Hi,
Please help
My QTEK S200 stuck at the bootloader screen, there where the red Dopod logo is and above the versions:
SPL: 2.15.0001
IPL: 2.15.0001
GSM: 02.19.21
OS: 1.0.13.21
I have no idea how I can fix my issue, since the USB dont connect(
TIA
Just install this German O2-ROM and your Prophet is back alife
http://www.o2-online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/update/xda-neo-update.exe
Mhh but I dont have a connection with USB,
do I know another trick?
please help
*sighs*
got it. *phew*
S200 without USB
to purp: Hello, can you tell me, how you repair your S200 without "live" USB connection ? I have same problem
Thank for your reply
purp said:
got it. *phew*
Click to expand...
Click to collapse
How did you fix it? Share the wealth! I have the same problem with same IPL and SPL
thanks!!
Hello,
i think you must connect your device with the USB cable on youre PC and bring it in the bootloader screen. Hold the Camera- and Connection Button and press Reset. After this on youre device will come an bootscreen in three colours and on the left bottom on screen stand USB. Now you can make an Update with the original ROM.
Hv the same problem...tried the above but can't boot it beyond bootscreen.think its DOC is damaged..
hdubli said:
Hv the same problem...tried the above but can't boot it beyond bootscreen.think its DOC is damaged..
Click to expand...
Click to collapse
I got the same problem, and i press comm manager button(left side below the camera button) and soft reset. and its enter the boot loader. give a try and pls told me the result if that would help you.
Related
help... i downloaded smart1's (normal, not clean) update, and launched UPGRADE_ROM.DAT from PC... it said initializing and everything... and then it reached to "copying something.dll' ... i waited 10 minutes or so then i got something like:
"error cant copy ....... because connection closed from remote... something like that."
i did NOT touch the imate during the process
and now when i turn on my imate i get the HTC with white background for a second but then it freezes on the blue "i-mate" screen... displaying:
IPL 2.13.0001
SPL 2.13.0001
GSM 02.20.21
OS 10.1.0.811
when i connect it to pc, windows does recognise and install my device but ActiveSync doesnt connect.
i tried removing the battery then putting it back in then pressing and holding the conn. button along with the power button and i DO get to the bootloader screen (with three colors) and then when i plug in the usb i get a small 'usb' word at the bottom of the screen, but still, ActiveSync doesnt connect... i tried installing the update again... but the program doesnt find my device
how can i make it work again ??? plz help me
thx in advance
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
johnnyduk said:
Now you need to find a rom that will install from bootloader mode and not an update........
I don't think you phone is dead
JD
Click to expand...
Click to collapse
i read in another topic what u said above... thx for ur reply...
btw, i'm currently downloading a 56 mb file called:
JAMin_WWE_2130923_21309112_020720_ship.zip
it can be downloaded from:
ftp://ftp.clubimate.com/JAMin_WWE_2130923_21309112_020720_ship.zip
or (better direct link)
http://www.clubimate.com/support/JAMMIN/ROM/JAMin_WWE_2130923_21309112_020720_ship.zip
i suppose this is the file i shoudl install right now using bootleader mode ? right ?
my previous rom version was 2.13.9.23 (same as name of file)
so is this the file i shud be downloading right now ?
thx a lot in advance
Just BEWARE that the rom you download is for your phone, it will be for a G3 or a G4, if you get it wrong, your phone is DEAD.
Please read the wiki and stickies....................................
JD
please. my phone doesnt move. it stuck on login screen.:
any way to restore it? i tried to hard reset, soft reset...nothing..
i tried to install smart 1 and after this happened
Problem solved
Same problem for me, but I solved today:
I connected the phone to pc in bootloader mode, the pc see the phone and says ppc usb sync, but the activesync not started.
I tried to install a qtek official rom by dangaard (you can find it here: http://www.megaupload.com/it/?d=4ELWL078 ) and I solded the problem !
Thanks god!!!!
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Twinsis said:
Please i have the same issue with my O2 XDA Neo - G4, i checked the official site but i don't understand german. Pls someone paste me a link to official Rom.
Click to expand...
Click to collapse
ftp://ftp.clubimate.com/JAMin_WWE_213923_2139123_022021_ship.zip
here is the official link for O2 xda or Imate Jamin
Same problem!
I had same problem but in my case with downgrade from WM6 to ASERG rom, i have downloaded RUU_Prophet_220734_2207114_024721_NVID.exe and that fixed my problem.
Hi everyone,
Help Please!!!!!
I have a Dopod 818pro that was unlocked and was working ok, but I wanted better performance, so I tried to upgrade the ROM to AKU3.3.13.ASERG-us. It looked like it worked oK, but after the recommended hard reset, I get the "HTC Innovation" screen and then it freezes on the black screen shows the below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
"Dopod Enjoy Mobility" and then it disconnects from the PC.
When I connect it to USB and do a hard reset the PC recognizes it when the HTC Innovation screen comes, but then disconnects from the PC. So essentially, I am not even able to connect to PC to reinstall my original ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe).
I would very much appreciate if any one can suggest a solution to reinstall my original ROM software...
Thanks in advance for advice...
Brenda
Hello,
Try pressing the camera button (hold on to it) and press RESET. You should be in bootloader mode now and the PC should be able to recognize the USB connection. If this works, try upgrading with the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe you mentioned. It should work.
Omg, i used too many "shoulds"... anyway it SHOULD work indeed
Oh..Thank You ....Thank You... it worked....
Hello Namco,
Thank You, Thank You.....I thought I fried the phone....your suggestion worked like a charm...
Thanks Again.
Brenda
Glad it worked
Hi every one, i've tried to install the last PDVIET rom, but upgrade was interrupted.
Now, my prophet not start, i've made a hard reset, but it stands on first stage when shows pda information.
My computer don't recognize it now, so i can't reinstall the rom!!!!!
Please help!!! what can i do !!!????
force it into bootloader mode
Thank you very much, It works!!
Madcap180 said:
force it into bootloader mode
Click to expand...
Click to collapse
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
lookum said:
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
Click to expand...
Click to collapse
While pressing the camera button,softreset your device and it will go into the bootloader..
i think i hv bricked my prophet after upgrading of pdaviet rom.
the phone stalled after upgrading of rom and went reset struck on os 4.0.0.0 screen.
kindly help.
the bootloader mode as described.. is it in red/green/blue screen with word usb on the bottom left?
nothing happens when connected to pc...
activesync still cannot identify the device....
pls help...i am a noob on this....
did you downgrade to WM5 before upgrade?
zeroed said:
did you downgrade to WM5 before upgrade?
Click to expand...
Click to collapse
??? downgrade then upgrade ext rom?
if tats the case, no i did not do tat.
did i brick my phone???
what can i do now?
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
zeroed said:
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
Click to expand...
Click to collapse
got it back.
thanks for the response.
i also read wiki, now on pdaviet .3
seem like .4 having batt drain issue....
In Trouble
hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.
I have Prophet G3, and upgraded it with IPL/SPL 3.08, all went ok, and gave a successful message, but it restarted and went black and refuse to start in anyway, when i press the power button, it flash with a very weak light on the screen (hardly seen) and the indicators flash also with a very light red light on the top and a very light green light on the bottom one,
please help if anyone knows what happened.
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
I do , But still not working
Thanks any way !
uhm ... if you dont found any issue ... send me a PM!
i have a working g4 doc and can replace your damage g3 doc.
chavdar said:
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
Click to expand...
Click to collapse
this should really work. i had exactly the same issue (with lights blinking). the part with hotwiring with the charger was essential in my case. that was the only way i could boot the device in order to reapply ipl and spl (if ipl is ok, device should be able to start into boot mode, so no hotwiring necessary anymore)
I'm trying with everything and all what I have but it's still flashing
Hi
I connected directly by my charge cable (cutting charger cable ) and it's work but the problem is I can't downgrade SPL 3.08
Can some one help me to downgrade from SPL:3.08 to SPL:2.20
info.: now my IPL is 2.20 and my SPL is 3.08
My Prophet is G3 JamIN
My best regards,
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS
melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547
aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~
help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?
have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)