Database Info

weird text message. helppp

i just bought my tilt, just flashed to dutty v3 room and now i get a weird text every 4 mins. the number is 111145643 and it says wvi1 1.1 1111. is there anyway i can stop that text?
thanks!

Hmm I think you should call your carrier. Unless your phone is somehow sending itself a message, the kaiser probably isn't the culprit.

did you have express mail setup? if so you have to reinstall it on the phone then log onto the express mail server and delete the connection that you made for push e-mail or turn off push, then uninstall express mail on the phone and reset. you should be OK

^^I stand corrected!

I think that is for the IM+ program that ATT provides on their roms for im. The company is called wireless village i believe. I was bugged by it for a while, well the full hour I had my device before I flashed schaps!
I use Palringo until trillian gets a clue about wireless devices. It can sync with AIM, Yahoo, MSN, Gtalk, and others.
BTW, It uses data instead of sms to send messages like the IM+ does.

i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.

gimini said:
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
Click to expand...
Click to collapse
its not necessarily a side affect of flashing, it can go away if you reinstall the app that was on the old rom that is causing it... its something that was installed on your previous rom that used silent sms to alert the program to perform a specific function. LIke PTT, expressmail, or the cing/att IM client (to tired to remember the name)... When these programs are running your phone will recieve a ghost message that is only read by the app to wake it up. Alot of these problems were seen in the hermes thread and PTT.

Nope....That is what you get when someone tries to PTT you. Without PTT you get an SMS message. The way PTT works is basically Voice MMS messaging with a trigger to open & close the voice connection (PTT Button) Those digits you see are altered SMS addresses, they are altered so that PTT can recognize them & shift it from SMS to PTT.
Agin, whenever you kill PTT, you lose the ability to decipher the modified address & hence, it's received as a MMS instead. The reason you keep getting it is because the request that was sent retries a certain number of times before failing.

why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE

Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Well, that would make Dutty's never ending post even longer. We should save that post for other problems directly regarding the rom, and comments on new updates.
Beside, I believe the problem has nothing to do with Dutty's V3, it work flawlessly for me.

I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Wow man take a breath! Your gonna get an ulcer.

to his defense i havn't seen this question in dutty's thread at all. and i've only seen it once but not onthe kairser forums. so cut him a lil slack. plus we all learn something from it...ptt or express mail can cause this. thats sure something i didnt know. hope all is well now...enjoy your device sir.

This question was answered on the hermes forum. That is how I solved my issue. I still believe it deals with the IM app from att that uses wireless village. Ill try to find some links to help get it solved.

I couldnt find the thread in the hermes section that described the issue. It might be from OZ messanger and not IM+. It is the version that comes preinstalled from the ATT rom. It is designed to use sms to im therefore making ATT more money.
I had the same text messages when I first got the Kaiser and ran the im software. I believe my test message had a different set of numbers at the end.
Here is a link to Wireless Village. They are a group that is promoting interoperability between handsets for a variety of functions (IM included).
http://www.openmobilealliance.org/tech/affiliates/wv/wvindex.html
EDIT:
I found this article from the cingular...er...ATT forums. This is the issue I originally had and the same text from the same number. The issue below is because OZ messenger was closed and not properly exited.
http://forums.cingular.com/cng/board/message?board.id=samsung&message.id=16362
I spent all day yesterday figuring this out. I downloaded and install the .cab file to my storage card and then logged into the IM program (OZ). After signing out, it kept me logged into all 3 services (Yahoo, AIM, and MSN) and then I proceeded to receive 40+ text (SMS) messages b/c it was trying to "reach me". After sitting on the phone for about an hour and half with a great Data Service Tech Rep, we figured it out and now the IM program works just fine.
~
I'm getting the message from 1111470400 and all it says is WVCI 1.1 333.
~
LISTEN IT KEEPS TEXTING ME AND IT WONT STOP.
HERE IS THE NUMBER ITS FROM AND WHAT IT SAYS
1111470600
WVCI 1.1 333
Click to expand...
Click to collapse
From the 8525 forum
http://forums.cingular.com/cng/board/message?board.id=samsung&thread.id=33273&view=by_date_ascending&page=1

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
You know - Generally I don't get into these types of little spit / spat arguments - but today you have caught me at the perfect time.
Martinhdk - you are the type of person that makes dealing with the public so hard. You complain about things that aren't even worth complaining about. Sure - it was Dutty's ROM, but in essence had absolutely nothing to do with the ROM, it's probably the push to talk causing the issue. (Because I have the same issue) You had to try and prove yourself by spouting off and telling someone how to run things, when really, you were in the wrong.
Sometimes people get anxious and maybe don't do as much searching as they possibly should. Big DEAL - you are in a forum and since forums began it has been a problem. Does this require that you lay into the guy and tell him how stupid his question is? NO, it doesn't. You must be one very unhappy individual who probably lives a very lonely life - do us all a favor, in the future; keep your comments to yourself and let the moderators do their job.
I apologize to XDA - I know this thread / forum is not used for this. I just feel that sometimes these guys who insult someone younger / or maybe just not as experienced have a tendency to scare these guys away and I don't feel that is right.

i had the same exprience , its not the problem with your carrier , its the ATT IM+ app , if you exit the app w/o logging out of messenger app you keep getting this wierd msg , i tried unintsallng the app but no luck , finally i relashed a new rom and the error went away.

SOLUTION
What you do is you sign in to AIM at a desktop computer, the screenname you signed in on your phone. than a message will pop up saying you are signed in at two places and if you reply to that window with "1" it will sign you out at the other location, your phone. that should stop the messages.
the AIM service on your phone used txt msgs and when you close the program without first signing out. it usually causes that problem.

Stealth message?
I've heard of this so called "stealth" text message used by the carriers to send commands to the phone. My next question is - is it possible to send one of these so called "Stealth" messages from a phone to anther phone - with the proper instructions encoded in the text msg to automatically appear either on the users screen or in their inbox? I have heard this is possible but am very interested if someone could provide me a little more insight on it....

It's possible, it's been done. Would you like to know how? How do you want to send the malicious code? BT? WIFI? MMS? Maybe I can get you my bank account number & ssn while I'm at it?
There are other forums for that type of stuff, some proggies to do this are actually security auditing tools. Most all means though require the user to acknowledge receipt of whatever you send & then require them to execute it. However, I sincerely doubt that anyone here is going to give you any means to do something that may harm someone's device. Sure, you just want to play a prank, but how about the guy you then teach it to?

Need help upgrading my Tilt

I have had a Tilt on the at&t network since it came out and I love it. A gentleman came into my store a while back with a Tilt and had the Touch Flo Cube running on his Tilt. He told me to come to this website and that someone on here would be able to help me do the necassary upgrades. His phone also ran streaming videos off of youtube and other websites. I am very very interested in both of these applications and really would like to get them running on my Tilt safely. The only problem is that I am a complete phone upgrading Virgin and everywhere I seem to look there are warnings to not install software unless I know what I am doing. I am scared to do these updates by myself because A, I have never done them before, and B I have already broken one Tilt due to dropping it in the snow five days ago. I really don't want to have to replace another one if this goes wrong.
If someone could please take the time out of their day to help me with these upgrades, then I would be eternaly grateful! You can PM me to set up a time and or a way for us to easily communicate if you would like to do so. To anyone that does, I want to thank you in advance for your time and for your concern.
Thanks guys(and girls)
Jeremiah

Very easy to do those.
First back up all your data.
Second CID unlock your phone so you can flash any roms you want.(caution-CID unlock might lock your phone if it's sim unlocked)
Third choose the rom you want. There are lots of great roms and great chefs. You just have to flashed them see which roms and cook is compatible for you.
Fourth just restore back all your data.
Hope this helps. Everything is in wiki and stickies. Just spend some times before you mess up with your rom since if something goes wrong, you will brick your phone.

I can tell you that the very first thing you will be told by everyone here is read. Read the Wiki on this site for the Kaiser. Read the sticky threads in this forum. Read the threads on the apps and ROMs you want to install when you decide which ones you want. You want to probably spend at least three or four days...preferably a week or more...just gathering knowledge. If you take a little time and figure out what you want and read up on how to do it and what kind of problems you are likely to run into and how to fix them....well....upgrading is a simple thing.
Until the end of October, I had never done this either. But I read the site for about three weeks after getting my Tilt. At the end of that time I decided to take the plunge. I haven't hit a single snag that I couldn't easily and quickly fix. Why? I read a lot and by the time I got ready the vast majority of problems had been found and fixed.
So my advice is take some time and read about all the things you need to know: HardSPL, any sticky with Tilt or AT&T in the title, Radios (because any non-AT&T ROM needs a different radio**), Kaiser Wiki, and threads on the ROM you want and apps you want to install.
**Note: asking why you have no sound in ANY thread after flashing your Tilt will most likely result in scathing responses as it has been asked and answered about 2309478320984731209184837 times already.

You have to spend some time reading all the stickies, threads at the top of this page learning about how to do this stuff. It doesn't take long and it's pretty basic as people have written instructions very clearly on how to do these things, just for the simple fact that you don't need to be PM'ed on how to do this stuff, you just read.
I think you made this almost exact post in the modify/upgrading/unlocking section and received some responses.
But no, cube navigation does not give you iphone effect in web pages.
You need to search/google things such as Ftouchflo config, kona's cube, etc etc. Have to read all this stuff as you will then be able to absorb all of this information for when things come up that you need to fix/change.
Oh and I don't think he really needs to flash his rom if all he want's is cube navigation. Should just need to install ftouchflo config and a kona cube .cab

Thanks guys.
I did post a similar thread in the Upgrading section and they told me to post my thread here, so that is why I did it.
The main thing I am looking to do is to be able to run videos off youtube and various other sites. Does my Tilt need to be unlocked in order to do that? My Sim Card is not unlocked, so this should not hurt anything when unlocking the phone correct?

If you are using your data connection to browse the internet and want to look at videos, i hope you have a data plan that can handle it or have some sort of media package with at&t that i dont know much about.
If you just want to watch videos on a wireless home or work lan connection, then I think there should just be htc streaming media player on your device.. i don't know why it wouldn't be included. Maybe it's in this list of cabs
Or you can search/google "tcpmp and flashbundle" and install those. It is a media player.
But again, just search/browse. All questions have been asked before and answered, so it's best to look for them yourself so you gain a broader range of how things work, trust me, makes it a lot easier.

If you are using your data connection to browse the internet and want to look at videos, i hope you have a data plan that can handle it or have some sort of media package with at&t that i dont know much about.
If you just want to watch videos on a wireless home or work lan connection, then I think there should just be htc streaming media player on your device.. i don't know why it wouldn't be included. Maybe it's in this list of cabs
Or you can search/google "tcpmp and flashbundle" and install those. It is a media player.
But again, just search/browse. All questions have been asked before and answered, so it's best to look for them yourself so you gain a broader range of how things work, trust me, makes it a lot easier.
and no i dont think the lock status of your phone has anything to do with surfing the web and watching a video off of youtube through the core pocket media player and flash bundle.

Yes, I do have a Data Plan on my Tilt. I do know a little bit about phones I work for at&t so I should. They just don't teach us how to unlock devices and install 3rd party softwares onto the devices.
I will look through the lists and see what I can find. Thanks again.

Useful plugins,upgrades for Kaiser

Hi all, was wondering if I could enlist your help?
I have an Orange Tytn II and would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
Any thoughts would be much appreciated...

richardS said:
Hi all, was wondering if I could enlist your help?
I have an Orange Tytn II and would like to;
- find available plugins which might include - skins and ways to upload, - Change the battery icon to a useful icon of a battery - rather than Orange one
- Change the time that the screen stays on when I'm on a call - so a reg editor
- Maybe upgrade to WM6.1 (without changing Orange menus etc)
Any thoughts would be much appreciated...
Click to expand...
Click to collapse
All your questions are answered here
And the first topics in first page of the kaiser forum.

I dont want to sound like a ass, but did you look around at all first? All of that is easy to find, well not the upgrade because you will not get that util your service provider comes out with that unless you want a new cooked rom.

Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?

richardS said:
Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
NO. Search and read some more before you ask...

Now ya all ganging up on me...
easy isn't it to say "RTFM".... and makes you look so good too...

I bet the Wiki will find you all the answers, and if not, the search will.
But seriously, quoting the post above you, or quoting in a thread with one single topic is almost as annoying...

richardS said:
Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
1) FdcSoft Task Manager
2) You need to Flash your rom to upgrade to 6.1. (so you will lose your orange stuff).
3) Varies on what you like. You will have to search on this, im affraid.

I think it makes you look good too that you don't care enough to do your own legwork. There is more than "hours" of reading here... try DAYS.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
Cut through the chaff? Maybe now you can see why there is SOOO much chaff! So yes, it is unreasonable to just start a thread because you don't care to search, try, dig deeper and go for it.
There are skins threads out the butt around here.
A regedit cab? Try PHM RegEdit
Cabs??? What do you call useful? How would WE know what YOU think is useful? There are 1,000's of cabs to install. Are you into photos? Music? GPS? Games? Putty? Contacts? What is it that YOU want?
Find your cabs by searching.... here is a starting point for you:
http://www.google.com/search?as_q=c.../forum.xda-developers.com&as_rights=&safe=off
http://forum.xda-developers.com/showthread.php?t=316183
http://forum.xda-developers.com/showthread.php?t=248409
http://forum.xda-developers.com/showthread.php?t=308773
How many pages shall I find for you? You didn't specify.
If you don't feel like helping yourself, you can start a new thread or reply to this one.

Okay, here is your one free "I'm too lazy to search & read" answer. I personally would've saved it for a "my device is bricked" question, but hey!
I use resco explorer. It is in my opinion the best file explorer & as a bonus it comes with one of the best & friendliest to use registry explorers & editors. Resco also allows you to easily network you computer to your PPC.
I get my full length battery bar, enhcanced scrolling & a much more effective X-button using SPB Pocket Plus. I have deleted the today plug-in portion of the app. so the size is more reasonable. This will also give you multi-tab browsing capability & allow you to use the ok button or X-button to only close one PIE page at a time.
There are tons of theme skins available, but why you would ask about those is beyond me. What's good depends on what you like because they range from plain black to cars to naked women. So, you're on your own there. Start with the "Show us your today screen thread" there are links to tens of thousands of themes there.
Also, get kaiser tweak & the current xml file for it.
WM6.1: If you're not up to flashing yet, you can still add some of the functionality of 6.1 to your stock rom. I suggest getting the PIE6.1 cab file. This will add zoom & overview capability to you current PIE edition. Also take a look at the current Arcsoft 5.0 version. This will add the Voicemail MMS option to MMS text messaging. (as of yet it still won't give you threaded messaging).
A hint for the future. Always search & read first. You can use search, then find a thread & once in the thread there is a search this thread button that will further help you slim down the amount of reading you have to do, it's called "search this thread" & will only return results for the thread you're currently in.
Also use the exclusion feature of advanced search. Highlight the forums that are pertinent to what you're asking. That way you don't get Blue Angel returns for your Kaiser question. I have over three hundred posts. If you look at my posts I don't think I've ever been flamed & I've helped several people with problems even from day one, because maybe I just read an answer that was no help to me, but was exactly what the next guy was looking for. It doesn't pay to be selfish here because everyone has issues, not just you & we've all had to read & work through them. What makes you able to say, hey I deserve an answer without reading (cut through the chaff) when most everyone else has taken the hard path & learned along the way.
Believe me that the reading will pay off in spades. You WILL have MORE problems with your Kaiser. Nature of the beast. I can't tell you how many times I've answered my own question because something I'd read earlier popped back into my mind. Reading will save you time in the long run & helps to keep the boards free of clutter.
That said, good luck with your new Kaiser.

It is just me, or does anyone else receive SPAM email in their personal email accounts?

Hey Grizzz,
Dang man we're opposites! You burn him down then soften the landing, where I like to raise him up then take out the knees! Either way it makes much more sense to do it one of those two ways.
Sure, I know the Noobie needs to have his wrist smacked, but why not do it in a way that ends the thread, like you or I do. Just reprimanding the kiddie does nothing but waste space. So help a Noobie out, take him under your wing & show him how things are done. Don't just reprimand him.
Maybe somew of the +1000 post old timers used to be like us too? Could they have become callus to where they came from? Except of course peep's like cmonex, Jockey, Dutty, Meinyysis, Olipro (I think they were all spawn with a pda in there hand & I heard that Oli's middle name was CE, lol...

You are right. But in the "old" days - AKA Hermes Forum one year ago FLAMING was hard and cruel . A noooob got FLAMED if he had not done his homework - and I find it was actually OK.
I remember reading for DAYS to find out how to FLASH, and IF I had any questions - I asked in a PM or in the specific thread....
I remember a long discussion about having limits for newies so they could not write in the Forum for some time after they joined to make sure they used some time reading before asking the same questions again and again...

Martinhdk said:
You are right. But in the "old" days - AKA Hermes Forum one year ago FLAMING was hard and cruel . A noooob got FLAMED if he had not done his homework - and I find it was actually OK.
I remember reading for DAYS to find out how to FLASH, and IF I had any questions - I asked in a PM or in the specific thread....
I remember a long discussion about having limits for newies so they could not write in the Forum for some time after they joined to make sure they used some time reading before asking the same questions again and again...
Click to expand...
Click to collapse
Yeah, I remember lurking in Hermes afraid to ask. I once even PM'd Meinyysis & bit my nails for days hoping that the response wouldn't be "Go Die". Not that he'd ever do anything like that, but Hermes forum was brutal at times.

I dont understand why people are hesitating to help instead enjoy having the attitude and reply harsh. If a thread is unnecessary, then the moderator can lock the thread.
This person was looking for some openion. He is not asking how to install something.
1) If you dont want to reply, ignore the post
2) If you care this site and feel the thread is unnecessary, PM mod and ask him to lock the thread
3) To control these kinds of thread and you really get annoyed to answer question which you asked when you were actually a newbee, try to organize this site. Evaluate the members before they join.
One smart person gave the link for search. What an attitude. I am not sure what he is thinking about himself. I seriously hate the attitude of some people here.
MartinH - Please dont feel that all the posts are directed to you.

richardS said:
Now ya all ganging up on me...
easy isn't it to say "RTFM".... and makes you look so good too...
Click to expand...
Click to collapse
Ah, to live life unencumbered with things like common sense...

In newbie's defense...
I haven't asked any questions and I search the threads and wiki's, but I have to say that this forum is not the easiest thing to find anything in because every thread is packed full of non sense that has nothing to do with the topic. The guy simply asked if there was a way to find plugins and such.
Give the guy a break and just send him a link . I wish there was a better search engine on this forum, but there isn't so I continue to read...and read and read...

jtb74129 said:
I haven't asked any questions and I search the threads and wiki's, but I have to say that this forum is not the easiest thing to find anything in because every thread is packed full of non sense that has nothing to do with the topic. The guy simply asked if there was a way to find plugins and such.
Give the guy a break and just send him a link . I wish there was a better search engine on this forum, but there isn't so I continue to read...and read and read...
Click to expand...
Click to collapse
vBulletin has a bad search function itself. However there's a advance google search that correctly search the site,

i have the tytn ii and am very new to it
im looking to put message/alert tones on but dont know where to put them..
ive got a few good alerts that id like to put there....ie. new email/message that sort of stuff
please could someone show me the way to go on
thanks in advance

I am a member of various forums, and mod two with more members than this forum. Here's my thoughts;
This forum is full of useful info, but it's also buried amongst huge piles of crap and spam
1) vBulletin software sucks...try IP.B
2) If you feel the urge to reply, reply with something useful
3) If you feel the thread is a waste of time don't add your spam to it. It makes you look more of an arse than the poster; Martinhdk and we3zy
4) Post counts mean nothing, see point 3)
for the persons who actually added useful info to this thread, then thank you, you know who you are.
To the Mods..I've copy and pasted the useful info, so by all means delete this thread, as no one found it useful but me... and save this forum getting more cluttered.

Chefs - How Do You Cook Registry Tweaks?

Newbie who has evolved from basics to cooking solely with the great information that is included here (and the great tools). Haven't asked any questions in anything but the accessories sections until now - hope I don't start with a stupid one. Do my part by answering most questions that I can and I have searched for literally hours on this without finding a definitive answer (I swear I'm not too stupid).
How do the great chefs cook their registry settings in? Do you edit the hives during the cooking process every time? Seems like there should be an easier way than how I am doing it and I can't seem to find a definitive answer anywhere. It takes me forever to export the files and edit them to my liking only to have to cook another version 20 minutes later to fix some custom package issue. I've looked everywhere for the right solution...tried everything from manually editing to using Settings Savior, etc and nothing is the answer I'm looking for. Not very advanced as a programmer, but should understand enough to figure this out. I like most of the changes suggested by KaiserTweak and want to integrate them plus some others (the WiFi registry edits for the Comm Manager, etc.). Is a provisioning.xml file the answer? My ROMs are generally just for me - but I have had one or two people ask to try them and I hate that you still have to tweak so many settings (via KaiserTweak, etc.) after flashing to get them the way I really want them. Thanks much for any help you can give me.
Actually - one other question. Now that I'm to this point I'd like to start making some donations to those that have created the tools that have made it possible for me. What is a standard donation? Don't want to offend either way. Thanks again.

Bump. I know I didn't wait long, but it made it to page 3 overnight.

Guilf said:
Newbie who has evolved from basics to cooking solely with the great information that is included here (and the great tools). Haven't asked any questions in anything but the accessories sections until now - hope I don't start with a stupid one. Do my part by answering most questions that I can and I have searched for literally hours on this without finding a definitive answer (I swear I'm not too stupid).
How do the great chefs cook their registry settings in? Do you edit the hives during the cooking process every time? Seems like there should be an easier way than how I am doing it and I can't seem to find a definitive answer anywhere. It takes me forever to export the files and edit them to my liking only to have to cook another version 20 minutes later to fix some custom package issue. I've looked everywhere for the right solution...tried everything from manually editing to using Settings Savior, etc and nothing is the answer I'm looking for. Not very advanced as a programmer, but should understand enough to figure this out. I like most of the changes suggested by KaiserTweak and want to integrate them plus some others (the WiFi registry edits for the Comm Manager, etc.). Is a provisioning.xml file the answer? My ROMs are generally just for me - but I have had one or two people ask to try them and I hate that you still have to tweak so many settings (via KaiserTweak, etc.) after flashing to get them the way I really want them. Thanks much for any help you can give me.
Click to expand...
Click to collapse
I'd suggest reading this post, which basically says, make an OEM package.
Guilf said:
Actually - one other question. Now that I'm to this point I'd like to start making some donations to those that have created the tools that have made it possible for me. What is a standard donation? Don't want to offend either way. Thanks again.
Click to expand...
Click to collapse
Anything you choose to donate or can afford. Average is about $20, I've seen as low as $5 and as high as $50.
Guilf said:
Bump. I know I didn't wait long, but it made it to page 3 overnight.
Click to expand...
Click to collapse
In the future, if you want a timely response, I suggest you reply to an existing thread. It seems most folks (including myself) use the thread subscriptions tab in the user control panel, so we read the threads we're tracking first, and if we have time, we look at the forum for new threads. Otherwise, your thread will be lost in the shuffle...
Hope this helps!

Alex - thanks a lot....for everything you do. You're exactly who I was referencing when I thought of my first donation. Love your work/help here and your work on the Kitchen is the reason I can cook. Sorry I asked something that you'd answered - I thought I read every post in your latest Kitchen thread (actually most of your threads) multiple times. Been looking for this answer for a while.
BTW - my girlfriend works for IBM and we are up in your area quite a bit. Nice place to live.

Who’s Software is “World Clock”?

Who’s Software is “World Clock”?
Hi All,
On 7/13 I posted in the Touchpro II forum informing that there are many cities in the GMT +5 time zones which display the wrong time in the World Clock function. This includes most of the countries which end with a “stan”.
http://forum.xda-developers.com/showthread.php?t=724913
It received zero replies.
I’m OK with this. I am at peace with the fact that I am the only guy with a TP2 (Tilt 2) that cares what time it is in Tashkent, Uzbekistan. (Please feel free to make fun of this if you’d like – fire at will!) But the bottom line for me is that I need the clock to work, I paid a lot of money for the clock to work, and the software is obviously written wrong.
So now my question is this; who’s program is this? Did MS write it as part of the 6.5 OS, or did HTC add the feature. I need to know who to address my complaint to. If it’s MS, will it be screwed-up in WM7 as well?
Thanks,
Dave

Please cool down, nobody is here to make fun of you.
Moved to Q&A might get answers there.
Please try google if you haven't already.
madnish30.

I'm School of Cool Dude!
Dear Madnish30,
I am cool. I’m very cool. Or at least I was – until I received my most recent “help”. My open invitation for members to poke fun at me was both an acknowledgement that I am aware that not a lot of people care what time it is in Tashkent, as well as an attempt at self-deprecating humor. Although I am determined to get my issue resolved this was in no means a rant of any sort. Perhaps it was cultural and you missed my Yankee Sinicism. Regardless, if you perceived it other than how I meant it, then it was obviously a swing and a miss on my part and I will give some thought towards my writing style. I sincerely apologize for my failed attempt at humor.
Although suggesting that I go goggle myself sounded more like scolding (which I suppose is well within your authority as a moderator) than help, I took your suggestion and tried Google in an attempt to learn the proprietor of the World Clock software with no luck.
As for moving my post, I had posted in the software development forum for a couple of reasons: First and foremost, I figured that people who write software for these devices might be intimately familiar with the entity responsible for the World Clock. Secondly, I suspect there are those among us who might be able to instruct me on how to go into the registry and fix this myself. I am not an expert and tinkering with the registry without specific instruction is probably not a good idea for me, but perhaps I will make this the subject of a more specific post. There exist 265 different forums here. Again I apologize for picking the wrong one.
In the mean time, Leslie (who apparently has no job title) from HTC has weighed-in with her help. Here’s what she had to say:
Hello Dave, Thank you for contacting HTC. I understand your frustration. This may be a problem with the world clock which would need to be addressed in a rom update which would have to be requested by AT&T. By changing the system clock it changes all times, if you are spending extended times in these areas, you can turn off the HTC sence and use the base windows operating system. I hope that answered your questions, if you have any other issues or questions please feel free to contact us. HTC Technical Support www.htc.com www.pcddevices.com www.windowsmobile.com
To send a reply to this message or let me know I have successfully answered your question log in to our ContactUs site using your email address and your ticket number 10USCW31ENA000708.
Sincerely,
Leslie
HTC
Obviously this is not a great deal of help to me, but if I read into Leslie’s response, it is a clue that the World Clock is probably an HTC product.
Madnish30, I openly challenge you Sir. That’s right; I am publicly calling you out. You profess to be here to help, and I need help. If you have a World Clock on your HTC device (any HTC device with any carrier) I need you (and anyone else who feels like helping out please, please, please!) to please do the following:
Go to your World Clock and add the following two cities; Muscat, Oman and Tashkent, Uzbekistan. These two cities should be 1 (one) hour apart with Tashkent being one hour later. If they are not, your World Clock is probably completely absent the GMT+5 time zone.
I would be sincerely grateful to anyone who would take the time to give this a shot and let me know the result. This would be beneficial in that I would gain the knowledge of how wide-spread this issue is. While we’re at it, perhaps we could, in light of the degree of research and amount of helpfulness of Leslie’s response, come up with a title for her. So far I’ve come up with:
Vice Minister of Propaganda
Deflection Department Associate
Assistant to the Elimination of Complaints Department
Assistant to the Regional Manager (Only funny to those who follow the U.S. sitcom “The Office”)
Moderator
With respect and gratitude,
Dave

XATAGuy said:
Dear Madnish30,
I am cool. I’m very cool. Or at least I was – until I received my most recent “help”. My open invitation for members to poke fun at me was both an acknowledgement that I am aware that not a lot of people care what time it is in Tashkent, as well as an attempt at self-deprecating humor. Although I am determined to get my issue resolved this was in no means a rant of any sort. Perhaps it was cultural and you missed my Yankee Sinicism. Regardless, if you perceived it other than how I meant it, then it was obviously a swing and a miss on my part and I will give some thought towards my writing style. I sincerely apologize for my failed attempt at humor.
Although suggesting that I go goggle myself sounded more like scolding (which I suppose is well within your authority as a moderator) than help, I took your suggestion and tried Google in an attempt to learn the proprietor of the World Clock software with no luck.
As for moving my post, I had posted in the software development forum for a couple of reasons: First and foremost, I figured that people who write software for these devices might be intimately familiar with the entity responsible for the World Clock. Secondly, I suspect there are those among us who might be able to instruct me on how to go into the registry and fix this myself. I am not an expert and tinkering with the registry without specific instruction is probably not a good idea for me, but perhaps I will make this the subject of a more specific post. There exist 265 different forums here. Again I apologize for picking the wrong one.
In the mean time, Leslie (who apparently has no job title) from HTC has weighed-in with her help. Here’s what she had to say:
Hello Dave, Thank you for contacting HTC. I understand your frustration. This may be a problem with the world clock which would need to be addressed in a rom update which would have to be requested by AT&T. By changing the system clock it changes all times, if you are spending extended times in these areas, you can turn off the HTC sence and use the base windows operating system. I hope that answered your questions, if you have any other issues or questions please feel free to contact us. HTC Technical Support www.htc.com www.pcddevices.com www.windowsmobile.com
To send a reply to this message or let me know I have successfully answered your question log in to our ContactUs site using your email address and your ticket number 10USCW31ENA000708.
Sincerely,
Leslie
HTC
Obviously this is not a great deal of help to me, but if I read into Leslie’s response, it is a clue that the World Clock is probably an HTC product.
Madnish30, I openly challenge you Sir. That’s right; I am publicly calling you out. You profess to be here to help, and I need help. If you have a World Clock on your HTC device (any HTC device with any carrier) I need you (and anyone else who feels like helping out please, please, please!) to please do the following:
Go to your World Clock and add the following two cities; Muscat, Oman and Tashkent, Uzbekistan. These two cities should be 1 (one) hour apart with Tashkent being one hour later. If they are not, your World Clock is probably completely absent the GMT+5 time zone.
I would be sincerely grateful to anyone who would take the time to give this a shot and let me know the result. This would be beneficial in that I would gain the knowledge of how wide-spread this issue is. While we’re at it, perhaps we could, in light of the degree of research and amount of helpfulness of Leslie’s response, come up with a title for her. So far I’ve come up with:
Vice Minister of Propaganda
Deflection Department Associate
Assistant to the Elimination of Complaints Department
Assistant to the Regional Manager (Only funny to those who follow the U.S. sitcom “The Office”)
Moderator
With respect and gratitude,
Dave
Click to expand...
Click to collapse
Dave,
Indeed the way your wrote did not convey your message very clearly and wasn't humorous to me at all. I suggest that you do not use your "yankee-cinisim" here at XDA; since people like me may not get it. Though i accept your apology. ( Sarcasm is wasted when used over text. ).
Regarding my suggestion to you, regarding the use of google ( wonder why you typed goggle ? ); i don't find it anything like a scolding? It was meant to help you solve your problem.
Now you had posted in the Windows D&H General forum ( not the software development forum ) and that the rules clearly state is meant for
The Development & Hacking Section is open for users to post there contributions (application/themes/software) to the XDA Community, and is open only for this reason. Any post which does not do this, makes searching for a specific application or theme impossible.
Click to expand...
Click to collapse
not general question & answers; no matter how important the question may be.
Regarding you questioning my intentions of helping users here at XDA, i do not need to prove it to you and do not appreciate the comment you made.
We moderators are here to help run the Forum smoothly on voluntary initiatives, so if we did not intend to help other members why would we be here at all ?.
I suggest you do not question the intentions or functioning of a MOD.
Dave, seriously there is no need to use phrases like " i openly challenge you/ I am publicly calling you out. " it falls under the category of flaming here, and flaming is against the Rules.
Now, just to help you i can confirm that in my world clock the time differnce between Muscat, Oman & Tashkent, Uzbekistan is 2 Hours ( Tashkent being ahead ) not 1 hour as it should be ( i checked google for the real times ).
If you are talking about the clock which is found on Sense interface/ Titanium interface it is certainly developed/written by HTC ( with customizations done by carriers ), Micrsoft respectively. And you possibly can not find that information on the internet.
If you are talking about some 3rd party clock; nobody can really help you.
I again repeat myself cool-down, get rid of your frustration and then post again.
Consider this a warning.
madnish30.

Dear Madish30,
You have been extremely helpful and I sincerely appreciate your selfless effort on my behalf. This makes a huge difference as you have been the first to verify that this anomaly is not confined to my Tilt 2, my service carrier, or even any particular variant of the TouchPro2. I believe through forums like this I will soon learn the scope of this issue. For this reason, and with information gained here, I intend to again appeal to HTC for a simple fix. Other cities affected include:
Dushanbe, Tajikistan
Bishkek, Kyrgyzstan
Chardzhou, Turkmenistan
Islamabad & Karachi, Pakistan
There are probably many others, but these are the ones I checked in a search to get the correct time displayed on my device while in Tashkent. This is very annoying and difficult to work around as I’ve found that the time on the today screen does not automatically adjust in most of the countries I travel to outside of the U.S. even if the network is 3G. I usually have to select the city as the default manually from the world time menu. This is not a big deal, but when I selected Tashkent, I discovered that the time was wrong. No problem I thought, I’ll just select another city of similar longitude. I can’t find any cities in the database with a correct GMT+5 local time. I can change the time of any selected city, but this changes the displayed time of ALL cities.
Additionally, assuming that someone is going to have to write a fix for this issue anyhow, it is slightly annoying that the most important time zone that I use, GMT or Zulu Time, is not available as a selectable city. Many industries (to include the entirety of the aviation industry) use this as a base or reference time for everything. Call it Greenwich Mean Time (GMT), Coordinated Universal Time (CUT), or Zulu – it makes no difference. Every other world time program, to include the clock in the bottom right of your Windows computer, contains this as a selectable option.
As you are probably aware, when one contacts customer service their fix for everything is always to reinstall the rom. This is a lot of work, and obviously will not affect this issue.
Sincere Thanks,
Dave