Related
As i said on the title,suddenly i couldn't recharge my Universal anymore,yes i've tried with a brend new official battery as well but everything was in vain.As soon as i plug my charge to my Universal it appear a Red Led and after 3 min or so the led turn off and so the battery.
How can i fix this problem?!
Is there any chance?!
Is it really dead like that?!
Please HHHHHHHEEEEEEEEELLLLLLLPPPPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!
If the battery is really brand new, then I guess the connectors might be damaged or the internal power buses might be broken somewhere. Have you dropped your device recently? Or did anything that might explain broken connectors or internal buses?
Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN
tetsuokaneda said:
Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN
Click to expand...
Click to collapse
It can be a software error. Have you tried hard resetting or installing another ROM?
tnyynt said:
It can be a software error. Have you tried hard resetting or installing another ROM?
Click to expand...
Click to collapse
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!
tetsuokaneda said:
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!
Click to expand...
Click to collapse
Your battery is fine, unfortunately your device broke
Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...
mzalan said:
Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...
Click to expand...
Click to collapse
I wanna die!!!I'm completely Fu.. up!!!
What a terrible news!I can't believe it!!!!
If i'll bring my phone to the assistant i'm gonna pay alot of money,at least 200.00 euro!!!!
similar problem
i had the exact same thing happen to my EXEC when i got 2 new batteries for it. One was a standard sized, pretty much the same as the stock one that came with the phone and one was a much larger capacity one that needs an extra cover for the back.
Id been using the device for ages on this huge battery and the charge said 100% constantly. then the device turned itself off and it wouldnt come back on. upon connecting the charger the LED was red, so i thought the battery was dead. I left it on charge over night and when i tried again the next morning it was fine.
this happens everytime with this battery, it just needs a much longer charge than the standard one, and doesnt register properly on the default OS, i havent tried it on my recent upgrade to one of the midget roms.
so try leaving it on charge over night or for a very long time. if all else fails just get a new battery.
That might reset the battery back to life, but I wouldn't exactly count on that. A battery with a broken monitor circuitry is pretty hard to reset.
My last hope,i'm gonna leave charging my phone for a day and then see what happend....I'm desperate
Permanent red light...
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.
wtpelzer said:
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.
Click to expand...
Click to collapse
Could u post it please?!
Took a while but here it is...
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.
Same Problem, Led Indicator Always red
Hi,
We have the same situation, my jasjar just died in my hands, im reading a txt messages then al of the sudden it hangs, so what i did is reset it but it didnt power on, i removed the battery then after 10mins i put it back but then no power,then i charged it but it didnt power on too and the led indicator is always red, they say that if the indicator is red it means that there is no battery or the battery is missing but i check it thoroughly,the battery is perfectly place on the back of jasjer, i even tried to enter to bootloader but it cant. If anyone knows how can i revive my jasjar pls pls let us know....Thank you so much.
So sad till now there's no single solution.....
wtpelzer said:
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.
Click to expand...
Click to collapse
Exactly if my Jasjar is completely dead how can i connect via usb and then use mtty?!
I'm losing my hope to bring it back to live!
have same problem - can do nothing, still waiting
but there is one thing - led flashes once, when i put the charger into the device - but it does nor light, nor flashes - exactly nothing happens
If your device is dead...
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...
wtpelzer said:
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...
Click to expand...
Click to collapse
The point is that the device is dead and that is why the constant red light. I have a device that is stuck on the splash screen (no solution in sight) and another that fell down and broke. The one that fell down does not power on. If you put a charged battery ang plug in the charger nothing happens, no light comes on, but if you put a discharged battery the red light comes on. I have a third Uni that I accidentally flashed with a BA rom. It is behaving exactly like the broken uni, it does not turn on, does not go into bootloader and the red light comes on when I plug in the charger with a discharged battery in it.
For some things, there's just no cure...
Okay I understand where you're coming from but essentially what you need to do, under normal circumstances, is connect it to your PC, which if the device is working at all the PC will detect it but not connect... In the case of two of your Uni's I don't think this will help - the dropped one and the BA ROM failure. The one with the Red LED, which has stopped working could be a component failure on the board or it could be a Corrupt DOC table. Now to get back to how you'd go about fixing it if it is a corrupt DOC table, when you connect it to the PC and the PC detects it you disable ActiveSync and start MTTY it should give you the option of connecting to the USB port, when it does this if you get a prompt the problem should be fixable because MTTY can "talk" to the device... As for the other's try this method and if it doesn't work sell them for parts or canabalise the one for parts for the other...
Hello ppl,
since 2 days I've got a big problem with my Polas (at all XDA Orbit 2)
Ok first the bad story. My device did take a little shower and had water in it, which seems to be dried out now.
First, you all should think there is nothing to rescue here anymore.
BUT after the first problems (i will tell you some lines below), later on my device got working again. It worked for nearly a whole day.
And then the same problems as before came back again and now I'm stuck on it.
Here is the scenario:
- Without Power Plug: I turn on the device. It boots up as always. When boot is finished and coming to Windows Mobile, the device tells me "low power" and shuts off directly
- With Power Plug: I turn on the device. Showing the o2 Splash Screen. And that's it. Not even the ROM Version Numbers are showing up. When I take out the Plug after a while, XDA just turns off. Oh and the orange LED is lightened.
I can also plug it in while the XDA is off and it shows the orange LED, so you should think it's getting power.
But it doesn't when I try it afterwards without the Plug.
When I boot up without the plug, and plug it in after the Splash Screen, it's the same behaviour as on the scenario "Without Power Plug", it doesn't recognize that the plug is in or is not getting power I don't know.
So why was it working for one day? I don't get it!
You think that maybe only the battery is damaged? But why was it working?
I hope this text is not too confusing and maybe somebody is able to help.
I'm dying without my lovely device.
Oh and yes, i did try a hard reset.
I think the biggest problem for me is, that the device doesn't boot when the plug is in. That is totally weird from my perspective.
Thanks in advance!
gmc
Weird! I am able to flash the ROM. But still the same ;( What the hell?
While flashing the ROM there was no sign of a not working battery.
I'm confused!
Update: Re-Flashed O2 Rom and also tried udK Diamond. Flash is always successful but behaviour doesn't change or get fixed ;(( This can't be true.
Well one question... when the version numbers show up on the Splash Screen what is the "G"-Number? It looks a bit weird, "25.69.30.05H"
Maybe that part of the ROM is down?
gmc said:
- Without Power Plug: I turn on the device. It boots up as always. When boot is finished and coming to Windows Mobile, the device tells me "low power" and shuts off directly
Click to expand...
Click to collapse
I had this problem too, so did some other guys, Check out this thread:
http://forum.xda-developers.com/showthread.php?t=381442
Don't know how/if others managed to solve it but in my case only the replacement of my motherboard (under warranty) solved it.
satfly said:
I had this problem too, so did some other guys, Check out this thread:
http://forum.xda-developers.com/showthread.php?t=381442
Don't know how/if others managed to solve it but in my case only the replacement of my motherboard (under warranty) solved it.
Click to expand...
Click to collapse
Thanks for the link. Will check it out. As there is no more sign of water damage on my device, i hope i can use the warranty too.
After installing a new rom ,my polaris died ,no lights not recharging , I removed the battery,the SD and the sim card for > 24hrs and still the usb is not recognised and no lights at all and also not recharging any solution????
Hey.
Im reading u have a problem Polaris not booting up or worse not even working. Well i have the same problem and im also looking for a solution.
My device started to play tricks on me, like shutted down when not needed, freezing, and also when freezing i pressed reset button which did nothing but shut the device down completely (not even charging or booting up again). After many hours later it worked again but still had the same problem.
And well... now... now its totally dead, it stayed off for a day and not even charging nor booting.
Come on guys, some one must have had this problem before and maybe u can tell if its fixable or do i really have a f*cking brick on my table. , and also how can i avoid it if im getting myself another device?
I have the same problem with polaries...
shizny said:
Hey.
Im reading u have a problem Polaris not booting up or worse not even working. Well i have the same problem and im also looking for a solution.
My device started to play tricks on me, like shutted down when not needed, freezing, and also when freezing i pressed reset button which did nothing but shut the device down completely (not even charging or booting up again). After many hours later it worked again but still had the same problem.
And well... now... now its totally dead, it stayed off for a day and not even charging nor booting.
Come on guys, some one must have had this problem before and maybe u can tell if its fixable or do i really have a f*cking brick on my table. , and also how can i avoid it if im getting myself another device?
Click to expand...
Click to collapse
Please anybody help me.. Its pain for me. the phone is not opening. What I do now...
Check if your battery is not dead(voltmeter i guess), also what ROM/radio did you tried to install, also did installation completed successfully?
Don't want to make assumptions, but i think it's terminally dead(mobo fried?)
Thanks for your advice...
I checked my battery with voltmeter, it shows ok..
I installed the Salvy.C.83_Megan_v1.4_WWE_Polaris_EzInput_2.1 ROM and it was successfully installed, but after 1 day it is fully not opening, not responding...
What should I do......
Please help..
retsam88 said:
Check if your battery is not dead(voltmeter i guess), also what ROM/radio did you tried to install, also did installation completed successfully?
Don't want to make assumptions, but i think it's terminally dead(mobo fried?)
Click to expand...
Click to collapse
Thanks for your advice...
I checked my battery with voltmeter, it shows ok..
I installed the Salvy.C.83_Megan_v1.4_WWE_Polaris_EzInput_2.1 ROM and it was successfully installed, but after 1 day it is fully not opening, not responding...
What should I do......
Please help..
Could be the nand failing have a look using mtty to see if you have any bad sectors.
Disable usb connections in wmdc or active sync.
Put the phone into bootloader screen.
open mtty Connect mtty to you usb port.
Type info 8 to check for bad sectors.
meknb said:
Could be the nand failing have a look using mtty to see if you have any bad sectors.
Disable usb connections in wmdc or active sync.
Put the phone into bootloader screen.
open mtty Connect mtty to you usb port.
Type info 8 to check for bad sectors.
Click to expand...
Click to collapse
Thanks for advice..
But my polaries is not powering on
So what I do....???
I have the same issue, my polaris if connected to usb doesn't light orange, can't go in bootloader anymore and mtty seems to not been able to issue any command to the device.
As you know, is there a way to flash an hard spl via mtty? Or another way to flash it on my "seems bricked" device?
As for info, i was using the same rom as you, but mine was working great!
And now seems dead... my invincible polaris...
Please, anyone help us?
Thanks!
Sent from my Liquid using XDA App
Bump....
Anyone can help us?
Sent from my Liquid using XDA App
I have the same problem, my Cruise is dead.
Yesterday was OK, its functions run perfectly.....Today morning it's turned off
Orange light flash, after 20-30 seconds it turned off and Cruise became hot.
I don't know what's happen.....someone has any idea ?
Thanks in advance.
Hi,
Last night when I turn off the cellphone appears a screen with four colors (red green blue and white) ... not going into windows mobile ...I turn it off and turn switch on and press the reset and nothing!
And as I left the tricolor screen i got no battery, so when I put my mobile charging it always switched on and off the screen by himself becoming the tricolor screen.
Can someone help me?
Thanks
Hopefully you backed up everything. At that point, I would do a hard reset, which restores it back to the factory settings and deletes everything off of it. If you're comfortable doing that, you have to find the instructions to hard reset your handset.
Mine was Sprint's HTC Touch Pro 2, so for me, I held down the TALK, END, and POWER buttons until the screen came up and I just followed the instructions. If that doesn't work, let me know what brand you have and I can look up how to do it on yours. Good luck and let me know if this works for you.
Hard reset probably won't work in this case, although it certainly doesn't hurt to try.
Looping to bootloader (the tri-color screen), based on previous threads I've read, usually indicates there is something wrong with the ROM itself, which may require the stock ROM to be flashed.
Might also be a hardware failure.
redpoint73 said:
Hard reset probably won't work in this case, although it certainly doesn't hurt to try.
Looping to bootloader (the tri-color screen), based on previous threads I've read, usually indicates there is something wrong with the ROM itself, which may require the stock ROM to be flashed.
Might also be a hardware failure.
Click to expand...
Click to collapse
At this moment I cant do anything with the mobile because it has no battery to try to do something, because when I switch to load it turns the screen tricolor on and off right after!
And if I ordered another battery it takes longer than 30 days
I think the solution is to send for repair to HTC because he's still under warranty!
But thanks for help
Flash stock ROM and see if it flashes. Usually they flash. If it doesnt, then send it to repair.
Make sure you use the wall charger, and don't try to charge via USB. The USB cable won't charge the battery if its discharged too far.
If you charge from the wall charger overnight, it still won't power on?
Hey guys,
I've got a problem and since I'm not an expert I've got into a dead end.
I was trying to root my HTC One M8s. I managed to unlock the bootloader, but when I tried to flash a custom recovery (TWRP 2.7.0.2) it went completely black. Since then only reactions it has are the red LED is on, if I put it on charge the turned off charge screen comes on. And if I try to hold the power button and volume down, after 10 seconds it goes black again, even the red LED, like it tries to reboot, but it after that it only goes back to the charging screen if it's on charge or only the red LED if it isn't. I can't install factory image, because the computer won't recognize the device.
Do you, guys have any suggestion or is it completely bricked?
Any answer is appreciated!
hegtam said:
Hey guys,
I've got a problem and since I'm not an expert I've got into a dead end.
I was trying to root my HTC One M8s. I managed to unlock the bootloader, but when I tried to flash a custom recovery (TWRP 2.7.0.2) it went completely black. Since then only reactions it has are the red LED is on, if I put it on charge the turned off charge screen comes on. And if I try to hold the power button and volume down, after 10 seconds it goes black again, even the red LED, like it tries to reboot, but it after that it only goes back to the charging screen if it's on charge or only the red LED if it isn't. I can't install factory image, because the computer won't recognize the device.
Do you, guys have any suggestion or is it completely bricked?
Any answer is appreciated!
Click to expand...
Click to collapse
The m8 and m8s are different devices and it looks like you installed the wrong recovery did you install this one ?
http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
it does look like it's out of date
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8s-wont-boot-recovery-t3219219
As long as your pc recognises your phone you should be ok, try asking in this thread here
http://forum.xda-developers.com/htc-one-m8/help/htc-m8-blank-screen-logo-screen-wont-t3394286
the experts there will be able to help you
Good Luck
Sawdoctor
Fixed!!!
sawdoctor said:
The m8 and m8s are different devices and it looks like you installed the wrong recovery did you install this one ?
http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
it does look like it's out of date
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8s-wont-boot-recovery-t3219219
As long as your pc recognises your phone you should be ok, try asking in this thread here
http://forum.xda-developers.com/htc-one-m8/help/htc-m8-blank-screen-logo-screen-wont-t3394286
the experts there will be able to help you
Good Luck
Sawdoctor
Click to expand...
Click to collapse
The PC didn't even recognized it, like nothing would be plugged-in.
But eventually, I found the solution. I share it, maybe it's gonna be useful for someone in the future.
I had to take the whole phone apart, which was quite an experience, considering the built of the phone. But there are some guides out there.
https://www.youtube.com/watch?v=CJtVKlmEbcU
https://www.ifixit.com/Guide/HTC+One+M8+Battery+Replacement/41650
Detach the battery, wait a couple seconds and then reattach it again, push the power button and it was like nothing happened. Except the battery was on 5% what was odd because I was trying to charge the whole previous night!
Anyway, it is a happy end!
Thanks for the advice, though.
Cheers!
hegtam said:
The PC didn't even recognized it, like nothing would be plugged-in.
But eventually, I found the solution. I share it, maybe it's gonna be useful for someone in the future.
I had to take the whole phone apart, which was quite an experience, considering the built of the phone. But there are some guides out there.
https://www.youtube.com/watch?v=CJtVKlmEbcU
https://www.ifixit.com/Guide/HTC+One+M8+Battery+Replacement/41650
Detach the battery, wait a couple seconds and then reattach it again, push the power button and it was like nothing happened. Except the battery was on 5% what was odd because I was trying to charge the whole previous night!
Anyway, it is a happy end!
Thanks for the advice, though.
Cheers!
Click to expand...
Click to collapse
That's great news so glad you fixed it
Sawdoctor