Tytn car charger? - General Topics

Regarding my previous post about tytn charging problem, seems to be related with my car charger and my univeral wall charger. Now i'm using the "in the box" wall charger with no problem. But i need a car charger to use tomtom. Someone suggests me a 2A mini usb car charger.Where I can find it?
Thanx

Hi,
brodit have released in car holders with cig lighter chargers for the TyTn,
www.dsldevelopments.com (to buy), they are listed on the homepage. or www.brodit.com (to view), does anyone know from upgrading whether the xda mini s / mda vario charger is compatable, I have not yet had a Tytn to test yet.
Cheers,
Bryson

Thanx for the infos...i ordered brodit active holder in italy.
Both my wizard wall and car chargers give me some problem in charging my tytn.

Related

XDAII and Globalsat BT-308 GPS car charger

Hi,
Does anyone know if the Car charger supplied with the Globalsat BT-308 GPS receiver can charge the XDAII also. I have all the connections to do it, but my question is more specifically, does it output 5v as is required by the XDAII (I think!).
Thanks!!!!

question about a car charger

my dad recently lend me his XDA IIs and i was wondering if i can charge it in my car using a usual ac chager (the one with the cig socket on the end and a circle ac with a yellow tip on the other) because the package came with an XDA IIs Connector Adapter.. a small connector that connects to the bottom of the xda and a plug where the xda 2 charger for the cradle on the other end..
can i use it to connect it with a normal AC plug for cars?
thanks a bunch!
ligther plugs from cars give DC i'm pretty sure not AC
and you may want to look at connectors in wiki
because ipaq's have the same plug as xda's
but different wireing and if the charger is made for ipaq's
then you need to mod them
you can buy xda2 2020i car chargers from any o2 shops for £19.99
jim
oh yeah cars give DC. sorry my bad.
my connector came with the xda IIs unit so i'm pretty sure its for the xda. i'm just thinking if i can charge it with a norml car cig plug DC.
well if the connector is the same
and + and - is connected the same
and it give the same volts
then you can use it
hmmmm + and - eh? hmm.. yeah.. i think it'll work. thanks!
It will not.
You need a 5 V DC outlet to your XDA II.
If you plug 12 V DC in you'll see what happens.
Sascha
Charging XDA2 from in-car charger
It does work fine. Have done this using 4.5v/600mA regulated dc/dc adaptor with plug matching that used on original XDA2 mains adaptor - centre is positive, outer negative . I know that mains unit is 5v/2A but my car adaptor works fine in car and boat. Of course you're not feeding 12v directly to your XDA.
thanks for the replies! yep. i wont put in 12v.. thanks for the advice. i'll probably do the same with tomdick. nice one. thanks.

Alternative charging device

I wonder if that would work.
I have a mobile PNA TomTom Device in my Car with a 12V (input) Charger. I realized that the PNA can also be charged by pluging it into the USB interface of my computer. The Jack is also a miniUSB. So the charger plug has the same connector. Am I right to assume that the Diamond has to be charged by a 5V (USB current) miniUSB interface?
So it may be possible to charge the Diamond with exactely the same charger from my TomTom device?
I don´t have the current output of the PNA charging device in mind but i assume that it also has to be 5V?
Is there a possibility that both connectors are differently wired? Or is the miniUSB of both standardized?
i dont have your tom tom device, but there are two standards. 6v and 5v. Make sure you check properly
The charging device from my TomTom has an output of 5V so i assume the pin occupation is the same and i can use it to charge my Diamond (to come).
Just to make some of you guys happy. You CAN actually use the TomTom car charging device to charge your Diamond.
Plug fits and power output is exactely the same as the original HTC car charger!
For me it saved spending 20€.

Diamond AC Adapter, Adapter

The AC (Mains) charger for my UK version of the Diamond came with, of course), the adapter to fit UK power outlets. The transformer/charger is cleverly made with a separate adapter (the two/three prong part that actually fits in the power outlet) that can be changed to meet the country standard. Does anyone know where I can buy a US style adapter for the charger?
Did anyone know of a place where I can buy the Amercan adapter for the charger.

Desire compatible chargers

Blackberry micro use chargers are all over the place. do any of these work adequately with our phone? Do they supply enough amps/volts?
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
without having testet this, i'd assume any USB Charger with an output of 5 Volts and 500 mA can do the job. I am using the original Charger, the one from my Sony Ericsson X1 and also a Sanyo Mobile Booster (Portable Battery Charger). They all work well
Charger from the hd2 works fine too! its all becoming very standardised now
Yeah, it's just I heard that certain chargers don't appear to work very well, with some people reporting that their phone has run out of charge when going on long journeys whilst using the phone as satnav - so using cables which employ the correct ampage/voltage could be important.
The micro USB Blackberry charger works fine on my Desire
Andy
I just got a 1 Amp one off ebay for about 3 quid. No complaints from me!
daverave999 said:
I just got a 1 Amp one off ebay for about 3 quid. No complaints from me!
Click to expand...
Click to collapse
Got the link Dave?
i'm using the HTC original charger car charger from my Touch HD, it's 2 amp and charges the phone in no time. Needed to get a mini usb to micro usb adapter from ebay though.
The Blackberry ones seem to be 0.5 amps and take ages to charge.
subharmonic said:
Got the link Dave?
Click to expand...
Click to collapse
Sorry, totally missed this. I just put 'usb charger 1a' into the search. The seller was 'arygroup'. It's not as quick as the one it comes with but it's fast enough!
The phone says it is charging from USB, whereas it doesn't with the proper charger. Not sure why yet...
I received my car holder with car charger a few days ago, it is labeled as a Moto.V8, and should output 1.5 mAh.
I don't know if it geniune Motorola charger or clone, always a surprise with eBay
Haven't tested it yet, all I hope is that it doesn't drain my phone while I'm using GPS navigation.
I've read some stories that certain chargers can charge, but when using GPS applications they will drain.
There are a couple of other posts about the same thing. Lets try and keep it to one thread. Better for updates etc
For those in the UK sainsburys are doing a 1amp car charger for 6 quid.
It includes two usb sockets, and is white.
When plugged into my desire, the phone reports that it is being charged by AC, and sat nav dosent drain the battery (in fact it still charges.)
Fon22
It's not as quick as the one it comes with but it's fast enough!
The phone says it is charging from USB, whereas it doesn't with the proper charger. Not sure why yet...
Click to expand...
Click to collapse
From another thread, it appears that the phone will only draw 500 mA unless the USB data pins are shorted together. A few minutes with a soldering iron and the charger works as well as the HTC one.
If you have any old HTC (Diamond etc) 1A chargers lying around just buy one of the Mini to Micro USB Charger Adapter Converters for 99p including p+p from ebay and use them!
I have run some tests on 500mA chargers and would be interested in hearing how someone else has got on with one (instead of a 1A).
At first I was using a 5 Volts & 500 mA Blackberry charger with a cheap micro USB cable and getting very slow charging. At first I thought this was the 500mA rating but then I got a brand new official Nokia micro USB cable and it seems to charge at a comparable rate to my official charger. I'm at a bit of a loss to explain it other than perhaps the quality of the cable has a lot more effect on charging than I thought (I don't think the data connectors have been shorted on the Nokia cable, I can transfer data fine using it)
-----
Smart Adopter - UK based tech hints, tips, news and reviews
http://smartadopter.wordpress.com
How about this:
http://cgi.ebay.co.uk/Tomtom-4A00-182-5A00-081-A05T2-05MU-USB-Wall-Charger-/310157216511
Seems to be the same output as the standard HTC mains charger..
Would this work ?
What about this one:
Input: AC 100-240V 50/60Hz 100mA
Output: 5V = 150mA
?
My HTC Desire came with UK plug and I cannot use it.
Tesco are doing a cigarette lighter splitter with a USB 5v 1A socket for £4-99.
It'll be getting a trial run down to Le Mans later.
AndyChecker said:
If you have any old HTC (Diamond etc) 1A chargers lying around just buy one of the Mini to Micro USB Charger Adapter Converters for 99p including p+p from ebay and use them!
Click to expand...
Click to collapse
I can confirm this =P. But you DON'T need to buy a new usb cord, just use the cord that comes with the desire and plug it into the Touch diamond Charger
I had the Touch diamond and Im using the touch diamond charger for this phone cuz it LOOKS way better (when i plug it in, HTC lights up ), and it charges almost twice as fast (Difference is very noticeable)
I was manically driving around to find a car charger, and EVENTUALLY found one at a Vodacom shop(in South Africa). It was made by Body Glove, and it's a 360 rotating device, with a USB port on it. The Micro USB cable that came with it is retractable, but I haven't used it. I used the cable that came with my phone. Will test it later. I drove about 200 plus miles with it, and my charge was good after the trip. My phone is still less than a week old, so the battery charge hasn't quite gotten to where it should be. Cost me about R99 (About $12)
By the way, the Micro USB connector will supposedly be the only connector on phones by 2012. It has apparently been standardized, so that people will just get a phone, but that all chargers will work on all phones. Too much waste from old chargers they say.

Categories

Resources