Related
Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid
Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.
i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules
totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.
rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid
Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.
My BT620s is on the way, I can't wait. I will let you know how it works out.
computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.
Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.
i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.
Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.
An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?
Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.
sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????
hi,
i resently bought a heaset sagem BT sh1, (BT stereo headphone) and tryed to use them on my universal originaly with the 02 uk latest vanila rom, but it didn't reconised the headphone as such only headset, so i search on the forum and find that it was because of the missing A2Dp stuuf, so i upgraded and flashed the rom to WM6 wich resolved some of the problem but not totaly,
The headset work not problem to Lisen phone call and stuff, i can even lisen to the sound of the universal ok, screen tap and so one,
but when i start media player to lisen music, it does work for 4 second and then it stop, it doesn't shutter, it just stop, and work again for 4 second only if i close mediaplayer, and it work again for 4 second, i try the reg hack but didn't change anything, i try the a2dp upgrade as well no success,
i try other player no success, what get me is the fact that i cannot lisen any sound that are longer than a few second,
can anyone help me,
thanks a lot
ps i did pass almost all day looking for a solution on my own, without result.
my rom of my universal is Jwrightmcps Crossbow ROM Update 2.02.00 WWE
the O2 XDA Exec WWE Download to be exact.
If you hold it close, does it still happen?
dewild1 said:
If you hold it close, does it still happen?
Click to expand...
Click to collapse
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
A2DP
Sigiel said:
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
Click to expand...
Click to collapse
Hi!
Using "Resco Registry" or another registry editor program, find the following key:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
add new DWORD:
Priority256 with value 250 (decimal)
This should solve any lag problems. But to get hi-quality sound, you also need to tweak parameters here:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings
These are the values that result in the best possible sound:
UseJointStereo = 0
BitPool = 58
MaxSupportedBitPool = 60
MinSupportedBitPool = 30
Good luck
WBR, Draco.
hey thanks for the tips but it didn't work, the probleme isn't that i have lag, but that i simply have no sound that is longer than a few second. exept on headset phone mode, and the quality is very good anyway, after i did that reg hack it was even worse, (no offance intended) no i can't have any sound longer than one sec, and in the registery under HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2 DP\Settings
i didn't have any settings, not one. can it be sommthing missing in my wM6 rom ?
Hi,
I have a similar problem using Helmi WM6 rom...I have been using itech bluetooth headset for almost a year now without problems, after switching to WM6, each time my phone rings, i have to press once to connect the bluetooth to the phone and another time to answer,,,It was fine with the WM5 roms..any ideas?
Cheers!
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Hi everybody, I already tried to find an answer here but I didn't find anything related to that (but I'm an absolute newbie here so I could miss something... )
Anyway, I own my Cruise/Polaris since April this year e since the very beginning I've always had some problems using HTC AD2P bluetooth headphone BH S100.
I fixed some of them installing HTC's official fix ("HTC Touch Cruise_Cruise_BTheadset steady.exe") but the most annoying bug seems to be still here: after closing a conversation, Polaris freezes for 2/3 minutes and no command seems to work (neither tapping the screen nor using hw buttons).
During that time the device is unusable and - more disturbing - telephone services result unavailable (caller can hear the call ring but the device doesn't ring and doesn't record the missed call!).
Let me just add that this behavior occurs randomly, one or two times per week and only using bluetooth headset mentioned before (no experience with other bluetooth set).
Original ROM (1.25.408.1 ITA) and radio (1.58.21.23)
Did anyone ever experienced such kind of problem?
Thanks in advance for any suggestion!
...let me just add that the problem mentioned above recently occurs also with bluetooth radio off! And not only at the end of a conversation, but also during normal standby!
So, having excluded bluetooth responsibilities, this very much sounds like a WM hang.
Waiting for HTC official 6.1 ROM upgrade (if and when they'll release...), is there anything I can try to monitor/minimize the problem? Maybe a daily power off can help to clean memory registries or whatever can cause this weird behavior?
I still have above stock ROM & radio with few additional SW installed (Google Maps, MyMobiler, eWallet, Lotus Traveler, PHM RegEdit).
Tx
I use BH 100 as well. What happens is that with bluetooth you should only use wm player. If you use htc sound manager or S2P then when the call is out you will run into problems. Everything went away using wm player and cooked roms with the bluetooth fixes.
You can try the new ITA rom available (official) that udk put in the forum (http://forum.xda-developers.com/showthread.php?t=427625)
Tx pereirald, but the problem seems to be now independent from bluetooth's usage and I can exclude whatever music player as a possible cause (i.e. no players are running on my device during working hours).
Any other idea?
SOLVED!!!
Hi there,
Ever since I have my Touch Diamond and My cherished Nokia A2DP headset, I've been enjoying wireless music, calling and everything at the touch of a few buttons on my headset.
Recently I finally flashed to winmo 6.5, and I also decided that Touchflo was costing me too much precious memory. So I flashed to a nice clean rom (BsB).
Everything cool so far, that is, until I tried my BT headset. With out the touchflo player you're automatically dependent on windows media player, and if there is one piece of software that makes listening to music a b*tch it's wmp. So I installed pocketmusic. Everything fine so far. but the controls on my bt headset stubbornly only work with AND automatically start WMP. very irritating. after extensive searching of the beloved XDA forums I found out that this was a known problem. WMP Hijacking BT controls.
And finally it appeared I had found the solution: T-back's 6.5 BT driver.cab
This was supposed to give back the control of Bluetooth to the program running at the moment. all the coments left in said thread were joyous, it works, it's alive...
So I installed it, and too my suprise it did indeed stop WMP from hijacking the controls and also assigned the controls to pocketmusic...
Unfortunatly it also stopped the audio from going to my Bt headset, which kind of beats the purpose of a bluetooth headset.
So now I'm back to listening to music without T-back's driver, on my BT headset, and having to control my music on screen, which is a little irritating.
I've allready replied to the thread in hopes of getting a solution or something, but unfortunatly no reply.
I'm hoping someone beter technically endowed than me can give me a solution for this problem, this is the only thing standing between me, and my perfect rom!
HELP
Note, I tried this on 2 different winmo 6.5.1 rom's (benko's clean and the BsB 6.5.1)
note2: could this maybe be something having to do with the difference between 6.5 and 6.5.1?
Any help would be greatly appreciated!
I don't know about the ROM being the problem. You can try pocket player. It supports AVRCP by default. It also has a lot more features than Pocket Music.
dgaud007 said:
I don't know about the ROM being the problem. You can try pocket player. It supports AVRCP by default. It also has a lot more features than Pocket Music.
Click to expand...
Click to collapse
Same problem there, i've tried them both.
you wouldn't happen to knwo what the latest version was by any chance?
I had a version which I had to import a dll, to get exclusivity for a2dp controls.
Which also didn't work for me
*edit* Never mind, it's 4.1 ;-)
But it's not really the solution I'm looking for, I want to fix the problem internally (so I can use a2dp for any program I want, for example S2P)
*edit 2*
Tried it, still not working, it's still starting WMP, even with the extra wmp plugin which Conduits recommends for this issue...
So still in need of assistance
Crap! It turns out I have the same problem using ENERGY ROM, but hadn't notice since the volume control on my HT820 works OK. I'm actually using HTC Audio Manager (manila) so I don't get WMP, is just the FWD / REV controls on the headphones don't work. Looks like Conduits will provide a fix for their player in the next release.
dgaud007 said:
Crap! It turns out I have the same problem using ENERGY ROM, but hadn't notice since the volume control on my HT820 works OK. I'm actually using HTC Audio Manager (manila) so I don't get WMP, is just the FWD / REV controls on the headphones don't work. Looks like Conduits will provide a fix for their player in the next release.
Click to expand...
Click to collapse
Nope, there not fixing it, that is the fix, it's a DLL file. the problem he's having is he isn't able to check the box to override wmp control. which you can do by selecting it, and then pressing the enter key on your virtual keyboard, unfortunatly the fix did not work for me
this is the dll file you need to put into your player directory, which you can then configure through the plugins tab in pocket player itself (after soft reset)
Try it, maybe it'll work for you, it didn't for me
volume control does work for me as well though, but it's the only thing taht's working
Solved
Thanx to Zänker
You should install the two files from these posts.
With this one you can toggle a2dp manually once your headset is connected:
http://forum.xda-developers.com/showthread.php?t=437726
The following makes it toggle automatically after you connect your headset:
http://forum.xda-developers.com/showthread.php?t=502549
(you should have the t-back driver installed as well)
Worked for me, using the bsb 6.5.1g rom and s2p media player.
Click to expand...
Click to collapse
Is that player dependent ?
I usually use Pocket Tunes, and never had this issue with 6.5 builds (I indeed use BsB 6.5.1G atm). If it helps i use Sony-Ericsson HBH-DS970...
God_Lx said:
Is that player dependent ?
I usually use Pocket Tunes, and never had this issue with 6.5 builds (I indeed use BsB 6.5.1G atm). If it helps i use Sony-Ericsson HBH-DS970...
Click to expand...
Click to collapse
I had this problem with all the players I tried (except WMP, which was the culprit)
In case you're interested...
Juts fixed my AVRCP problem using HTC Audio Manager in NRG's ROM. I installed this version of audio manager and everything is working fine.
http://forum.xda-developers.com/showpost.php?p=5069731&postcount=1813
a2dp
A2DP doesnt work in my htc p3400i too after upgrading to wm 6.5 and it works in 6.1 ?