Back to AKU 2.3 - JAMin, XDA Neo, S200 Software Upgrading

Hi,
I have AKU 3.2 installed on my prophet (G4 chip) but wud like to go back to 2.3 ROM which seems more stable.
Main issue with 3.2 ROM were:
a. Battery charging when device is plugged to computer.Sometimes, battery gets charged and sometimes, it doesn't.
b. Sometimes, device is shutdown automatically (typically when device is not used for 3-4 hours)....though it happends very seldom.
Could someone tell me how to do this downgrade ? Does my device needs to be unlocked for this ?
Thanks

Related

Problems with rom update

Hi all
First of all sorry for my grammer, english in not my native language.
I've tried to update my O2 XDA Neo with SMART1 WM6 Rom, i've download the file and started the "UPGRADE_ROM.bat" after installation finished i notice an error click then hardreset the phone, for a second on the display apear the HTC logo, after that the QTec blue screen with the IPL 2.15.0001; SPL 2.20.0001; GSM 02.20.21; OS 10.1.0.811 and then nothing happens. I hardreset the phone several times but so far no good. I come up with idea to go to bootload (holding camera button and pressing reset) and try to reflash it but the update_rom.bat says "No Device Connected" from there i have no idea what to do. I'm with MS ActiveSync 4.5 please help me.
the same problem with me i tried several methods to fix this problem but unfortunetely couldn't find any solution to fix it finally took my phone to the technical service.If you have quarantie I recommend you to the same thing.But never say them that I tried to flash a new rom because this breaks the quarantie.Just say my phone doesn't start.Don't worry they can't understand that you 've tried to flash your O2
Ok, things you should *do* before upgrading to WM6
Make sure that you have AKU2.2 (for instance RUU_Prophet_220734_2207114_024721_NVID.exe) installed _BEFORE_ upgrading to either AKU 3.3 (aserg for example) or WM6. This is in any case true for G4, most probably this goes for G3 as well, but I cannot say this for sure, since I do not own one.
If you happen to get stuck at boot screen because update process failed, grab the rom above and run it with USB plugged in, this will 9/10 of all cases fix your device.
No, I do not have a link to this rom, try to look for it yourself.
For the rest, happy upgrading
rom flash
make sure you disable your antivirus softwear and your windows firewall don,t use any extended usb hubs and you have cid unlocked it make sure let it do a full flash dont do enything else with your pc when you flash your phone good luck i hope this was usefull

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

problem IMATE JASJAR

How can I fix this problem, the phone does not want to enter into arrangements Booth, the problem is a program StorageManager, then it does not want to load win mobile, hard reset and give accordingly pressed 0, the phone off and nothing there, it even laptop recognized, please advice on what to do in this case, how to put it in standby Booth, so I can reinstall it.
Rom v V5.2.20931 WWE
Radio 1.14.10
Rom data-11/13/08
Protocol v-42.49.Р8
R 1.14
G 42.42.P8
0 D.07.70 RAN
problem is solved, I found the right combination of buttons, then came into phone mode flash, now works perfectly
please help!!! O2 XDA Exec - CANT OPEN
lm still in the official o2 rom wm5, but last week, l hv try to install a file "Xda_Exec_Upgrade_v1.30.162" through my computer (window 7), when i installing the file , l saw my xda exec's sceen is freeze!!!!! so l just unplug the usb cable through my computer, and soft reset my xda exec, but a worse thing happen. when it it start loading is freeze at the o2 screen with 3 line word at right down corner - ( R 1.09.00 ) , ( G 42.42.P8 ) , ( D 1.30.107 WWE ). And so strange, when l charge my exec there is no light showing, when l remove the battery the light is showing red. l hv put my battery to my friend exec it work!!!
so please help!!!!
1. screen keep freeze at o2 screen???????????
2. when remove battery, and then put it back and charge, the o2 screen come out immediately. without touch any button????? and no light showing.
3. only showing red light when remove the battery????
sorry for the poor english
please help.............
@ jeffeu : put your universal (exec) in bootloader then try to flashing (install) it again.
and do not forget to read xda-wiki -- universal (our device).
Try to activate bootloader and from there to flash, I have a problem with the Win Seven and flash only XP

[Q] custom 6.5 for polaris

hey dudes,
I finally managed to put a wm 6.5 rom with manila2D on my Qtek 9100.
Now a friend of mine also wants that stuff on his smartphone.
He has a HTC Polaris (Touch Cruise) which is running wm 6.1 dutch.
I told him it would be in english, but that;s no problem.
I managed to find a rom, but no matter what I do...I can't get in on his phone.
Could someone get me a step by step guide on howto do it?
I am gonna use this rom:
http://forum.xda-developers.com/showthread.php?t=554071
anyone wanna help
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
19rsn007 said:
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
Click to expand...
Click to collapse
whether you try to use Hard SPL V2 .. ?
for the perfect flash HardSPL , you must remove the sim & sdcards then run SDA ApplicationUnlock installed on your PC only then you can run the ROM Update Utility.exe to flash the hard SPL
hey!!
The SDA Unlocker did it's job...didn't even know I needed this!
HardSDL V2 Worked GREAT!!
My co-worker is really gonna like this.
After downloading the HardSDL in the attachment it was installed in a few seconds.
After that, installing the rom was piece of cake...WORKED LIKE A CHARM!

[Q] Huawei Y100 U8185 Boot on USB Connection

Hi,
I am trying to hack a Huawei Y100 so it can be left securely in a car to act as a wireless hotspot and also as a Wifi GPS device.
However, I have a problem when the Huawei is powered off and I plug in the USB cable, the device is booting into CWM (v4.0.1.5s) , whereas I would want the device to boot into Android.
Can anyone suggest a suitable idea on how to achieve this?
Cheers
Gavin
normal error in cm clockmod
all unofficial recovery y100 with error
cm v4.0.1 , 5.5 , 6 , 6.03
no battry charge signal and not fixed
you must use orginal recovery after you install and bacup any rom
the orginal one has battery signal but cant install rom or backup
if you need the orginal here:
4shared.com/rar/xh9PuYy1/official_recovery_u8185_or_y10.html
Hi,
I am successfully using the phone with CWM and battery management etc is fine - the phone is installed in a car and acting as a Wifi hotspot and GPS server.
I have also used the phone on battery only and experienced no signal / battery drain issues on o2 in the UK.
The only fix I would like is to stop the phone booting into recovery from cold when power is connected, I want it to autoboot Android - I believe this is a setting/configuraiton specific to using CWM.
Cheers
Gavin

Categories

Resources