Database Info

Cannot sync my hima after uprading to WM 2005

I just upgrade with the last AKU3.50 with HimaUpgradeUt_noID.exe and now i cannont synch but i can install aps...
By the way i use DOC tools to upgrade the storage to 30 Mb
If anyone have an idea, let me know
Thx

Whats your activesync version?

I'm on 4.5 beta
an di got the error => Support code 80070057
I try :
- changing my ROM => nothing
- changing my Radio => nothing
So actually i'm under AKU 3.50a.32 WWE with Radio 1.19 and 30 Mb of storage (using DOC tool).
Could I have done something wih the Disc On Chip ?
NB : I use Office 2007, it work before with my old 2003 ROM.
After, I upgrade so i force with HimaUpgradeUt_noID.exe and the progs wont install temselves...
So i change the ROM again, the Radio...progs install works but the synch can't be achieved
Don't hesitate to curse me for 3 generations

I think the problem isnt on your device buth rather on you computer..
Why dont you try to make another user on your computer then try to sync it there..
Lets see what will happen

back in 5 minutes with the answer...

It isn't my PC, it's my device...
So is there a hard hard reset ? or do i try to be back to an old 2003SE or anyone could me what I do wrong with my Hima .

do you have an application that actually closes programs? if yes, try to set activesync.exe as an exception.

I got a task manager but i dont see what you want to do
Trying to tell my firewall or toher that active sync is good for me ?
=> It's the case because it was working fine before
Trying to close the prog on my device ?
=> Haven't a activsync.exe just en repllog.exe with the activ sync icone.
Well well well, i'm so fu**** confused

Back to old 2003SE and it works... Geez !

tried looking up the error code?
http://www.google.dk/search?hl=da&q...7&btnG=Google-søgning&meta=lr=lang_da|lang_en

I have the very same problem, since i've cook a new rom aku 3.2 w/ 24Mb of pagepool. I've noticed that i can't delete or modify any file in the root folder, but using resco explorer. So i guess that my root folder for a reason i don't know, is write protected. My hima didn't sync with outlook, using any versior of ActiveSync at home and work (before the new rom, it works pretty fine), but it gets connected so i can use internet... So any of you guys can tell me how to solve my problem?
It would be very appreciated

I have the same problem,so i did backup my Data directly on the Himalaya Device und copied it over the WM5 Storage tool,its a small run in a Circle but
its functional ,You can Install Apps too,because you can choose now (thanks to WM2k5)where the
Apps are going to copied..

I do the same thing, but i really need to sync with mi outlook at home and work, so that back up don't solve the problem.

The problem is 100% in your PC. I discovered this when I notice that my laptop sync ok but want sync with my desktop. I done everything under the sun to make sure my disktop mirro image of the lapttop but nothing works.
Then at last I discovered that it works when I UNchecked the settings on the device (USB to PC) to disable the advance network functionality.
I suggest you delet active sync first and re-install it then reboot..
Good luck.

forget to mention both laptop and desktop XP, and device is XDA2 with AKU3.5

I think better use the fix version 4.2 not beta 4.5. It could be there is some bugs in the software.

Is this just an email sync issue, rather than just comms?
Do you use Exchange server?
Try this:
On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”

Problems accessing logMeIn via pocket pc

Hi I am having a problem accessing my pc from my pocket pc XDA 2i. I can access fine from a "normal" pc with no problems. From the XDA I can log in, then pick the remote pc from the my computers list, then enter my password and username, but the next page which would normally be the desk top, is a page showing the logmein free logo the name of the remote pc, a copyright notice, and an option to end the remote session. I cannot get any further than that !............hope you can help...........Thank you.
P.S. I am running NetFront 3.3 browser

600bhp said:
P.S. I am running NetFront 3.3 browser
Click to expand...
Click to collapse
Try it from Pocket Internet Explorer.

Hi, I have tried it with Internet Explorer, and I get the same result

I have e-mailed LogMeIn support 7 days ago but still no answer

I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.

jc240 said:
I've tried as well on my treo 750 and am having the same problem. I thought I read somewhere that the current version of logmein is not compatible with WM5. It works great between my computer at work and home though.
Click to expand...
Click to collapse
It's comptible with WM5 as is also pointed out in the Remote Desktop Access Bible ( http://forum.xda-developers.com/showthread.php?t=288506 ).

I've tried everything and cannot seem to get logmein to work. I log in to the website and then enter the login and password for my desktop computer and all I get is a screen showing the version of window I am using along with some memory usage bars. I can restart or my computer remotely, but that is all I seem to be allowed to do. As I mentioned before I don't have any problems accessing my computer from other desktop computers. One thing I have found is Z2 remote access. It's a bit slow, but works pretty well. The only thing is that it is not free, but it is only a one time fee for the software.

I'm thinking that this might me a browser issue. At least for me. If I use minimo I can at least get to the page that says remote control and end remote session. However when i click on it ends up going to a blank screen with nothing there. Can anyone who has this working tell me what their registry setting are for PIE, as far as showing it to be a PPC app rather than IE5. I think that I've modified it a few time and don't know what the default settings ar.

Hi There is no line saying "Remote Control" unfortunatley

Hi I tried modifying the settings, now its gone very strange, when I select my computer I know get connected to Remotely Anywhere, then a page showing text saying Windows XP, cpu load (No percent shown), Memory load ( no persent shown), Main menu, Reboot, end remote session. But I dont have a remotely anywhere account....very weird

Hey 600bhp. You might want to check on the logmein.com forums. There are two threads. One is titled " Problems accessing via pocket pc" and the other is " Why is Pocket PC no longer supported?" It would seem that logmein does not support ppc's for some reason if you downloaded it after 02/20. logmein is aware of the problem and apparently working on it.

LogMeIn Cab File for Pocket PC
I have been having a lot of the same issues. I have a PRO account so I called technical support. They sent me the following file. I've been connecting like a champ ever since. I use the bleeding edge beta version on my PC. This file also works with the regular version.

mikechannon said:
Yep that's the cab mine downloaded yesterday - unless it's been modified?
Anyway if it's the same then I agree works perfectly.
Mike
Click to expand...
Click to collapse
I don't know if it is the same or not. It might be. I just know it works

Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??

logmein access issue
I'm using my HTC p3600 and trying to download the remote access client sw no chance to obtain it, dwl stopped.
can I download your "ractrice.cab" file and install it directly into mobile device?
I'm experiencing a problem doing it ( unsuccesful installation ) ...
please help me
Thanks

why doesnt this work?
ecsk2 said:
Are you TREO 750 owners still having issues? I'd like to know as I was
thinking of trying the 750 but need LMI for sure!
I know one this for sure the OPERA browser on PPC (WM5) will just go in loops, so LMI is the only thing I use IE for on my WM5 device(s).
Having have said that if the IE is somehow custom on the Treo 750? Could that be it??
Click to expand...
Click to collapse
I have a Treo 750 with the official ATT WM6 rom. I cant get logme in to work either. Here's what happens.
1) I visit http://logmein.com via pocket IE
2) I get redirected to http://secure.logmein.com/pda
3) I log in with my email address and password
4) I'm presented with "My Computers" and I click on a hyper link of one.
5) I'm asked to download RACtrlCE.cab
6) I save and install to main memory
7) I click the continue link on IE
8) I'm asked to log in again
9) I'm presented with "My Computers" again
10) I pick one, I'm asked to log in again!!!
11) I see "My Computers" again (endless loop)
What's wrong??
Gotomypc worked great when I used to have a free account through my work. Why doesnt logmein work on my pda?

update
I uninsatlled the RACtrlCE.cab via remove programs
I installed the ractrlce.cab from page two of this thread
I tested logmein.com on my treo. When it asked to download and insatll RACtrlCE.cab I clicked cancel to force it to use the other package. (no luck) Ok so I let it upgrade. It uninstalled ractrlce and installed the one directly from logmein once again.
It seems I can get further now for some reason but I'm still not connecting. Here's what I see now. I get redirected to the following url and the page has the following info:
http://asterisk.app53.logmein.com
_________________
Windows Authentication
User name:
Password:
__________________
ok so I log in with my WINDOWS username (not logmein email) and it goes to the next page............
__________________
Windows IVsta Ultimate 6.0 Service Pack 1, v668
CPU Load %
Memory Load %
Main menu
Reboot
End Remote Session
_________________
The bottom three items are hyperlinks. Clicking on Main menu brings up the same screen. WTF is this junk? This doesnt make much sense something is not right obviously still. Anyone else see this? Suggestions?

has anyone got this working for wm5 in the last week or so, i lost access following phone crash and now keep getting prompted that in need a 2003 compatable phone and loop through the cab download constantly

proxy
I had a similar problem with my 8525 (official ATT rom WM6) and running Disable the proxy everytime before i use Logmein works.
Hope this helps

2577 won't autorun

Hi all, new here. Be gentle...
I've seen this problem alluded to elsewhere but I'm still confused.
I'm trying to install tomtom6 on an IPAQ3850.
Pocket PC 3
ARM SA1110 processor.
I have an SD card with the tomtom software, with 2577 folder which
holds autorun.exe, autorun.exe-run, ttn2003.cab and ttn.cab files.
When I insert the SD card I believe it should execute the autorun file
but nothing happens.
I have read this ( http://tinyurl.com/ywayr8 ) but am still a little confused about the 2577 folder feature.
I have tried manually executing the ttn2003 cab file, which extracts, seems to
install but fails when I try to run via the tomtom icon.
I believe 2577/autorun feature can be disabled in the registry. If so, how do I check if mine is disabled?
I know my way round a PC's registry but I don't know how to access a pda's registry.
Should I be able to manually execute the autorun.exe in the 2577 folder and expect it to install in a similar way as executing setup.exe on a CD / DVD if no autorun activated?

Yes, I think it can be disabled in the registry, although I don't know which key. About how to access it, there are many registry editors, and they work exactly like the Windows version so you won't have a problem with that. Among other apps you can use for that:
- PHM Regedit
- Resco Explorer
- SkTools
- etc
About Tomtom: do you have a start.exe file in the root of the SD card? I believe that's necessary.
Last but not least: yes you can execute autorun.exe manually
Cheers!

Hi,
The Ipaq 3850 comes with Windows for PocketPC 2002 and TomTom6 requires Windows for PocketPC 2003-there is an upgrade available on eBay for just £2-3.There are different vesionds for the 3850 and 3870 so make sure to buy the right one.I applied this WM2003 to my 3850 and also my 3870 and installed TomTom6 and it works well..
Ashley

Ineluki, thanks for your reply. After reading AshleySear's reply I was looking in the settings to see what version I had and noticed the autorun feature. It was disabled...
Strange, I thought it would have been enabled after I did a cold reset to set it back to factory default.

AshleySear, I think you may be on to something. In 'settings/about' it shows pocket pc version 3. In my ignorance I thought that *was* 2003. I'd be interested to hear what your ipaq has in 'settings/about'.

My Ipaq 3850 with WM2003:TomTom Nav6 is OK
Bios 3.00
OS:Microsoft PocketPC 4.20.1081 build13100
Prior to upgrade WM2002:TomTom Nav6 would not istall
Bios 1.2
OS:Microsoft PocketPC ?
Hope this helps.
If you do upgrade to WM2003 you lose everything and need to create a new partnership.
Currently I use a kaiser-so bith the 3850 and 3870 are in a box
Let me know how you get on.
Ashley
[email protected]
Essex (UK)

Hi Ashley,
As you suggested; bought an upgrade on EBAY for £1.75 to Pocket PC 2003. Exactly the same OS build as you. Tomtom6 loaded straight away, maps recognised OK.
Please accept a virtual pint from me in appreciation.
Incidentally, where do you see which BIOS you are using?

Hi,
As you cold start/hard reset the iPaq the red/white screen,booton right corner it says something like BIOS 3.00
FYI
1.10,1.15,1.20=Ipaq 3800 without bluetooth & Windows for PocketPC2002
2.10,2.15,2.20=Ipaq 3800 with bluetooth & Windows for PocketPC2002
3.00=Ipaq 3800 without bluetooth & Windows for PocketPC2003
4.00=Ipaq 3800 with bluetooth & Windows for PocketPC2003
Glad to be of help.
ashley

Synchronize WM6.1 device with Lotus Notes

How to synchronize WM6.1 device with Lotus notes?
I tried Laplink PDAsync 4.1.1033 and XTNDConnect PC 6.5.9033 but I always get message:
Synchronization Failed: 17.11.2008 22:05:41
Error 1004: Unable to connect to device. Verify that ActiveSync is running.
Both programs worked with WM6.0.
Any solution?

I am using the IBM Lotus EasySync Pro which is working finw with my HTC Touch and WM 6.1 . I have tried a few different firmware versions w/o problems. Dow this is not a freeware application.

well I use Laplink with a 6.1 flashed i780, so thats not the problem.
do you have the laplink cab installed on the device?
can you access the device by means of active sync?

@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?

"unable to connect to device"
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...

Do you have "Enable advanced network functionality" turned off? You can found this at settings\connections\USB to PC

I have turned off faster data synchronization and nothing again ...

jreber2 said:
@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?
Click to expand...
Click to collapse
PDA Sync 4 and Notes 6.5
it even works nicely with my new Xperia.
have you installed the CAB file on the device? the Sync Software.WM5.CAB?
you can find it in the laplink installation directory and you need this to sync.

There is no more problems with XTNDConnect v7.0. Thanks for your help anyway.

\\windows\101\xcpcsyncsvr.exe : error 2
I tried XTNDConnect V7.0, however when I first run it and it attempts to instal to the device (must be the device and not storage card) it chucks up the error "\\windows\101\xcpcsyncsvr.exe : error 2" that it can't see the .exe. I have checked in the win 101 folder and the file is there; there is also a file XcpcApiMgr.dll.
I checked on the Sybase WS http://www.sybase.com/detail?id=1054315 and point 6. advises that
"This issue is being reported with certain models of HTC-built Windows Mobile 5.0/6.0 Smartphones. It is caused by a certain type of security these devices have, which prevents the XTNDConnect PC CAB file from being installed properly on the device."
and instructs to download a security manager.zip from their FTP (this is a broken link and I have had no reply from them as yet).
and if this does not work to
"If you are still unable to install the XCPC CAB file onto your Windows Mobile 5.0/6.0 Smartphone it may be necessary to follow the manual unlock instructions from the link below."
I also checked in the reg as they advise but the security setting "tier 1" on the device is already as they specify.
Can any one help me please?
Cheers, Tom (1st post) Notes 7.0, Touch HD ROM 1.14.405.3 (22273) WWE

I'm using mNotes from Commontime. Tried a few other apps but like mNotes the best. Does over the air sync and never have to worry about connecting my phone. A little pricey at regular price, but not bad when it goes on sale.

WM6.1 and PDAsync 4 - missing CAB
I have Laplink's pdasync 4 trial installed, but don't seem to have the CAB file on my htc diamond. Any advise how to get it is much appreciated!

Common Time mNotes
prapsik said:
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...
Click to expand...
Click to collapse
Had the same problem with my Touch HD (worked occassionally, getting worse over time - EasySync 4.6, Notes 7).
I switched to CommonTime mNotes Desktop - works perfect (not free and if there is anything to mourn, it's that they only offer subscriptions - that means annual fees...).

EasySync Pro 4.2.6 Install Solved!
I've had various issues reinstalling DeLorme and EasySync on my WM 6.1 Fuze, but this time, after the June ROM Official upgrade, it fails continuously with the \Windows\211\XCPCSyncSvr.exe Fails, Err 2. I performed a hard reset, started ActiveSync (From XP Pro SP3) but did NOT configure it, only set it up as Guest file access. Launched the EasySync exe, and when the program sync message came up, clicked on both DeLorme and EasySync Pro. Loaded up like a champ on the Fuze this time. Now I'm going back and setting up ActiveSync and EasySync configurations.
Whew!

Hi !
I just got an HTC Touch HD and I have the same problem with XTND Connect...
It worked with my old Touch Cruise. Well it almost worked because Notes is really a piece of s**t ! It worked on single way sync (from pda to pc). In dual way sync I had troubles, Notes having difficulties to treat the periodical items from the pda...
With the HD it works first time, and after you get an error popup at startup and while trying to synchronize... And then no way to reinstall correctly XTND on the pda...
Anyone has the solution, I'm interested !
I can't use any other software on my pc cause it's my profesionnal one and it's locked up from everywhere...!

ifonz incompatible with omnia i910 smart reader

I'm using ifonz on omnia i910 but now smart reader stopped working. Any help would be appreciated. I searched the forum and didn't find anything related. Thanks.

what version of s2u2 did you install and did you install it at the same time as ifonz

I didn't install s2u2 unless it was part of iFonz. Any other thoughts? Thanks.

it was a well documented fault with the 1.3x versions on s2u2 that smar reader wouldnt install untill you installed 1.4x
now what version i fonz have you installed. have you tried uninstalling ifonz then trying smartreadr

jayjay8585 said:
it was a well documented fault with the 1.3x versions on s2u2 that smar reader wouldnt install untill you installed 1.4x
now what version i fonz have you installed. have you tried uninstalling ifonz then trying smartreadr
Click to expand...
Click to collapse
Maybe this is my lack of understanding but ifonz doesn't appear in my "remove programs." Do I need to just delete the folder that I saved to my storage card? The folder contains the iFonz.exe file among others. Version is 1.1.2-QVGA.
Thanks for your help.

i wouls suggest moving to ifonz 1.0.4
although its a step backwards there not a lot of deiiference
you will need to delete that folder first the install 1.0.4 cab
let me know how it goes im online from 9 til 12 gmt most days

Thanks. I deleted ifonz completely and smart reader still won't work. I've searched and don't even find an application file for smart reader on my device. Just a .lnk file associated with the start menu and of course it won't start because the application file appears to be missing. I don't see how I could have deleted it, but I'm wondering. Maybe I'm just missing it.
By the way, if I can get smart reader working again, I do plan to return to ifonz and will try the version you suggested. I see there is even a newer beta version of ifonz just released but maybe I should stay with 1.0.4? Also, I only find zip versions of the ifonz program. The author says he has removed cab files. Ifonz 1.1.2 was working great and I definitely like the interface. Only problem I'm aware of is the smart reader.
Again, I haven't even installed s2u2 but I'd like to use both s2u2 and ifonz on my device. Just maybe not at the expense of smart reader.
Thanks very much for your help.

well 1.0.4 is a cab 1.1.2 is not
have you installed any else recently that might have triggered the malfunction gimme a list of your apps that you install omitting the rom applications
my smart reader wasnt included in as an exe but still worked

I did some more searching and found the smart reader is actually DioOcr.exe. Also found this information on modaco:
Smart Reader - WinMo @ MoDaCo
unpack this archive and copy dll files to /windows on i900 pda and copy files dio ocr.exe to your memory on storage memory and start it.. in my omnia smart ...
www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/271378/smart-reader/ -
Click to expand...
Click to collapse
I downloaded the cab file from Samsung site, installed it on my device and tried smart reader again. Still no luck although this time it acted like it wanted to start but never did. First got rotating wait icon which I hadn't even been getting before.
I've installed several other apps but don't think anything interfered with Smart Reader before ifonz. I'll put together a list of other apps I've added.
Thanks.

I've added microsoft livesearch recently and can't say I tried the smart reader after that (but before ifonz), so I don't know if that was a problem or not. Doesn't seem like it should be. I'm removing it to see. Another possibility is scid pocket chess which also includes tcl evolane as part of the chess program. Maybe I'll try to remove them and see if smart reader works again. I think everything else I've added was before the smart reader problem arose. I hate to try a hard reset but do want to get smart reader back.

I deleted ifonz and am about ready to resort to a hard reset and see if that fixes the problem. I appreciate what has been explained about the issues between s2u2 and smart reader. Although I had not installed s2u2 I found some registry entries for it and wonder how that happened. I don't know enough to fool with the registry although I'm willing to try to remove or modify the s2u2 registry entries if that might fix the problem with smart reader. If not, maybe I'll do a hard reset and see if I can get Smart Reader back.
The dio ocr file I referred to in another message was actually for omnia 900 instead of my 910. I hope I didn't screw anything up installing it on my device. I have removed it and now Smart Reader doesn't even show up as an available program. Before it showed up but wouldn't start.
Thanks.

well i n the case of a buggred reg id heard reset coz if you edit it not knowing about it
by the way if you save pim.vol from /mydevice and put it in my storage you can back up contacts but youll need totalcommander to put it back in there as its read only
once you heard reset install ifonz 1.0.4 and then the latest version of s2u2 (1.46???)

my contacts sync with microsoft outlook at work so i guess it's not a problem for contacts. I will want to save photos and some other things so i will copy those elsewhere, maybe just on the storage card. I do use total commander as you mentioned. Thanks again for your help in trying to fix this problem. I'll let you know what happens when I do the hard reset. May not get to that right away.
By the way, are there registry repair programs for windows mobile? I feel fairly competent with some computer dabbling but the registry is over my head. I really don't understand how the s2u2 entries got in the registry when I didn't install it. I wonder if it might have been included in the ifonz program without my knowing it.

well all i know is the reg is a fragile thing so unless you knw what to edit and why youre doing it id leave it well alone

I hard reset and that got Smart Reader back. Then I started reinstalling add-on programs I like. I decided to try Smart Reader after installing each program in sequence to see what may have conflicted with it. Dotfred (see dotfred.net) has a task manager and expanded start menu that I like. This seems strange, but when I installed that expanded start menu, Smart Reader quit working again. As soon as I remove the expanded start menu, Smart Reader works perfectly. Seems like a strange thing to be incompatible but that seems to be the culprit. The Dotfred task manager was not a problem, just the start menu. I've e-mailed Dotfred to see if the developer has any ideas. I'll post again if I learn more. Thanks for your help once again.

I had problems with my Smart Reader too, I remove s2u2 and i try to start Smart Reader but It didn't start again! Then I delete ESET Mobile Antivirus from my Divice and that got Smart Reader back.
So if you have installed ESET Mobile or others Antivirus in your device , remove it and try to run Smart Reader!!!!!

smat reader not working omni i910
icon not working also iomnia910.dont know whch app conflicting.anbody know of anyway to debug without hard reset?got eset antivius noticed comment i will try deinstall

S2U2 volume controll off for run Smart reader
I also have notice that S2U2 with volume control broke the smart reader (don't start), so I have put off this option in S2US menu and now Smart reader run weel!!!
Mrtax

To re-start Smart Reader again
Another way to get around it is to start iLock2.exe which then will close both iLock and S2U2. Doing so shall be able to start Smart Reader again.
Be aware that you need to do this everytime before using Smart Reader. Good luck!
Rich Lim