I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
hi guys
i have an i-mate JAMin and recently i've upgraded it's rom to dopod818pro
now i can't upgrade the rom via i-mate site.the process starts, but when it reaches 95%, it stops and after some time i get an error with the code 326, which means:
ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code
Click to expand...
Click to collapse
now, how can i solve this problem? is there any way i can upgrade form the manufacturer site (i.e. clubimate.com) ? or should i let go of this luxuary?!
i really really want to put an I-MATE rom on my pda...
Hello,
after i read a lot here i m not sure ift its possible at the end.I solved my Problem with the bootloader stuck.thx again.I need to send my device to O2 for garuantee repair.Therfore i wanted to install the latest O2 Rom on my G4.
I cant install it cuz it tells only update-> so 3 ways
1.downgrade ipl/spl doesnt seems to work
also dangerous
2 i only flashed the os with a tool without spl/ipl but loading pic still qtek and no o2 extended rom installed...
3unlocking the cid for G4 doesnt work 2 with lokiwiz3.a
HAve you guys any idea how i can restore my garuantee?i need to make my G4 looking untouched...
o2
Hy i have the same problem i tried more romupdates, and i can't update again main old O2 XDA NEO rom, if you know any abaut please send me an email [email protected]
may be someone could pass you the o2 splash screen here
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...