I previously posted a question, but received no replies. Just wondered if anyone can now help me. There is wi-fi at work which I am able to connect to. However, whenever I do so, the 3G, GPRS takes over and connects that way. I cannot understand why or get around it. I am on o2. My colleague is on T mobile - I set his wi-fi link up in exactly the same way and he has no problems whatsoever. I am desperate for your suggestions.
Are you using push mail by chance? I found that M$ push will try to connect to GPRS even when WiFI connection is established. IE goes through the WiFi connection (obvious speed difference) but push mail won't let me kill GPRS.
Haven't found any solution to this yet.
Any chance you have tried turning the radio off!! Of course you wont be able to receive/make calls)
Just a suggestion though
I had same problem but managed to solve it (I have a Qtek9100 a.k.a Wizard with WM 5.0)
You must go to "Settings", select the "Connections" tab bellow and the click on the "Connections" icon. Once there you must select the "Advanced" tab bellow and click "Select Networks" button where you'll find a drop-down (combo) box responsible for the programs that automatically connect to the Internet.
You'll probably find there the connections you set for the GPRS and MMS. All you need to do is create a new one (can call Wifi or whatever) and select it.
That's it. hope you can do it
Related
I dont have a data plan for my SP5m so my provider defaults any data access at a high "per KB" rate. Is there a way to prevent all GRPS/EDGE usage ? Ideally, I'd like to just be able to turn GPRS/EDGE "off".
the only thought I've had thus far is to use some "fake" settings so any attempt to use GPRS/EDGE would simply fail to connect.
Is there a solution or is my "fake" idea the way to go ? If I use the "fake" solution, what setting(s) do I need to change ?
I think all you have to do is delete the connection. Click the start menu then settings then connections and connections again. Then click on manage existing connections. Then take your stylus and hold it down on the connection name, for example for me it is tmobile, until a pop up box comes saying delete and connect. Tap on delete and your gprs settings are gone and you cannot connect.
If you want to keep your settings, maybe you can just create a new connection with fake settings and have that chosen as your connection when you dont want to use your providers GPRS.
The settings to change would be the number to dial, for me it is internet2.voicestream.com.
Goto Settings/Connections
Choose Connections, got to Advanced tab.
In "Programsthat automatically connect to internet should connect using:"
choose "My ISP". Or create new one with empty parameters..
Have fun....
deleted connection
Thanks for the easy solution (I like those types). I went ahead and deleted the GPRS connection. Things are behaving just the way I wanted !
jeeb75 said:
If you want to keep your settings, maybe you can just create a new connection with fake settings and have that chosen as your connection when you dont want to use your providers GPRS.
The settings to change would be the number to dial, for me it is internet2.voicestream.com.
Click to expand...
Click to collapse
stylus???
hmmm...I think SP5m does not have touch screen.
BTW: window mobile and window mobile smartphone are totally different OS.
humptybump said:
I dont have a data plan for my SP5m so my provider defaults any data access at a high "per KB" rate. Is there a way to prevent all GRPS/EDGE usage ? Ideally, I'd like to just be able to turn GPRS/EDGE "off".
the only thought I've had thus far is to use some "fake" settings so any attempt to use GPRS/EDGE would simply fail to connect.
Is there a solution or is my "fake" idea the way to go ? If I use the "fake" solution, what setting(s) do I need to change ?
Click to expand...
Click to collapse
This is not an easy solution to your request, but I just upgraded my QTEK 8300 to the latest Imate SP5M ROM and noticed that under the COMM Manager one can "Stop Data Services" by moving the joy stick to the icon or hitting number "5". It immediately stops the Data Flow (at least the G) disappears in the header. Not sure it is really stopping Data because when I go to WiFi and open IE, the G reappears. Might be due to the way I have my Cingular connections set up. I'll experiement some more and re-post later. I like the new ROM, snappier, the radio is much better in that I get a much better signal where I'm at.
Here's how you disable GPRS/EDGE Auto connect!!
Start > Settings > Connections > Manage my connections > Then just point to the list item and hold down until the menu pop up and select delete. Do it to all the items there such as T-Mobile / AT&T or Winmodem..etc... after you deleted everything and you go back to the connections page you will see "Add a new modem connection" under My ISP. Do not delete anything under "My Work Network"... Hope this help.
You can use Modaco NoData to disable GPRS/EDGE =D
Have a nice day
HI all,
first of all i want to thankyou all for this awsome site and keeping the good work going.
I need some help with wifi setup.
I tried to setup my wifi with my 8125 using wifi companion and wifi fofum and both detected my network and connected to it successfully however, when i try to connect to the net using internet explorer a msg pops up saying that "cannot connect" Dialed +some number and then it says No modem at above number. To check connections settings change them if needed. I upgraded my rom to the latest one from cingular how ever i never entered this number which it is showing. Can some one help me with this issue and tell me what should i do.
thanks in advance.
Ps:- I tried wifi companion and wifi fofum separately not together.
thanks.
sounds like internet explorer is trying to connect to gprs or cellular modem or somthing.
you need to go to settings, connections, advanced, select networks, and make sure the drop down lists are set to "My Work Network"
Also check under setting, wireless lan, powermode and move the slider all the way to the left for best performance. I cannot connect to any routers when it is in the middle (the default setting). I have no problems connecting anywhere with it set to best performance.
i have a problem with my s710...when i close pocketIE (from task manager) and stop gprs connection form comm manager, after few minuts the connection is up again! to stop this gprs connectin i must reboot my smartphone because in the comm manager wont work!
there is no other SW on my s710, so it's impossible that some program made che connection!
any idea?
Yep i get that too and no idea why
duncan1976 said:
i have a problem with my s710...when i close pocketIE (from task manager) and stop gprs connection form comm manager, after few minuts the connection is up again! to stop this gprs connectin i must reboot my smartphone because in the comm manager wont work!
there is no other SW on my s710, so it's impossible that some program made che connection!
any idea?
Click to expand...
Click to collapse
I also see a G (or E) in the middle and at the right hand side. And yes, according the manual the icon in the middle means G (or E) is available and the icon at the right there is an ongoing connection. I'm not sure whether the connection is actually used. I think there is no traffic. But that still leaves the question what initiates a connection on your guys S710.
On my S710 after re-enabling the phone function I only see a G (or E) in the middle, but not at the right. Also after some minutes.
I think thats a bug, when I use the gprs I get the small G instead of the antenna in the upper right corner. When I disable gprs it's still there. Has to reboot to get rid of it.
check email settings
you may want to check email settings. if you have selected to check your email account every X minutes the connection will activate automatically. uncheck the box or choose "never" and see if it happens again.
nope - both email accounts set to never
iberico said:
you may want to check email settings. if you have selected to check your email account every X minutes the connection will activate automatically. uncheck the box or choose "never" and see if it happens again.
Click to expand...
Click to collapse
Check Live Messenger
Hello,
I noticed the same issue.
I had to perform a factory reset (Clear) to solve it.
I traced this issue to Microsoft Live Messenger, which tries to connect.
Hans
I wonder if there is anyway I can get it to prompt me before using the gprs?
Sometimes, while browsing, my wifi will cut out and start using my gprs. Which is why I would like my phone to ask me whether or not it can use gprs.
My old P900 always asked.
I'm currently looking if I can create a utility to do just that.
bump as I have the same issue...
most of the times I never realise that WIFi is gone and gprs has been activated.
There must be a way to ask us if we want gprs connection before actually activating it.....
Yep, same problem here. Sometimes I even disable "Phone" in Comm Manager and turn on "WLAN" just to be sure I'm surfing via my WiFi router, and not GPRS/EDGE.
You can always disconnect GPRS via the Comm Manager. Most programs have a setting weather to chose connection automaticaly or you can set it to wifi or gprs(like Internet Explorer)
CY42 said:
You can always disconnect GPRS via the Comm Manager. Most programs have a setting weather to chose connection automaticaly or you can set it to wifi or gprs(like Internet Explorer)
Click to expand...
Click to collapse
That's the problem. The GPRS connection is active, but the GRPS in Comm Manager is disabled so you can't turn it off. I've seen some registry key changes that enable you to press the "red end call" key to stop the connection, but it soons resurrects itself and re-appears, and is still not enabled in Comm Manager to disable it.
I've not seen an option in Internet Explorer on the Smartphones to choose Wifi or GPRS, you just get "Internet", "Wap", "Secure WAP", "MMS", "Work". There is no option for Wifi only.
I been looking for a little program for a while now that prompts you when your Wifi connection has lost, and whether you want to continue with GPRS or not. So far, I've not found anything.
I've noticed programs such as Fring monitor such a connection and give you the option, but I would like to see something that is a seperate process and monitors the connection itself, and not just for one program.
duncan1976 said:
i have a problem with my s710...when i close pocketIE (from task manager) and stop gprs connection form comm manager, after few minuts the connection is up again! to stop this gprs connectin i must reboot my smartphone because in the comm manager wont work!
there is no other SW on my s710, so it's impossible that some program made che connection!
any idea?
Click to expand...
Click to collapse
You can apply this regedit in the way to disconnect gprs/edge connection simply pressing red button:
to resolve this problem:
Go to: HKLM-->Comm-->ConnMgr-->Planner-->Settings-->SuspendResume
and delete ~GPRS! value.
This value was couseing phone to keep active gprs connection by any meanings.
When you delete it, red button will close the connection again
Found this one somewhere one month ago.
Tested: it works.
Same problem here.
I have seen this issue discussed on several different forums. Is it a WM6 bug?
i just leave my gprs connection setting not set up. When ever i try and connect without WIFI i cannot use GPRS. This means i cant connect to the internet unless i have availble WIFI but at least i wont get billed for un wanted GPRS
hoice said:
i just leave my gprs connection setting not set up. When ever i try and connect without WIFI i cannot use GPRS. This means i cant connect to the internet unless i have availble WIFI but at least i wont get billed for un wanted GPRS
Click to expand...
Click to collapse
It´s sad Windows Mobile/HTC forces you to do these things just to prevent being charged withour your consent.
had to do the same thing, just deleted the whole gprs account ... I actually got billed for 214 "gprs connection" the last month, wich was very expensieve. This is actually a huge bug, hope someone will fix it soon.
Its a money eating bug!
Greetings all!
I was wondering if anyone knows the solution to my problem.
When i try to access live messenger or the weather update on my TP through 3G i get the connection error. When using it through WiFi it updates in less than 5 seconds.
Anyone know of any prossible solutions?
Thanks in advance
I had the very same problem, but it actually disappeared after a weeks use.
I really didn't do anything to solve it.
I have the same problem with my TD2.
Same here, works when I first soft reset but say a hour or two later it does not connect it says cannot connect to wap.cingular.com try again at a later time.
If you are on AT&T your settings should be as such;
Go to Settings\Connections\Connections, click on "Advanced" and "Select Networks", in the drop down boxes, set both to MediaNet and "X" out of there.
Go back to the Tasks tab and select "Manage Existing Connections" then click "Proxy Settings". Make sure that "This network connects to the internet" is selected and "Uses a proxy" is unselected.
Also clear out any proxy servers already listed.
You should be all set.
I have the Fuze version on at&t network. I've disabled 3G on AT&T's side so there is no way to connect through there.
Nevertheless, my phone ALWAYS tries to connect to the 3G network and i've disabled 3G connections using Nodata.cab, advancedconfig, diamondtweaks.
Still, the warning signs always come up:
"there is a problem connecting to the gprs service in your registered home network warning"
and this occurs, when I turn on the phone and many other times.
Is there a way to disable this warning? I know I cant connect, its because i disabled it!!!!
anyone? it comes up like 50x a day andi have to click OK to make it go away every single time
Have you unchecked the auto update setting for the weather program? Doing this worked for me.
did that, but didnt fix the problem. anything else that can be auto updating or trying to contact the 3G network?
Go to start -- settings -- connections -- connections --advanced -- select network.
Here I think you can change the defaults so that when ever a program tries to use internet it will either use wifi (if available) or nothing....
I have blocked the wireless internet access on all my lines and this is how I solved the problem of getting gprs disconnect warnings.
Hope this helps.
Is it possible to just disable this warning?
I'm switching between my personal and business SIM cards quite often, and I have the data connection disabled on the business card, while on personal I have a data plan, so I want to be always-online.
I disabled aGPS and now i dont get the warning as much. (remember, i disabled GPRS from att side).
when i start my phone, i get 1 warning (i used to get 3?)
maybe i'm on the right track...
But the point is not to disable features so they don't auto-connect to the Internet.
The point is for the OS to try to onnect automatically, but when it failes - it doesn't have to scream that to your face every 5 minutes.
I'm bumping this thread cause I did the same thing and want to know how to disable the message as well.
still no answer to this
Translating from Dutch, so bear with me:
Go to Personal > phone > network settings and put the band on GSM.
Note that you won't be able to use the 3G + H data connections then.
my father has the same problem on his Diamond, need help!
bump, i have the same problem as well
any solutions?
i have a solution.
download > install > and run NOGPRS.cab aka No Data. that will shut it up. i just had the same problem and i did that and now i havnt gotten any... i think i might get like one if i turn the phone on and off and what not, but other then that its fine.
Solution to GPRS warning message
Go to settings > Connections > Connections > advanced > select networks >
now check both options to 'my work network'
click ok
and reboot
the irritating message will go away.
until you again reinstall the sim into your phone and it will automatically reconfigure the settings.
Just repeat the above process.
solution
1. Tap Start.
2. Tap Settings.
3. Tap Phone.
4. Tap the Network Tab.
5. Tap the Network Selection Drop down.
6. Tap Manual.
7. Tap the desired network.
8. Tap Ok.