I've install BlueSoleil to mypda and i can establish the network connection between pda and pc.
But i dont't know why my pocket pc cannot connect to the internet.
I tried everything but still not work.
Working Network types:
PAN: Auto IP, DNS, DHCP
PanGN : Auto IP, DNS, DHCP
LAP : Auto IP, DNS, DHCP
I need Nat ? Anybody know how can i set nat configuration?
Thanks
Related
Hi Folks,
I have set up my wife's SPV E650 to hook up to our wireless network at home so she can connect to the internet through the home wireless network. We have static IP's on our LAN. Although I have specified a static IP for the E650's wireless connection, I cannot find out where I specify the DNS servers to allow her to connect to the internet via our ISP, (I know the DNS server IPs, I just can't find out where I enter that info on the E650). So at the moment, I can connect to the home network, but cannot get onto t'internet!
It is quite likely that I am being a spaz and am missing something obvious... regardless, if you can help me, let me know!
Cheers
MW
even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address
Disabled said:
even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address
Click to expand...
Click to collapse
Thanks for your response.
All the other devices on my home network (laptop, PC, Xbox 360, SPV M3100) ask for the DNS server to be specified in a static IP environment, and they all connect to the internet just fine through the wireless network.
I am sure you are right, but I know that none of the above mentioned devices connect to the internet without the DNS servers specified.
So, question remains, how do I specify the DNS servers on the E650? Maybe a registry entry?
@mortalwombat,
i have the same problem with my htc s710.
Even though I run the wireless network with static IPs, I set my HTC S710 to get the IP "from a server" (= dynamic IP setting).
I did this after I tried with an IP Adress within my IP Adress Range.
So what happened is that my S710 somehow gets an IP Adress from my router that is almost in my regular IP Range.
You can try to set an static IP Adress within your Range first and then switch to dynamic IP Adress on you device..
Marcus
hi,ALL.
I have two ppc,A and B, A create a bluetooth PAN access point,B connect to A(especial reason,only B connect to A,not A connect to B).B have two network adapter,And B use NAT service.
A ip 192.168.0.1
mask 255.255.255.0
gateway 192.168.0.2
B ip 192.168.0.2
mask 255.255.255.0
gateway none
WiFi ip 192.168.1.2
mask 255.255.255.0
gateway 192.168.1.1 (This interface connect to internet)
Now, On A ppc,a few tool app can connect to internet,but PIE can't connect to internet,I think PIE use ConnMgrConnectionStatus api check status. What api can resolve this problem?
Hi everyboy, I have an Blue Angel with WM6.5.3 from sun_dream. I can't connect to my home wifi or any wifi. I configured my router like this:
DHCP off
Wirless all
WPA-PSK
TKIP
64bit
I can't connect even to open wifi accespoints(hotspots).
I start the wirelss manager, tap on wirelss on and after that the wireless network appears. I click connect and nothing happens. In the network manager the connectios is available, i click connect, it says connecting and than again it says available.(any hot sopt or the home network, for that at home i entered the mac into the router and have written the ip an dns to the phone wirelss card)
Pleas help, it is a great phone i like it but this is the only problem i have.
PS: I even commanded an bluetooth gps unit. Is there any way to change the hardware and install an "g" wireless card?
Shouldn't DHCP on your WiFi router be set to 'On' and also for the phone as well. It will select an IP address for your device, which will then pick it up.
Otherwise you will have to allocate an IP address on the router, and then set the phone to the same address. If they don't match it won't work
It's a lot easier to let DHCP do all the donkey work. In most public areas DHCP is used as it is a 'Start it and forget it' system.
I set dhcp off because i assign an ip adress to every pc manualy and even have an mac filter where again the ip is written. I set the same ip on the phone as i had written it in the router config.
I can't acces even public wireless spots. I have the problem that it says the connection is available and then it says connecting and instead of connected it says avaialble.
when I set static IP, my device cannot access internet, I tried it on more roms and result is the same I have set mac to ip bind (to ensure IP is not assigned to another device) on my router and it still does not work..I want static IP as it reduces wlan wakelocks
it is not router problem as on my tablet internet is working with static ip
441Excelsior said:
when I set static IP, my device cannot access internet, I tried it on more roms and result is the same I have set mac to ip bind (to ensure IP is not assigned to another device) on my router and it still does not work..I want static IP as it reduces wlan wakelocks
it is not router problem as on my tablet internet is working with static ip
Click to expand...
Click to collapse
What router do you have, how is you netwprk configured, did you set the right gateway and subnet mask in the device?
Jann F said:
What router do you have, how is you netwprk configured, did you set the right gateway and subnet mask in the device?
Click to expand...
Click to collapse
linksys WRT54GH
gateway is 192.168.1.1 and mask is /24 (255.255.255.0)
in phone static IP settings everything is configured correcty but no internet access
what says ipconfig in terminal emulator?
and what encryption and band do you use?
441Excelsior said:
linksys WRT54GH
gateway is 192.168.1.1 and mask is /24 (255.255.255.0)
in phone static IP settings everything is configured correcty but no internet access
Click to expand...
Click to collapse
Try setting it then restarting the router.
Edit - posting this with static IP. Are u using a repeater?
TakeYourTime
#Fear said:
Are u using a repeater?
Click to expand...
Click to collapse
no
Strange not sure why it won't work for u. Anyway I didn't fiddle with the phone setting, I set the static dhcp on the router. Rebooted the router, got the static assign ip.
Cheers
TakeYourTime
I'll try it in work on wifi to see if its problem of my network
I flashed desire xs rom and static ip now has internet access, but on sense 3.6 roms it does not work (tried blackout, ice cream saga and stock)
Hi,
I am working on a project and i need a local private network to do some testing for WiFi. I am trying to connect to a Router which is not having the DHCP server .I have manually changed the settings of Router. Since the DHCP server is not running in the Router, the DHCP client will not be able get the IP address . As I know, if there is no DHCP server in the network the DHCP client should assign an Auto IP in the series 169.254.xx.xx according to the Zeroconf logic. But this is not working. The DHCP client is getting timed out and connection is getting reset. I am using the DHCP client version 5.2.10 from Roy Marples.
Does this DHCP client support the Zeroconf? If DHCP client supports, how to enable the Auto IP ?