Database Info

Where do i Get Driver for XDA O2?

Hi All,
I just got a XDA O2. Wanted to connect to my PC. but when connected to my PC it asked for the device driver, which unfortunately I don't have now.
I am newbie. I am a software engineer though... Does not know anything about it. Mobile is a different ball game altogether.
At this point of time I only want to connect it with my pc and exchange some music images. But once I will be comfirtable, would think of serious programing.
Model no. : WIZA200
Platform: PocketPC
ROM ver: 2.21.4.1 WWE
Rom Date: 3/9/06
Any help would be appreciated.
Thanks so much for reading
Rahuul

Try microsoft Activesync. that's where all the fun begins

Hi Thanks for the info..
I installed ActiveSync but it is not able to detect my phone, its connected with my USB.
Any trick I need to do?
Thanks,
Rahuul

What version of ActiveSync did you install?
The Windows Mobile 2005 running devices require active 4.0 and above...
Try a soft reset of the device and of your PC if it doesn't sync first time
Cheers,
Raul

also try another usb port and maybe test another usb device to make sure the it works

rahuul said:
Hi Thanks for the info..
I installed ActiveSync but it is not able to detect my phone, its connected with my USB.
Any trick I need to do?
Thanks,
Rahuul
Click to expand...
Click to collapse
Hi Rahul,
When yr PC asks for the drivers, naviagate it to Windows/System32/Drivers....you will get this sorted out :lol:

Thanks a lot guys...
I Installed ActivSync 4.1 now and it worked. Earlier I installed ver 3.8.
Now, I need to explore the things that can be done.
-Rahuul

ROM Update Utility loose connection.

Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx

Flashx4u said:
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Click to expand...
Click to collapse
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?

The problem SOLVED!
ZRimaZ said:
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
Click to expand...
Click to collapse
So ,finally I found the solution with this issue and problem with my Prophet's restarting after it's registering to the cellular network (I wrote about it in another treeds as well).
After I tried to reflash my Prophet with different WM6 ROMs, different Radio ROMs, reassembled and cleaned it, reflashed to original WM5 ROM and nothing helped, I just came to an idee to replace the battery, unless Prophet indicated that still it's a lot of power (min 50%)...I ordered the battery and when I received it and replaced, everything is running as it should be!!!!

my pda doesn't work anymore after installation

Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)

pommie said:
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
Click to expand...
Click to collapse
Hi,
The answers you seek are in the WIKI.
Hold the backlight + power button whilst resetting the device. This will put you back into bootloader mode, you can then reflash the Rom.
I would also advise that you SuperCid your device before flashing any Roms, if you haven't done so already.
Again this is documented in the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Cheers,
Beasty

my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.

pommie said:
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
Click to expand...
Click to collapse
The problem is Vista!
Search the forum and you will find a post with a fix (old drivers) for Vista, or just use a Windows XP or previoous MS OS to flash your device.

I would suggest XP if you plan to keep flashing in the near future

do i need to super cid my htc universal in order to upgrade to ranju v77. my universal is branded dopod 900 and can use with any simcard. thanks

lucky for me, i also got a pc with xp sp2 but my pda works with ranju v77 thnx man.
only from nokia phones i can't send file with bluetooth, phones like samsung works fine

I-Mate Jam Bootloader & Connection error!

Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover

i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...

My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!

that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though

Same problem , PLS Help !!!
Thx for help

You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.

If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards

Keeper,you're awesome! I'm searching for JTAG,too

xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !

Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?

All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!

Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom

here..........................

connection problems while flashing SPL

Hello,
I'm realy going insane at the moment.
I try to degrade the SPL from SPL-1.0.OliPof (KAIS130 MFG, CPLD-8 <- whatever that means) back to the orginal one.
What I'm doing is:
1. connect the kaiser without sd card and sim card via active sync to my XP PC.
2. start the bootloader via button and stylus.
3. unplug the usb cable and replug
4. starting the KaiserCustomRUU tool.
the problem is that I always get an error 260 which means that there is no connection between pc and pda. by the way I already tried every possible solution mentioned in this forum.
What i figured out is that after I repluged the usb cable the computer detects the pda but is not able to install a suitable driver. So I have an unrecognized usb device in the device manager. I guess this is the issue but does anybody know how to solve it. I mean which driver is needed in this state?
can anybody help?
greetings,
macx

I must be misreading your post... you don't mention running JumpSPL/SSPL. If you're not doing that, then there's you freebie for the year, and also the solution to your problem.

sorry, my fault.
Point 2 is running SSPL of course. Version 1 leads to a white screen and the other two versions bring up the bootloader.
In the meanwhile I tried so many things that I was a bit confused when I wrote this post.
nevertheless I don't know what to do anymore to make it work.