can anybody please give a CLEAR explanation with a step by step and SPECIFIC changes they have made to have
an AUDIO GAIN on their phones.
i have read everywhere and so far nothing is well explained
Improve Sound Quality of Speaker Phone
HKEY current user/controlpanel/soundcategories/ring : put 5 in initvol and speaker.Repeat the same at HKEY current user/controlpanel/soundcategories/ringpreview."
You might have observed that when you turn on speaker while during a call, the other person has complained of too much disturbance on the line and can hear more of static then your voice. Here's a fix to improve mic sensitivity:
HKLM\Software\HTC\AUDIOGAIN(x)\RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM\Software\HTC\AUDIOGAIN(x)\EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where 'x' = 0, 1, 2
Related
Hi,
I don't know how many of you are suffering from this problem, but I found the solution in the startrek forum.
http://forum.xda-developers.com/showthread.php?t=270816
All you have to do is to go to :
HKLM_LOCAL_MACHINE/Software/Microsoft/Bluetooth/A2DP/
Create the folder : Settings
HKLM_LOCAL_MACHINE/Software/Microsoft/Bluetooth/A2DP/Settings
then create the Dword
Value name=BitPool; Value data=40 (Decimal)
the value 30 gives a too Low audio quality.
the values 48 et 58 creates too much audio lag.
I have been testing this solution for 2 days with a qtek 8300, using tornado power control for overclocking to 223 Mhz.
Hi,
I'm looking for a small app or a registry hack that avoid the smartphone to switch off the speaker when a conversation is engaged.
I'm using an HTC touch 3G (Jade) with a bluetooth headset JABRA BT8040 (configured to get the free-hand and NOT the A2DP).
So, In a normal situation, the GPS instructions are sent to the speaker and the conversation to the Jabra headset. But when I answer a call the speaker switches off automatically and I can't hear the GPS instructions anymore untill the end of the call. Does anyone knows how to activate both sounds together?
By looking on the xda-developpers forum, I've seen that using some HTC splitter had this effect but it is not clear why.
Thanks for your help
I've tried the following hack but nothing is working:
1. Change the HKCY/ControlPanel/Volume EnableAdjustHSVoulme = 0 (instead of 1) : it seems it has no effect
2. Change the HKCY/ControlPanel/Volume Mute = 0 (instead of 3) : "no effect" In fact some application does not produce sound anymore.
3. Change the HKCY/ControlPanel/Volume Mute = 0xffff (instead of 3) : no effect at all.
Is there anybody that has an idea about the function of these keys? google does not give any info :-(
Thanks a lot
Hi All,
Just bought Samsung GS+ and the ringtone volume is very low (in spite of setting the ringtone volume to max) and I often miss calls. I tried Volume+ from the market but that doesn't seem to increase the call ringtone volume. I think the application works on rooted devices only. Also, found an interesting article on the web. See below. But when I enter the code *#*#197328640#*#* nothing happens. My mobile is running on 2.3.5. Not sure why the code doesn't work
Code:
A) Enter service mode by typing below code on your dialer :
*#*#197328640#*#*
click the following:
[5] AUDIO
[1] NB (VOICE CALL)
Choose Handset, headset, Speaker (which ever you want higher volume)
[1] VOLUME
[1] SRC Speech RX Volume
Change default values and higher the values any number of your choosing, here is an example:
[0]0_lvl : 68
[1]1_lvl : 72
[2]2_lvl : 76
[3]3_lvl : 80
[4]4_lvl : 84
[5]5_lvl : 88 Higher these values to until hear volume improvement.
Is there any hack or tweak so that I can increase the ringtone volume? Any help is highly appreciated.
Thanks a ton!
i have the same question, i need the right service menu code, the one from the i9000 doesnt work.
i started this thread to get people attention to this problem,we have very good camera 720p videos are preaty good,but sound recording is horrible,this is video recorded by me on live event in Belgrade arena,content is not important.you can hear how much sound is dissorted.
Link:
http://www.youtube.com/watch?v=93EtH2BsIvc&feature=plcp
Anyone had any solutions for this?
xGiox said:
i started this thread to get people attention to this problem,we have very good camera 720p videos are preaty good,but sound recording is horrible,this is video recorded by me on live event in Belgrade arena,content is not important.you can hear how much sound is dissorted.
Link:
http://www.youtube.com/watch?v=93EtH2BsIvc&feature=plcp
Anyone had any solutions for this?
Click to expand...
Click to collapse
its a live event.. huge speakers..!!! Distortion is natural..!!! logic i suppose...
check galaxy s with and without voodoo sound you will hear the diff,i know our phone doesn't support it,still i find sound recorded really high,if we could make it quieter.
I just found the answer on Samfirmware.com
But there's Camera Volume, so this seems a chance as any...
fair chance that RCV might refer to ReCordingVolume
Samsung phones.
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
I COPIED IT... u can try anyways..
after i do *#6984125*# what i must do?? i don t understand well... i m traying to do this *#6984125*#>menu key>key input>*#9072641*.... but doesn t work
Try this mod
http://forum.xda-developers.com/showthread.php?t=1453547
geekynoob said:
I just found the answer on Samfirmware.com
But there's Camera Volume, so this seems a chance as any...
fair chance that RCV might refer to ReCordingVolume
Samsung phones.
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
I COPIED IT... u can try anyways..
Click to expand...
Click to collapse
mhm when i try *#9072641*# nothing happens the other one opens servicemod but its empty,i know how to work in it i changed some values before of headset sound.now its just empty no option idk why. anyway you could try it your self if you put your phone close to your home speakers and let them run loud it will be same as live event.
Can someoune suggest me a method to increase headphone mic volume?
I've a problem with headset volume, I can hear other people but people have problems to hear me. I think that volume mic is very low. I tested also other headphones but with the same results. Without headphones this problem is not present.
In other phone threads I found an intresting method: ie with galaxy s2 you have to enter in a secret menu and change default mic value. There is a similar method also with Optimus One?
I've a rooted phone with stock rom and kernel.
Thankyou
Hi, I found a partial solution starting from here:
http://forum.xda-developers.com/showthread.php?t=1645682
Now for Optimus one, to increase headset mic sensibility I followed these points:
1) Hidden menu, on phone app dial: 3845#*500#
Now in this secret menu make attention because " with great power, comes great responsability"
2) Device test --> Sound test --> Audio call tool --> MicAmp calibration --> Subsystem calibration
3) I select:
Vocoder ON_Chip_0
Gain type = left Mic
(default data is 35)
--> Set Data 28 --> OK
4) Device test --> Sound test --> Audio call tool --> MicAmp calibration --> Subsystem calibration
Vocoder Stereo Headset
Gain type = left Mic
(default data is 35)
--> Set Data 28 --> OK
This will increase mic sensibility and now people can better hear me. I Personally tested this, and voice will became a little bit metallic but stonger and clear.
In the original guide there is also this point:
Write all to EFS --> OK
This command is present also in optimus one secret menu but it fail to permanently write these changes to memory.
This mean that on every reboot these changes will be lost and you need to set again these two parameters; I hope that someone with more experience can help me with this.