mini S setup nightmare... - General Topics

Hi everyone
I just recently bought an o2 XDA mini S and I just can not seem to get it to connect to the internet or check my pop3 email.
Keeps coming back with the following error message:
Cannot Connect
Dialed: mobile.o2.co.uk
No Modem at above number. To check your connection settings and change them if needed, tap Settings.
I have triple checked all the settings which were emailed to me by o2 - WAP, GPRS and MMS settings and all seem to have been entered correctly but dont work.
If anyone can help me Id be very greatful...Ive tried everything I can think of but am not getting anywhere with this
Thank you in advance

This is the gprs settings I use and it works
O2 GPRS settings (Email/Web):
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
Note: The "Mobile Web" service must be enabled for these settings to work.
* We've also been told of an alternative username of 'faster', with a password of 'password'
under connections\settings\my isp\manage existing connections make sure when it says select a modem - have cellular line (gprs) selected. And make sure O2 have mobileweb enabled at their end for your account. Their no is 202.
Next time better to post in wizard forum - you will get more responses.
I'll keep an eye on this post in case U need more help.

Hi Cath
Just try removing the SIM card wiping on something soft and all should work (but as above you must be on the correct tariff)

Related

WM6 proxy setting, quick help.

Hello.
I'm using faria's latest WM6 ROM, but can't find where to enter proxy server / proxy settings in accordance to t-mobile's guide. WM6 doesnt have the place where to enter proxy numbers as specified. After a little digging i heard you might need to change the settings in the registry for wm6.
Can anyone please advise?
Thanks!
12. Tap Edit my proxy server under T-Mobile GPRS.
13. Tap to check This network connects to the Internet.
14. Tap to check This network uses a proxy server to connect to the Internet.
15. Enter 216.155.165.050 in the Proxy server field.
16. Tap Advanced.
17. Tap HTTP.
18. Enter 8080 in the Port field.
Click to expand...
Click to collapse
I was able to configure mine just fine today, but I'll admit it took me a few tries in the past before I figured it out.
Go to Start --> Settings --> Connections tab --> Connections.
Since you're not using the standard T-Mobile ROM, just adapt the steps a bit to match up with what is on the WM6 ROM. Where it says T-Mobile GRPS in the instructions, actually use the My Work Network section on the device. You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Add a new VPN server connection
Edit my proxy server
Other than the My Work Network/T-Mobile GPRS thing, the steps were exactly the same.
Oh yeah, instead of 216.165.155.050 enter 216.165.155.50.
I did that and I was able to get an Edge connection and send/receive MMS messages from my Verizon phone.
Dave
sgtcasey said:
You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Click to expand...
Click to collapse
Hi.
When I goto Settings > Connection; "My Work" is no longer listed as a connection, only My Home.
How can i get back / add "My Work" ?
THanks.
Hmmm... I'm not sure. I have My ISP and My Work Network and I've always had that with the WM6 ROM's.
Dave
I know this is kind of buggy... I had the same issue.
If you add a new connection, call it My Work or something, and choose GPRS 3G for the type, and finish, it will put 2 connections, which will allow you to change between My Work Network again, etc. No registry hack needed, it's there, it's just not showing. By adding a 2nd connection, it will show your "My Work Network" again. Keep in mind, if you had MMS messaging, but no 'net until now, once the 'net works, you will have to change your MMS setting to "My Work Network" as well.
Now 'net and MMS works on my phone (Cingular 8525) on Tmobile, using only T-Zones and WM6 Thx for the help!

Please help me setup my Internet and MMS settings

OK i have a 750v from the UK and i use it with the Vodafone contract i got it with. I unlocked it so i can use it back home here in Cyprus when im here for the holidays etc but for some reason i cant get internet or MMS to work. I had found the settings off the Cytamobile-Vodafone (my phone provider, Cytamobile is owned by Vodafone now) website but they dont work.
So i called them (a few times) and they said they cant help me and the only thing they can do is send me a document with the settings written so that i can put them myself... I tried to several times but still nothing! The weird thing is that if i keep my Vodafone UK internet settings it works but i'm not sure if im going to be paying loads extra or not with those settings. MMS dont work either way.
--------------------------------------------------------
This is the: "Basic settings for WAP over GPRS" that i was sent
Account Name: cytagprs
Profile Name: cytagprs
Connect using
or Bearer Type
or Data bearer
or Packet: GPRS
APN
or GPRS access point
or Access Point Name: cytamobile
User id
or User name
or Login name: user
Password: pass
IP address
or Gateway
or Primary Proxy Server
or Proxy address: 212.31.96.161
IP address Port: 9201
Proxy Server Port: 8080
------------------------------------------------------
And they also sent me these settings for MMS
Profile name : Cytamms
Data Bearer : GPRS
Access Point name : cytamobile
User name : user
Password : pass
Authentication : normal
Gate Way IP address : 212.031.096.161
Homepage : http://mmsc.cyta.com.cy
Connection security : off
----------------------------------------------------
The voda UK settings for Internet (the ones in "My ISP") are:
Access point name: internet
username : web
Password : web
Oh also when i change the APN from "cytamobile" which i was given, to the Vodafone UK APN which is "internet" but i keep the Cyta-Voda username and password, internet still works. Im really confused.
Can some knowledgeable expert help me figure this out? Thanks and sorry for the huge post!
Try to hard-reset first, make sure everything are clean up.
And then, repeat your setting at menu
1. Setting - Connections
2. Manage Existing Connection - Click "NEW" and follow step-by-step (dont forget chooce Mode as Cellular Line (GPRS, 3G).
3. done
I already did a hard reset a few times and entered the settings and all but still nothing...

Tmobile email setting (no wap?)

I upgraded to wm6 and email setting doesnt have WAP?It only has Internet or work.Anyone know how to get email and internet with WM6?
wow nobody?
nobody knows the answer?
Follow this guide to get the internet setup (t-zones), then in email try work first, if that does not work, try internet.
1. In Settings/Connections/GPRS/T-Mobile Data:
Tmobile Data Connects to: WAPNetwork
Access Point: wap.voicestream.com
2. Add a 2nd GPRS option:
T-Mobile Data 2
Connects to: Work
Access Point: wap.voicestream.com
3. Then create TWO Proxies:
Settings/Connections/Proxy
First Proxy:
Name:Tzones Proxy
Connects from: WAP Network
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Second Proxy:
Name Tzones Proxy 2 Connects from: Work
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
4. In connections, click menu, then advance and set ALL connections to AUTOMATIC
5. To get the Exchange Server working:
(Exchange Server settings)
Options/Advanced
Connection: Internet
6. To get Pop mail accounts working:
(This will need to be done for each account you have)
Options/Account settings/Advanced Server Settings
Network Connection: Work
NOTE! The option to select which way to connect isn't available until you finish creating the POP account (go back in and change to: Work)
7. To get IE working:
(In Pocket Internet Explorer) Menu/Tools/Options/Connections
Check "Automatically Detect Settings"
Select Network: WAP Network
That should do it! Not all applications will work with this configuration, but Messaging (Exchange/POP3/IMAP) and Pocket Internet Explorer will work. Credits for the WM6 instructions to go http://dashapps.googlepages.com/ ! If the above instructions don't work, try completely deleting the connections and re-adding them.
wow thats funny, i had the exact same problem with my phone and tzones, and i figured out the exact same solution, cept on mine i dont need the proxy for the work connection to get the email to work and i have ie set to internet.
SDA instant messenger
With WM6 is there a way to get that instant messenger program that was on the tmobile SDA?Will it work?
PS thanks Elsmacko for the previous help!
gumbyandpokie999 said:
With WM6 is there a way to get that instant messenger program that was on the tmobile SDA?Will it work?
PS thanks Elsmacko for the previous help!
Click to expand...
Click to collapse
why would u want that piece of garbage? just get agile messenger, its much better anyway (search gsm forum for it)
thanks
pyrorob said:
why would u want that piece of garbage? just get agile messenger, its much better anyway (search gsm forum for it)
Click to expand...
Click to collapse
Thanks ,checking it out!

HTC Fuze Problems in Mexico's TELCEL

Hello everyone, well here is the thing im in Mexico City right now and looks like im going to be here for some time.
So now here are the problems i have with TELCEL
The day i added the SIM Card to my phone the 3G worked just fine all i needed was 2USD on Credit to get Internet.
But i used my 2USD on 2 calls and well it said that i needed to add more credit.
I added 10USD but now IE is just saying "Cant display the web page , cant find DNS server"
i called the crappy Telcel support ( and waited for like 1hr no kidding) just get this crappy answer "Sorry we dont have the configuration settings for your phone , in the call center we dont have information about newer phones only old onces"
I checked the Telcel Website and well they have the HTC Diamond on sell with the "Friend" (Amigo) pre-paid service, so they do have Windows Phones in here and the Touch Pro is the same as Diamond so i went to the Service Center and i showed them and explained but they were just jerks saying "If Telcel dosnt sell it even if its the same WE WONT HELP YOU"
i already did google's about all this i got the internet.itelcel.com crap but i still dont get the F. DNS settings.
i cant use Skype or Fring or opera or anything i even tryed with my own Proxy Server but nothing.
Also i cant send the F. SMS to number 500 with TODAS because for some wierd reason i cant send SMS in here.
Im using the newest TAEL ROM 6.5 and i changed radios like crazy, nothing works no MMS,SMS , WAP, GPRS, 3G.
i hope someone here can help me out... im hateing this TELCEL stuff but well theres no other company with 3G for GSM devices in here.
The MovileStart or whatever it is is just GPRS or so they said.
They should change the name from Telcel to FrustrationCEL
If someone can help me with the DNS Servers or something to send the SMS
Please help!!!!!!!!
connection wizard
try this homie
just drag it over to your mem card or however you put files into your phone and just install it then try to the connection wizard
edoka said:
try this homie
just drag it over to your mem card or however you put files into your phone and just install it then try to the connection wizard
Click to expand...
Click to collapse
OK i tried that cab and well it removed Mexico from the list and well still nothing...
the odd thing is i got an SMS from telcel saying that now i can use GPRS for free and everything but well the thing just wont connect.
anyone can help me????????
new rom
try flashing a new rom most chefs are including the connection wizard
or heres the settings
***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.itelcel.com (lowercase)
8.Edit Username to: iesgprs
9.Edit Password to: iesgprs2002
10.Edit Auth Type. to Secure
11. Save
Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://upaapps.telcel.com:8582/telcelwap.wml
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 148.233.151.240 and the port number is 8080
10.Edit Username to: iesgprs
11.Edit Password to: iesgprs2002
Select back or done
Select Activate Account
MMS
Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mms.itelcel.com/servlets/mms
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 148.233.151.240 and the port is 8080
Edit the Username to: mmsgprs
Edit the Password to: mmsgprs2003
edoka said:
try flashing a new rom most chefs are including the connection wizard
or heres the settings
***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.itelcel.com (lowercase)
8.Edit Username to: iesgprs
9.Edit Password to: iesgprs2002
10.Edit Auth Type. to Secure
11. Save
Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://upaapps.telcel.com:8582/telcelwap.wml
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 148.233.151.240 and the port number is 8080
10.Edit Username to: iesgprs
11.Edit Password to: iesgprs2002
Select back or done
Select Activate Account
MMS
Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mms.itelcel.com/servlets/mms
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 148.233.151.240 and the port is 8080
Edit the Username to: mmsgprs
Edit the Password to: mmsgprs2003
Click to expand...
Click to collapse
Thanks for the help but looks like that dosnt work on Windows Mobile...
here are my problems.
On Step1:
10.Edit Auth Type. to Secure
that is not on my phone.... im using TAEL newest 6.5 ROM
On Step 2:
i cant do any of those
i dont really care for MMS since i send emails instead (or used to)
and even when i change the home page in IE to the one you gave me it keeps saying:
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
------------------------------------------------------
Cannot find server or DNS Error Internet Explorer
Hope I Can Help!
Hi SAT117! Hope you are doing ok. I am from Mexico and I am using the Telcel carrier also, I recommend it better that the Movistar network.
Well, I also have a Fuze since last year and its working like a charm.
Here are the things that I had to do so I could use AT&T Fuze on Telcel.
First get rid of the MEdia net connections, delete them.
Then on Settings/Connections add a new one called Telcel Internet.
Select Cellular Line (GPRS,3G)
Access Point Name: internet.itelcel.com
Username: webgprs
Password: webgprs2002
Then press Finish.
You have made the internet connection.
Now you have to get rid of the AT&T Proxy. Go to START/PROGRAMS/TOOLS/PROXY MANAGER and then DISABLE PROXY.
(In case you have another ROM other than the AT&T original one, then you should be up and running with the Internet connection)
If you need MMS, WAP or other configurations let me know.
Hope you get it runnin'.
well still no go it connects it shows H and it shows that is connected, and i still cant get the phone to show the "you are out of credit or something like that"
i cant use internet at all on the phone unless is over activesync or wifi
step by step help
hummm what a strange case ive been flashing a whole bunch of roms and radios to a whole bunch of touch pros and it never has happened anything like that to me so lets go through some possible things you havent done yet
first you are a senior member so im assuming you know all the details about flashing this and that yara yara ok so how about if before we go any further you try a different rom let's say an energy one since those are the most popular try this one EnergyROM_21885_RAPHAEL_24.Dec.2009_Standard if you are using tael's it's probably cuz you are looking for speed and stability i think this one should match what you are looking for ok still no luck?
ok theres a cab that gets you going with al Frustel's lol! configs http://rapidshare.com/files/43254754/Telcel_Mexico_PPC.CAB still no luck?
ok flash this radio (one of the best in my opinion)
RUU_Raphael_Radio_Raphael_52.58.25.30_1.11.25.01_Ship
"google it" nothing?
ok try manually to set up the internet config it is as simple as
internet.itelcel.com then webgprs and right below webgprs2002 that should do (i think by now you know where that stuff goes)
if failed call asterisk 264 talk to someone tell em you have the diamond and you just purchased this gsm chip "i think" and that you want to use the internet ask em if you have to activate the amigo internet service with them and ask what are the fees they charge
make sure you have enough credit to surf the internet you can check that by dialing asterisk 133 it pops up a message telling you your available money hummmm let me see i think that's pretty much it oh if it is possible for you ask a friend of yours or someone you know if they could let you borrow their sim card just to check if you can connect with their sim (if you do i guess u ll have to pay em like 10 pesos lol!) just to check if it could be a sim thing i hope you have luck finding a final solution for that by the way im not a movistar user but they do have 3g in Mexico city as far as i know if you need any other help with your phone while you stay in Mexico feel free to contact me via messenger [email protected] i owe xda-developers so much i cant stand and do nothing while one of my buddies from xda is stuck with something in my country. peace... JC.
o

Internet Settings help please for "Einstein Wireless"

Hi Everyone...
A few days ago I got a really good deal on a AT&T Fuze... I have long had my AT&T branded Tilt/Kaiser and had no problems using it what-so-ever. After playing with it a few days, I have done everything to it from HardSPL to rom to radio..... I have decided on NRG 's Energy.RAPHAEL.21889.StandardM2.5_27.Jan.2010 rom. This rom works great, has the features that I wanted, and looks nice too . I got the full rom which has a network setup that seemed pretty inclusive, but to no suprise, did not have mine, "Einstein Wiress" in wisconsin. I have all the settings it took to make it work on my tilt along with the "instructions" I wrote myself to make it work...
I would really appreciate it if someone who already is using their Touch Pro from Einstein could share the settings, or what I am missing. If you have an idea, please feel free to share it. Here are the "instructions".
Name for connection : EinsteinPCS Internet
access poin name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
Use Server assigned IP address
click ok..
under proxy settings check: "this network connects to the internet"
and "this network uses a proxy server to connect to the internet"
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
I hope this is enough.. Right now it now it show the "E" for Edge... (Einstein is a GPRS/Edge company, no 3G)// When I try to run a program ir "connects" and shows by the signal strength meter that I am connected... but every program gets nothing.. The weather, QuickGRPS, internet browsing, etc... All of these same programs are confirmed working with WiFi. I made sure everything is set to connect to the internet using "Einstein Wireless"... I have tried both transparent and non-transparent connections (I never had that option before) & I beleive I have tried all 3 of the the 9600 protocals in the advance settings... My tilt was set to chap (like AT&T)... If you have any questions feel free to ask...
Thank you in advance,
Teej
Ok Everyone!
After erasing all the internet settings again for the 5th time... I inputted everything in, made sure that 3G/UPSD options turned off, it seems to be working this time.. No idea what I did diffrent this time than all the others, but it works.. That is what matters... Thank you to all those who offered help via PM or in the forums...
Teej

Categories

Resources