Related
Hi All
I had a problem with my TyTN II camera it was showing horizontal and vertical lines. So i sent it for repair and they replaced the camera.
It looks like they have reflashed my device to a different boot loader and changed the CID to a HTC test device. This is a full production release device that I bought from Expansys UK
Once I noticed a problem when I tried installing TomTom from the CD. It gave me an error. "Unable to install application. Please update your device ROM to the required version before trying again." I checked Model No in Device Information > Identity and it shows "Kaiser" I am not too sure but I thought this was KAIS130 before I sent it for repair, can someone confirm what it shows on your TyTN II.
I then tried to flash the HTC WWE shipped ROM and it gave me invalid vender ID.
Went in to bootloader and noticed at the top of the screen it shows "Security Unlocked" see attached image I have never seen this before what does this mean.
mtty commands shows.
info 2
HTCSTEST1234 ‹q:HTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1300TS13HTCE
Cmd>
What does this security unlocked mean?
Will bootloader which is security unlocked be any use to the ROM cookers on here?
Should I complain and send the unit back to get reflased?
Just Flash HardSPL which can be found in the sticky's in Kaiser Uprading and your good to flash any rom you like!
That is what i was planning to do use HardSPL.
But will this mean i will not have a shipped ROM matching my CID if things go wrong in the future.
Can some one please confirm what model it shows on a TyTN II on Settings > System > Device Information > Identity
on mine (ITA version) Model is Kaiser.
If something goes wrong at this point you can just flashg back to the old SPL using the custom wrapper. Before you flash any ROM your best bet is to instal HardSPL your just asking for trouble if you don't period.
Dils, were you able to fixed your tomtom problem? If not, i suggest you send it back to HTC service center so they can fix your problem.
Hey guys,
I am a new comer in this forum. I have been trying to update my T-mobile MDA vario for quite sometime now. I have read almost all the guides and instructions in this site. But I don't know what problem I am having. I tried both TNT.1437.Wizard.Touch and TNT.1921_Wizard_TouchFLO roms. In both case the flashing got stuck at 99% and then showed an error 302. then I had to get back to my shipped 2.21 original rom and try again. I also tried XM6r3 rom. I don't understand what I am doing wrong. Please can anybody help me!!! in the guide I was told to flash with 2.26 rom. But whenever I try it it shows invalid vendor id error. ???? What to do now. Is it impossible to upgrade to WM6 in T-Mobile MDA vario. (I CID unlocked my phone following the guide) Any help will be highly appreciated. thanks
MDA vario comes CID locked.. Unlock CID..search for WST... wizard service tool and unlock CID first.
irisiris is mostly right, if you get the invalid vendor id error then you're probably still CID lock. You said that you CID unlocked it already, but it might not have taken. The part he was wrong about though is that WST can't CID unlock your phone, you need lokiwiz to do that which I'm assuming you already knew. However, WST can tell you if you're CID unlocked or not. Just run it on your computer and click the CID actions button and it will tell you if you're CID unlocked or not for sure.
EDIT: Actually I was wrong, mestrini did add CID unlocking to the latest version of WST. Sorry irisiris.
you guys are right I finally CID unlocked my device. I checked it with WST and it said it is unlocked. Now I am in XDA mini rom with IPL/SPL 1.05. now I tried to flash with official tmobile 2.26 rom. but I still get the invalid vendor error. Now what to do????
In case you haven't solved your problem yet, download this file. If the T-Mobile 2.26 is still in the single executable type file that it was when you downloaded it, use either winzip or winrar to extract it to it's individual components then extract this file and allow it to replace the file it needs to replace in the folder you extracted the t-mobile ROM to. Then, just double click on the file to start the flash. Just in case, the name of the file you're going to double click on is named ROMUpdateUtility_Wizard_NoID. This should solve the invalid vendor error.
So I have followed the guides, two of them conflicting each other (one tells me Wizard Love while other says Button)
So I pick wizard love because I did the factory update a few years back to 2.25
use loki3
run tmobile 2.26 and it fails
run the 3.08 and it works
try to install TNT roms... all get stuck at 99% except one but the rom doesn't work because I am still on windows 5.1
Now on my third attempt it gets stuck at bootloader. Can't get the phone to turn back on to normal mode just to use it and forget about trying these roms
Any ideas?
Got button to work some how
Now I am at IPL 1.01 and SPL 3.08
Hopefully I can redo everything and get 6.1 to work
It tells me my CID/SIM but no where does anyone tell me where I need to insert this ID code at.
ID code? What do you mean by that?
I ment CID, it was telling me the CID like if I needed to enter some sort of menu and run it
Running t-mobile rom again, hopefully this works
You sure that it wasnt asking for a SIM unlock code? OR was it giving you a "data crashes" message?
Nope neither of those.
Anyways
Tmobile screen pops up now with 2.26/2.26
In regards to installing new roms, do I just launch ROMUpdateUtility or Do I need to do a CID unlock again?
Also saw there is 3.08/3.08 available, Update before or after upgrading the wm6.1 rom?
Well, lemme ask you this, what is your device? Is it a G3 or a G4, if G3, then sure, update your IPL/SPL after you upgrade. If it is a G4 however, FOR THE LOVE OF TUNA DO NOT upgrade your IPL/SPL or you will have a brick on your hands. And also, if you have used HardSPL, then no, you do not have to CID unlock your device again. Personally, I just use the SoftSPL method each time I load a ROM. If your device is a G4, I have made a guide in the G4 section that should help you. Its got screenshots and such aswell.
G3
Yay somehow it worked this time, 6.1 is nice
I did softspl
3.08 worth it?
If you device is G3 - FORGET HARDSPL
You mention that you have IPL 1.xx and SPL 3.xx
get WST - Wizard Service Tool and follow the instructions to cid unlock you device, unfortunately you cannot unlock your SIM with the SPl that you have for now
After that flash a carrier ROm to align your IPL/SPL to 2.xx
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Ok, you have a G3 device
Get WST: http://forum.xda-developers.com/showthread.php?t=329170
Install in your PC (XP not Vista), check the situation about your CID and SIM
If you have CID unlock = SUpercid you can flash any ROm you want, if not you must downgrade to IPL/SPL 1.xx (Button Rom)
WST Unlock only works with IPL/SPL 1.xx
Note that SIM can only be unlocked with your SPL as 1.xx
go on run, type msconfig and open that, close all microsoft services and install,
Ckamc said:
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Click to expand...
Click to collapse
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
HAHAHAHA
S.V.I said:
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
Click to expand...
Click to collapse
You know when an oportunittie comes huh!
I can buy it too but its more glad to see a wizard function well with 6.1
hope you can unlock and upgrade... if not... READ a lot.
Losing Mind (again)
OK, here we go.
First off, I am in no way new to Flashing or the logistics behind it. I am sure this is just something that I cant find by searching. But my problem is this.
I have a G3 TMOBILE USA MDA (Wizard). I have used the lokiwiz2 unlock software several times and according to the program I am SUPERCID unlocked. I am able to flash ROMS all day long. I get no error about loading. What is happening is that I almost always end up with the same default ROM after the FLASH is completed. I am now sitting with the Button ROM on the unit. I assume if the Button ROM loads, then I should be CID Unlocked otr it would not load (or is this my mistake in thinking?)
As my MDA sits now, I have the Beer Mug Displayed, IPL 1.05
SPL 2.26 GSM 01.12.10 OS 1.5.4.2
Now, if I go and try to Flash to one of the Two ROMS I want to go to
TMOUS_MDA_5.2.1629_Wing_Port_1.1 (Boring ROM) or I try with SNN 3.1 it will run the procedure perfectly, and I will end up with a Barebones version of Windows Mobile 5.0. This is wild.
Has anyone seen this happen and is laughing and going "Been there, here is the problem,,) or do I need to discuss this in more detail.
Im wondering if the ROM Upgrade Software is grabbing a ROM from elsewhere on my Hard Drive and is installing it from cache or something like that. Is there another version of the OS Upgrader that allows me to tell it exactly what ROM I want installed, instead of just installing whatever it wants.
Thanks for the help, after two days of searching and looking around, I can deal with amteur hour emabreesment, just HELP!!
My xv6800 and my 8125 was a breeze compared to this nitemare. (BTW, I also flashed this 2 years ago with the TMOBILE USA Official Release, no issue)
wyreless
Well,these are symptoms of CID not unlocked.Button's Rom flashed doesn't mean its CID unlocked,its a patched IPL/SPL rom simply to downgrade to IPL/SPL 1.xx for CID unlocking.
Simply,download WST_4.2.2 and run it to verify the CID lock/unlock status of the phone and do the right thing onwards.
Thank You Zabardast for the quick and to the point answer.
I was thinking in the back of my head it was a CID issue. It was just that everything seemed to be "moving right along". I sthere an easier or better Unlocking soiftware then lokwhiz for the Wizard Series, specifically my USA Tmobile MDA?
Well,if you have Button's Rom running successfully,so its IPL/SPL must be 1.xx already,there shudn't be any problem to use lokiwiz02b to CID unlock the phone,you can even use WST_4.2.2 tool also to easily CID unlock the phone.
There's no other method known to get CID unlocked a wizard freely,unless you are ready to pay to IMEI company to get a unlock code
hey alll..ok i screwed up
i downloaded Charecters ROM..i used WST and it showed that my device is G3 and its CID locked..well i just started the Flashing and it stuck at 99%
now it wont load any ROM and just as i came from school..its not evening starting..its not evening charging..please help any one
for one to flash a rom you must CID unlock it first...
I flashed the ROM, but I didn't SuperCID it first. Its stuck in bootloader mode.
I'm tired of fooling with it. If anyone wants to buy it from me, PM me with your best offer. $3 shipping in the USA.
Can't you reload the original Cingular ROM? This is the only one that can be loaded as long as the "Cingluar CID" is present. RUU will also connect if the device is in the bootloader (3-color screen).
Once back in WM you need to Super-CID it - which is difficult after SPV-Developers is gone. But there is a local method available someplace, just don't remember the name.
Hi all,
I have tired to flash the new Rom yesterday and during checking the signature device reboot and installer said that it can not proceed.
After reboot phone goes directly into fastboot and gives ***Locked*** with Security Warning massage. I have tried different RUU but it is exactly the same.
Installation is failing on the checking signature.
I have tried Unrevoked3 but it is not able to find the device. Could you please let me know how to do it?
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-2822.10.0804_M
eMMC-boot
I was trying to upload RUU_Saga_S_HTC_Europe_2.10.401.9_Radio_20.4801.30. 0822U_3822.10.08.04_M_release_234765_signed
http://forum.xda-developers.com/search.php?searchid=23896455
Error nr 141?
LE: hope it works now, if not search the forum, the link reffers to the search results.
You will certainly get the answer there.
Link does not work:
Sorry - no matches. Please try some different terms.
I have tried to find an answer but no luck so far, I am quite new to this. Is there anyone who can point me in the right direction?
Another solution is to try the RUU 2.10.401.8
I had some problems with the same Ruu, but not with the signature, and the previous version worked flawlesly.
What's your CID?
Sent from my HTC Desire S
I have tried few others RUU and every single of them is falling during the installation.
ok I manage to unlock the device finally
But again it is falling during the installation of a new ROM. Do I have to revert back Hboot to 0.98 before installation? if so how to do it?
So the RUU that I recommended completed successfully?
What do you want to do next?
Now you are S-ON, if you want to install custom roms you have to unlock your bootloader with the htcdev method(you will lose your warranty and need to flag manually the boot file) or to downgrade.
Sent from my Samsung Galaxy Tab
I want to downgrade the phone to orginal ROM T-mobile uk. So I could take off the simlock, I have put the unlocking code yesterday but nothing happens. I was advised to downgrade the rom and should be ok.
Could some help me out with my problem please when ever I am trying to upload new rom it is stuck on signature verification.
I will quote Enigmaamit as he said it better than me:
enigmaamit said:
SIM unlock and bootloader unlock are two completely different things.
Click to expand...
Click to collapse
The only way to SIM-unlock your phone yourself is a XTC clip... better ask your phone operator.
I know the diffrance between those two, I have ordered unlocking code. After putting this into device when ever I put into new sim card it stoped nofifing me about it. But it is not able to find a new network. Below what I have receive form operator:
"It said "Successful" but nothing has happened
Darren
posted this on Apr 11 16:22
This has happened to a handful of customers who have all had one thing in common - the phones have been "rooted".
By rooting a handset the owner has removed some of the restrictions on the phone, which allows the owner to install whichever software of the phone that they wish. Unfortunately this has caused some issues when an unlock code has been entered.
It is easily rectified by reinstalling the original operating system that the phone was supplied with, then applying the unlock code and the phone should be unlocked, truly, successfully.
You can then reinstall the software you had on the phone before attempting the unlock and continue using the phone as you wish."
So that is the reason why I am trying to revert any changes.
i for one don't believe this
So their replay is bull**** in that case?
In my opinion yes(i can't say that i am a very experienced user) but i like to think i know some stuff about this.
I can't imagine what custom rom/Ruu version/app will "block" you to sim unlock your phone.
The only restrictions may be made by the phone manufacturer.
So i will try through HTC Clip in that case. But why I can upload any new RUU?
like i said earlier, i had some problems to with the 2.10.401.9 ruu.
Try the 2.10.401.8 it should work, if your phone is branded try a gold card.