Hello! I have 2 S200 and one is Sync normally via Usb and the other is using local Areal, it simulates network! Both have the same Rom. But i need it to use the USB. On the S200 there in no USB to PC like on the 9600. Does it happen to someone, and those someone nows how can i put it on usb sync.
Thanks
Rom
2.10.7.24 PTG
02/09/2006
radio: 02.07.20
extrom: 2.10.7.9351
Related
hi i used to connecte xda to pc via active sync now i'm trying it with mda it's not connecting even the wince driver in device manager is ok! any one has an idea??plz
Try doing a soft reset and then start ActiveSync with the Get Connected option under Files and see if that helps.
HTH
Good evening guys.
My pc (Win Xp Pro) does not recognise my Qtek S100 so i can't upgrade my rom via usb.I have downloaded a recent rom from xda-developers/magician.... to do an sd upgrade method.My problem is that i don't know how to put the rom files from my pc to the sd !!! Ofcourse i have a sa card reader.
I tried a different s100 just to ensure that the cable and pc don't have any problems.Everything went ok.
I want to make the upgrade because i 'm stuck in a Serial V1.00 Screen.
Thanks in advance, and sorry for my english .
first install activesync
Check
usb cable
conect usb cable in diferent usb port.
check activeSync .
archive-conection settings- check box "usb conect" is activate..
Sorry for my english..but i speak spanish..
Saludos.
correct me if i am wrong but :
I want to make the upgrade because i 'm stuck in a Serial V1.00 Screen
Click to expand...
Click to collapse
seems like your device is in bootloader mode
My pc (Win Xp Pro) does not recognise my Qtek S100 so i can't upgrade my rom via usb
Click to expand...
Click to collapse
activesync will only find your device if booted with OS (operating system)
but however you should still be able to upgrade rom tru usb cable just hook up your device with the usb cable and dowload the correct shipped rom for your device and run it from your PC it should find your device and attempt to flash
good luck wiro
!Usb Device not recognised!
Thanks for your replies, but I said that i've connected another qtek s100 with my pc and my usb cable with success.So i have already installed the active sync 3.8.
As Wiro said i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
mmm
i sync
rename to
fixed.nb1
i change this and work men ..i copy in sd 512Mb whit
ntrw.exe
good lock ...
Suck me , it doesn't make any change if you give nb1 file different name!!
The s100 looks the extension and start to download from sd.! My problem is that i can't find any nb1 files from internet . The roms that i have downloaded (when extract) have ms_.nbf , nk_nbf , radio.nbf and some dlls and apps via windows upgrade-installation not via sd.
I made a sd back up from another s100 but when i put the sd into my qtek's sd slot says something like "sd download section 1 cannot update", maybe because it's from a different s100 with a different id so the proccess stops . REMEMBER that i can't back up my qtek because the xp doesn't recognise it ! Any thoughts?
Thanks for your replies
and
Sorry for my english
A little question for you expert guys !
I 've made a back up a rom from another Qtek S100 , but when i insert the card into my qtek the update stops because of the different rom ids, i believe . My question is :
could i change the rom id manually with an hex editor or some other tool ????
Mmm
for the id error
you need
ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe
you need connect to usb for this...
but you say that not connect to usb..
The one to publish the ROM is very dangerous...
i don't know this....
sorry..
Check Tools..
ftp://xda:[email protected]/Magician/Tools/
saludos..
thanks for the reply suck me
what do you mean when you say publishing the rom???
mmm
sorry
i want say..
the rom edit hex is very dangerous..
i **** a hp2210 with this system (hexedit)..
sorry but my english...
Bueno solo te quiero advertir que el metodo de editar la Rom con un Hexeditor es muy peligroso.
yo deje inutilisable una hp2210 con este metodo (hexeditor) ..
saludos...
Ok guys, Finally i fixed it.
With new rom , the pc recognise it and everything working good but with no backup battery (as it was destroyed when it went for swimming). It doesn't make any difference.
End Of Thread
My usb isnt working as well... What can i do?
Is there any way i can update it using sd cards?
arisxama said:
Ok guys, Finally i fixed it.
With new rom , the pc recognise it and everything working good but with no backup battery (as it was destroyed when it went for swimming). It doesn't make any difference.
End Of Thread
Click to expand...
Click to collapse
How did you do it? I'va your same problem!
hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?
Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.
ok, will have a try.. thx so much :wink:
link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist
Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !
i got same problems right now, any one help us please
I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks
Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!
ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.
Does anybody know where i can download the driver to my qtek s100?
I have just rebooted my pc and can not find the cd.
Thanks.
Driver for what?
Driver to get the qtek installed on the pc.
Look for program called Active Sync on google.
The program does not detect my ppc, even when i have plugged in the usb properly.
Thank you very much for the help, i figured it out
HI All
I m trying to connnect my i-mate jasjar with pc through usb cable but when i install the driver the message appears that the wizard cannot find the required software which software i need to install for connecting i-mate-jasjar with pc
We're going to need more info to help you better. Specifically:
1. What version of windows are you using on your desktop computer?
2. Do you have Microsoft Activesync installed on your computer? Download it from here and then give it another shot.
3. Is this the first time you're trying to connect your phone to the computer or have you done this before and has it suddenly stopped working?
Sounds like you haven't installed ActiveSync yet.
If you have vista download this: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
good luck,