Database Info

Rom upgrade problems, HELP Please.

I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

8310 dosn't start after radio rom update

Hello,
I updated my 8310 with the latest radio software.before I had the original Rom, which was installed since delivery of the 8310).
After change of the vendor id the update of the radio software was succesfull, but the 8310 dosn't start. The only one what happens is comming of the qtek start screen, then the 8310 switched off itself. I made several times a hard reset and I dissmounted the SD card, no success.
It is possible to update the complete ROM without a running 8310, only with the Mini-USB is pluged in??
Thanks for your comment.
Regards
Andreas

My Prophet is dead!!! What can i do? PLZ Help!!!

Hi. Congratulations for your good work!!!
Last week i bought an O2 XDA Neo (used) from Germany. Everything was working ok. The only problem was with the language (German) so i wanted to change the language to English and after that if it was possible to Greek. I thought that the only way to do that was to change its firmware. My phone had the official firmware WM5. I downloaded and installed ActiveSync on computer. Then i synchonised the PC with the phone succesfully. And at last i runned a rom that downloaded from wiki from the prophet forum. It installed succefully but after a restart the phone stucked on a three colour screen. I reinstalled the same rom and another rom but the problem is the same. Nothing works. The phone is dead?
What did wrong? Is it possible to repair this problem? Plz if enyone knows something, i would appreciate it if he replies to this thread.

the good thing is..
your prophet is NOT dead..
simply flash it again..
tri-colour screen is a bootloader mode and in that state you still can flash your neo with RUU ROMs
a prophet is called DEAD ,only if it cannot enter bootloader state
flash it with ORIGINAL ROM..and that should works..
read the instructions before going to WM6 as it needs some steps before simply flashing it

check this link :
http://forum.xda-developers.com/showthread.php?t=389558

Hi m friends. After hard work i finally made my phone works again. I instaled the oficial rom for prophet (O2 Germany) that founded in another thread. Then it worked fine. Then i hadrspled my devive and finally i installed a WM6 rom caslled evolution.... and it worked fine. But does enyone knows if it is possible to have greek language and greek keypad on my prophet? Thank you for your help in advance.

There is a greek ROM here: http://forum.xda-developers.com/showthread.php?t=323868
It uses the old upgrading method, so you will need to flash the "Part One" ROM first, then don't do anything to the device and then flash the "Part 2".

WM5 for c600/tornado

Where I can find original rom wm5 for spv c600 from orange PL.

Orange UK ROM
Orange UK version is here.
.. can't help you with any other versions, sorry

I tried this. It's only upgrade. I need original rom. I tried to install wm6 and I don't unlock superCID. My original rom was delated and now i can't install other.
On other forum i found that I need original rom from Orange PL. If i want to install wm6 or 6.1 RUU shows error :invalid vender id. On my smartphone only shows starup animation and bootloader. What I have to do?
Help!
Sorry for my english. I'm polish

I have orginal Orange PL ROM on microSD card. If You want I can try to make an image.Backup ROM working-I've tried.

If you do image of rom it will be in *.bin. I can't install rom in this format.
Do you have a normal/standart installation of this rom??
Or whether you would help to me in the installation of rom in *.bin format.
Sorry for my English

I've made ROM backup before flashing new soft, so I can make an image of my card-->then You'll put this image on to Your card & that's it.After that insert card into the phone.Push camera button and put data cable into the USB slot.Phone automaticly start flashing from backup ROM fro SD card.
I've tried and it's 100% working.
Don't appologise for "english". I'm from Poland too

In my spv c600 it's don't work. Would you write to me on gg (10131443) and help me?

you can cid unlock your phone now... not ?

No because on my spv start only bootloader. I don't know what I have to do.
HELP!!

same problem here. It only start in bootloader. I can't do anything now.