised that ypsys's method actually works on G4 Prophet. Can someone please double confirm it? rydzo anyone?
The reason that I am in doubt because ypsys's method of using awizard includes step to CID unlock from the 'u' command, which does not work on G4 Prophet. I download the latest awizard tool and the readme clearly says that the tool will try to force unlock CID in every write option. Won't that cause any harm to G4 Prophet?
Click to expand...
Click to collapse
yes, I was suprissed to
but it worked perfectly.
I've changed rom in 5 G4 prophets whithout any problems using this method.
Hi,
I'm a totaly newbie to HTC and CID so I do have 2 Questions.
1) Is there a ROM which does support wpa2-aes and eap-ttls ? I did not find a detailed description of the many diffrent roms.
2) if 1 == true how do I find out if my phone is CID locked without trying a rom update. Some said that every HTC Prophet G4 is CID locked and others only newer G4 are locked. My phone :
ipl 2.15.0001
spl 2.15.0001
GSM 02.19.21
ROM 2.15.4.47
thx
steiftier
if 1 == true how do I find out if my phone is CID locked without trying a rom update. Some said that every HTC Prophet G4 is CID locked and others only newer G4 are locked.
Click to expand...
Click to collapse
hi,
i too have similar confusion. I bought new Neo, with dopod rom already installed having following :
ipl/spl 2.15.0001
radio 2.19.21 (dont remember, may be 2.17.21 or some like that)
OS 2.15.13.27 WWE
Rom dt 3/09/06
Protocol 4.1.13.16
Ext rom 2.15.13.121
i only upgraded radio to 2.47.21, but then downgraded to 2.20.21 bcos it was eating battery so fast. still this radio is consuming more battery than my original radio which i had no backup. Is there any available source of only radio 2.19.21 ?
well main confusion remains intact--- whether my G4 Neo is CID unlock or not? I guess it is unlock as it already comes with dopod rom. I dont know right answer, may some senior help.
Due to this uncertainity im not flashing my Neo with
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
to get back the radio 2.19.21
should i do the flash with this?
please answer gurus.
thanx
nandlal
Ok guys,
i flashed my Neo with
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.exe successfully and now it got radio 2.19.21.
device is runing good as before and battery drain is as standard.
Related
I've tried another rom image for my mda compact 2 and now my mdac2 does'nt start any more.
I have tried several rom-images (for compact, atom, ewtc..), but I can install no one .
On the T-Mobile Homepage there is no Image for the MDAc 2.
Can anyone help me ?
I only come to the bootloder screen (red - green - blue).
I need a rom-image, that i can start from the bootloader.
thx
Try this link from TMO UK http://t-mobile.iris-global.com/download_manager_mda_com2.html
Success, M
I've already tried this, and it starts updating but then comes the message :
ERROR [294] : INVALID VENDER ID
THis Update Utility cannot be used for your PDA Phone.....
Maybe I have to unlock the CID first ?
But can I unlock the CID with the aWizard, when the Comp.2 is in the Bootloader mode (red-gree-blue) ?
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
In the unzipped folder is no file like RUU.conf.
Only RUU.dll and RUUREsource.dll
There are following files in the folder
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.xex
RUUGetInfoi.exe
RUUResource.dll
RUU.dll
And I've downloaded " nbfdec " , but I can not start this program.
I think i have to reboot my computer.
un zip all the files from the t-mobile package
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
download this and unrar and overwrite in the same folder.
connect up the phone in bootloader to pc and run the ..._NoID.exe
as theres no activesync connection it will pause for a bit on the checking existing rom but still let you carry on
ignore the picture of the wizard, just make sure your installing the right nk.nbf for the compact 2
I've exactly done what you said, the update ended with 100 % and now the device starts until the bootloader-screen (red-green-blue).
Have I done something wrong ?
What has happened ?
dave106 said:
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
That's the one I was referring to, thanks.
Bundy did you reset afterwards?
M
Yes, I did a Hardreset, a Softreset , but I only get to the picture with the 3 colors.
IPL 1.12
SPL 2.15
I'm terribly sorry, but we've ran out of my knowlegde of the MDA Compact II. So besides the usual question: have you ran the update a second time, for me this would be warranty issue.
Hope Dave is worth more.
Good luck, M
Yes , I have done the update a second time, but with the same effect - the device only starts in the three-color-screen.
So I think I can do nothing more ....
:-(
... I cannot install it on my device due to CID lock.
I have cracked the protection of ACE HELLAS but I don't know how to install it on my device. I tried to upgrade using aWizard, but the device won't boot.
What I have now is an .nba file with the patched ROM.
Please tell me how to install it on a CID locked phone so I can test it, and then I will post the ROM
Credits go to Marker who initially found out how to crack the Greek rom for the universal.
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
gpx said:
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
Click to expand...
Click to collapse
Thanks for your reply, but aku 2 roms only allow you to upgrade. In addition to this, I would have to find a way to convert an .nba file to .nbf .
I anyone has a Qtek device and wan'ts to try my file, don't hesidate to ask. I can upload my .nba on the ftp
Ihave unlocked my phone using the tutorial from
here
1. download http://www.htcamerica.net/support/do...22501_Ship.exe
2. extract "To_CWS_20130_284222_022501_Ship.exe" with Winrar
3. use "TyphoonNbfTool"
a. file---> open NBF ---> nk.nbf
b. tools ---> edit header data
c. edit only this -->
Secondary Version: 2.0.11.0
Operator: ORG_0402
d. file ---> Save as ---> nk3.nbf
e. delete original nk.nbf and then rename nk3.nbf --> nk.nbf
4. run "ROMUpdateUtility.exe"
Click to expand...
Click to collapse
All is oki but the problem is that it doesnt have french language. So i search for some other ROM to flash the phone, but after each flash i have the boot image and phone stops there. When i flash back to Cingular ROM phone is up and living.
I have observed that this ROM i have used have this second version 2.0.13.0 that is biger than all others 2.0.9.0 or 2.0.11.0. I have of course modified the flashes i have downloaded(since without modify, i canot flash) but nothing works.
BR
by the way i have read the faq about flashing SDA http://forum.xda-developers.com/viewtopic.php?t=60775
but the phone doesn't let me change the CID
Is ok, i manage to flash. I was write I have found one 2.0.14.0 from orange and it worked like a charm. the flash is in the forum, but as i am at work i will tell you what to search is something like Orange email.exe fail
Best regards.
One question how ever. If i manage to unlock CID, then i could flash with what version i want?? Like downgrade and stuff??
PS
Postul este aici
linkul este aici
C600 2.0.14.0
Hi,
I have been on this site for about a week now. I was drawn here by the desire to take my Imate JamIn up to WM6.
So I pulled from the web the file:
RUU_Prophet_220734_2207114_024721_NVID_QTEK and hurled it onto my PDA
It went from Imate to QTEK but still worked pretty well. So I then went and loaded Upgrade Happy from a site in Roumania.
This loaded but was distinctly unimpressive and unstable so I managed to downgrade to the WM5 file above again.
Then I tried Smart1's v2 WM6 file and this went on OK. However, I have experienced a few issues with the battery and other things like Timewizard, etc.
So I have gone back to the NVID_QTEK WM5 file again.
BUT I would really like to put back on my Imate ROM which I have stored away. Sadly, whenever I try and load the ROM it states that the version is lower and I can only do an UPGRADE ( I get a 286 error).
I have searched here and Google and think that I can Un CID my phone (not actually sure what this does mind). I have read posts suggesting that once done I can load any version of any Prophet ROM on my PDA.
I went off and ended up on PDAMobiz and pulled down a file called:
PDAMobiz.com_ProphetAKU2_unlockCID.rar
But this site is incredibly slow and the file is corrupt when I finally get it down.
Can anyone explain to me whether it is possible to get to reload my earlier ROM version Imate ROM? If it is can anyone explain what I need to do and perhaps put up a link to an area where I can pull the tools down.
This website has a great reputation for helping each other out and I am sure that my ignorance will be forgiven,
Kind Regards,
Sam.
Hi
This is because you have upgraded your ipl/spl and these can't be downloaded.
But don't worry it's not a problem
if you have the original rom you should have a .nbf file?
You can use typho5.exe -x xxx.nbf (whatever it is called) this will extract the individual elements (ipl/spl/os/extrom/radio/splash screens) as .nb files.
Then use nb2nbf to build a new nbf file without spl/ipl parts. copy this file back to your backup folder (rename the original one first) and install again
Good Luck
Thanks - I have just a couple more dumb questions...
FlykThewiz,
Many thanks for your help.
I have the file:JAMin_WWE_213923_2139123_022021_shi.exe
Do you know how I get the .NBF out of it?
Also,
You couldn't point me to the tools you mention could you?
If I do what you said then do I get back my own Imate Splash screen too?
Do you know if I will suffer any problems with things being different versions?
Once again many thanks I will let you know how I get on.
Kind Regards,
Sam.
You can use winrar (free download - search google if you don't have it) to extract the files in your exe.
One of the file will be the nbf.
I will sort out the instructions for you but I have to go out for a couple of hours at the moment.
T H A N K Y O U
flykthewiz,
You are simply The MAN
Many, Many thanks,
Sam.
I don't know about being the man - i had the same problem myself.
Attached is a zip file with the two tools you need.
I suggest you create a folder called c:\rom and copy the contents of your exe file and these to programs into it.
goto a dos cmd window and cd \rom
type "typho5 -x nk.nbf" (no quotes)
you will then have a number of *.nb files in c:\rom
rename nk.nbf to nk.org
send me the list of nb files you have.
ZIPPED with winzip 12
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Splash Screens
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
secoseco said:
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Click to expand...
Click to collapse
FlykTheWiz,
Thanks for the tools.
The files I have are as follows:
30/03/2007 13:50 59,768,832 80040000-OS_0.nb
30/03/2007 13:50 786,432 91000000-SPL_1.nb
30/03/2007 13:50 786,432 91000000-SPL_2.nb
30/03/2007 13:50 196,608 92000000-Splash.nb
30/03/2007 13:50 2,621,440 96000000-GSM_0.nb
30/03/2007 13:50 10,485,760 9b000000-Extension.nb
30/03/2007 13:50 65,536 9d000000-HTC.nb
28/03/2006 15:51 74,713,088 nk.nbf
16/09/2005 12:20 53,248 nb2nbf.exe
13/03/2006 19:09 784,972 typho5.exe
I have loaded up the nb2nbf file but have no idea what to do with it - The only option appears to be for a Tornado...
Thanks,
Sam.
Ok
fill in nb2nbf like the image in the attached zip file.
Important notes:
1. use the ... browse buttons to select your files and the length field will be filled in for you (the image shows mostly zeros)
2. the image name for the extended rom is Extension Rom (not Extended) and you have to type it manually - its not in the drop dow list.
3. the start address for OS.nb is 80040000 (not 82040000 which the program defaults to)
4. you need to manually type HTC Logo in image type - its not in the list.
Do not add the ipl and spl files! (these are the ones that are causing your problems)
When its all filled in click on Translate and when that is finished exit the program.
If you have copied all of the contents of your extracted exe to c:\ROM you should have a program called ROMUpdateUtility.
Connect your pda to usb and run this program and follow the instructions (you've done this before )
After its finished your phone will hard reset and you should have your original ROM.
It doesnt matter that ipl and spl are different versions
Good Luck
flykthewiz said:
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
Click to expand...
Click to collapse
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Yes you can
secoseco said:
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Click to expand...
Click to collapse
Nearly there
FlykTheWiz,
Many thanks for the instructions. I have done what you suggested with NB2NKF
However, When I try to run my RUU utility I get error code 238 Cannot Read the file.
I extracted all files into a single directory and replaced the default .NBF with my new one. Then ran the RUU tool.
Am I being a numpty?
Many thanks,
Sam.
hmmm
Try the appropriate RUU from the attached
If your ipl ends in .000 use G3 version
if ends in .0001 use G4 version
T H A N K Y O U
I would just like to thank you for your kindness and patience. I have now got the HTC device reblown to the original condition that I started from (with the exception of the IPL/SPL).
Using the G4 utility worked for me.
On the way I have learned a great deal and appreciate your assistance.
Thank you very much,
Sam.
No problem at all
flyk (definitely) thewiz !!!
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Mozzerr said:
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Click to expand...
Click to collapse
help for step by step help for change boot logo imate jamin
Hi all:
1. how to extract tools.zip on pc
2. my pda (i-mate jamin) and update smart1-new v2 . don't like change i-mate boot logo to Qtek how to change boot logo to original i-mate jamin?
thanks for step by step help.
"...a long while..."??? I don't think so!!! Still, your openess and willingness to share what you have learned in such a short while is refreshing to see on this forum!! I still say T H A N K Y O U ! !
flykthewiz said:
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Click to expand...
Click to collapse
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it