Hi,
Can anyone tell me if they have installed this on there prophet, and if so could you tell me the following as I am considering upgrading my Imate rom which is 2.13.9.23 to it.
1. Will it work with all networks, i.e Vodafone?
2. Do you still get MMS functions?
3. Is there any improvement from previous rom?
4. Is the device faster?
Many thanks
HI !
I run the Dopod Rom 2.15.13.27 here on my Neo device..
1) It will work i think, did never hear about any Problems. (in Germany, everything runs fine)
2)Yes, MMS will be activated with the ext.rom Packages that install after first start.
3)Don`t know about improvements, some say the Camera is not that good, but i think everything is just the same.
4)It definitely is ! Not much, but faster than the O2 Germany rom, when you`ve installed the ext.rom cabs !
Related
Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.
...at least the Operator for QTEK...
C'mon guys... help me.
Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.
Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...
Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...
The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.
The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
I got Jam and running 1.12.00 WWE ROM and 1.12.10 Radio 1.12.128 ExtROM . Last weeks i have tried to install BRS and i have succeeded but after a while i decided to original shipped ROM ( mentioned above ). Right after all these changings, my device started to fail getting SMS messages ( but sending without any problem ), i think while these tunings something went wrong or something and it caused this problem ( certainly its not about my SIM card or of its settings ). So here is my question : i wanna upgrade my device to the newest shipped ROM as well as the newest Radio vers. , in order to fulfill my aim what files ( i mean which ROM and Radio version and other needed apps etc. ) do i have to have and may i get them from xda ftp ? And my last request from you dear Masters, can this upgrade manage to solve my SMS problem ? This situation is getting very important for me day by day, its itching my brain every moment.
i dont think your sms problem is caused by the ROM. i did use 1.12, and had no sms problem like yours. now im using 1.13 rom and radio (but no ext rom), which i believe are the latest for magician at the moment. find them on the FTP. thanks
O2 Settings
Hi,
I've just upgraded to the O2 Big Storage Rom (WWE_O2_1.12.00.zip from the FTP), I was expecting (probably naiively) to have all the O2 settings etc to be installed as well.
There's no O2 customisation whatsoever and I don't even have the option for MMS in my messaging Folder.
Is there any way to just get the latest O2 Mini Rom?
Or to at least get the settings - i'm assuming that they all come from the extended rom? If so, how should I go about installing that?
I have searched and there's so much going on, it all gets a bit daunting.
Thank you for your help in advance
C
Hello friends:
I've a T-Mobile SDA USA (with WM6 v3.6) and it works fine, but sometimes the phone funcionality stopped working (i can't make or receive calls)..and I need to restart the phone to work fine. Any idea?
Best regards,
I have the same problem with WM6 3.7 version, but restart device doesn't solve this problem .... sory for my english
yes last radio was upgraded
anyone
Any idea about the problem?
Have you guys run the latest radio upgrade?
yes I've done everythink format radio and WM6 flash
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
robsahm said:
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Yep! Just HardSPL, and then select an English ROM (most are) and flash.
Read the Sticky in this forum for guide lines on how to flash, and common problems and thier solutions.
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
Go there and READ and READ. (Read the Wiki first). You will find all your solution there. Everything you need explained over there.
I will describe the procedures you will need:
1. Back up your stuff
2. Charge up your phone to 100% and connect to your pc with usb make sure ActiveSyn can see your phone
3. CID or SIM unlock your phone first if it is necessary then.
4. HardSPL your phone (You can find the information in the Wiki)
- If you encounter White Screen Problem, check the HardSPL White Screen
Issue - Solved!
5. Find a Rom that you like
6. Find the radio rom that rom supports
7. Flash the rom
8. Do a HARD RESET when you see the "Tab the screen to setup windows mobile..."
9. Flash the radio rom
10. You are DONE!!!!!!!
As long as it's GSM band, then it should all work. You might have to manually setup the 3G network for Germany on your phone.
Thanks for the feedback! My main concern was not knowing if it would work with my carrier after I do the ROM.
However the 3G network is a BIG deal 3G is soooo much faster than GSM. Is it even possible to manually setup the network afterwards?
Thanks again, you have been great!
you can always setup your 3G network manually afterwards. It's just a different rom version. It's like you install English version of Winxp on your PC instead of the German version. You can still setup your wireless connection for your PC.
Sine you are in Europe, I would suggest you use Dutty's WM6.1 Rom (The bluetooth has a bit of issue - not able to receive file transfer, but he's working on the RTM version with the fix). Dutty's rom is cooked based on the Vodafone rom (He's in England), so I would suppose there should be pre-set 3G setting for Germany as well.