Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
Hi, I'm new on this forum and I've allready read a lot of interesting things.
Can somedy help about the following?
1. I've dowloaded the PHMregedit.msi, I've run it but nothing happend; in the pc I have a new folder but in the ppc there is nothing new. What have I to do to use it?
2. Can somebody help me about hoe to see the EXTENDROM?
Regard.
qteq s100
rom 1.06.04 ita
radio 1.05.00
extrom 1.06.119 ita
Your rom looks quite old. You might want to consider upgrading it.
Extended rom can, I think, be accessed using gsfinder.
To install software on the pocketpc, download something called cabinst and then get hold of .cab files. these can be installed directly by the PocketPC - just double click on them with gsfinder.
Extended ROM is a waste anyway! Use big storage and use that space
V
New German HTC Magician/MDA Compact rom have been uploaded to Magician section on FTP.
ftp://xda:[email protected]/Magician/Shipped_ROMS/
Enjoy
Does anyone have access to windowsmobile.it?
http://www.windowsmobile.it/
05.010.2005
Available new ROM for Qtek S100
E' available in the area of download upgrade of the device new ROM for the Qtek S100. optimizes the operation of the Bluetooth of the camera and installs one new version of client the MMS. has been dawns to you, moreover, the driver of the panel touch screen and has been improved the translation of the error messages. The possessory ones of the Qtek S100 can unload the modernization after to have carried out the authentication from
___________________________________________________________
Can someone check qtek.nl for new ROM also?
Moved the files in the "Fixed" part of the ftp.....
Where have you found this ROM? A short look at the t-mobile page didn't show any news about this ROM.....
Have you noticed any improvements of the ROM?
By the way:
Do you now a way to mount the Extended ROM -File under linux?
Stefan
You can cut header from decrypted ms_.nbf file and mount it as disk image.
http://www.t-mobile.de/business/blackberry/software/1,7968,11445-_,00.html
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
calvinandhobbes said:
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
Click to expand...
Click to collapse
But the issue here is Blackberry. This isn't a ROM upgrade, is it???
This is a ROM update package.
Any ideas what actually happens to the rom?
Extrom looks to me like blueberry is integrated; seems to be settings for austria though. Confirmations on that?
Greetings
i just installed the new rom... works fine so far... but i'm missing something.
if a gprs connection is established, than there is no disconnect button... is there a trick to get this button back?
@tko
to sort out that problem i once found the following :
Orange_GPRS_Desconnect.sa
It`s a .cab file, once installed the disconnect works fine again!
Greetings
download here:
nice thax
This ROM upgrade works fine for me too. But I haven't installed anything from the Ext_ROM yet (on purpose).
works also quite nicely on my device, i only installed the new Camera Program from the Ext Rom, nothin' else.
BigStorage
Anybody tried to apply the BigStorage Hack with this BB-Update ?
Cheers
hrb
@hrb: You're probably unable to read... so no further sense in making it any clearer for you WITH WORDS.
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Custom ROM for Tornado - Vista ROM for C600,V14
Pictures & details http://www.cnsmartphone.com/29170/viewspace-2335.html
download link: ftp://ftp.pkzn.com/Smartphone/Vista_ROM_(OS.nbf)_for_C600_V14.rar
This rom is in chinese, to change in english Start-Settings(see icon)-press 0(More), press 2(Regional Settings) - press joystick, choose UK English, restart
Applications deleted:
- all games
- java
Some application are in chinese and cannot be changed in english (CeleTask,SimMan,WM5torage)
I wonder how can i edit/create a .nbf rom (from standard rom) like this one. Anyone can help me?
BTW works fine on my C600
Hi, could you please tell me how to install this rom? i am a newbie with the cingular 2125... thanks in advanced
well is simple
Download Vista Rom, unzip it, connect your mobile to your pc (via ActiveSync), you will find in unziped Vista Rom folder a file named ROMUpdateUtility, open it and follow the steps.Is very simple
But first is recomanded to backup your device, see "The Doctor" post(s) here: http://www.modaco.com/index.php?showtopic=245662
good luck
I'm using this ROM. The joystick is better with this ROM as it was not with some others. Font is also pretty for displaying Chinese character.
No wifi
I liked this Rom until I discovered that there is no wifi control! Is it just me or is this really missing? Back to the I-Mate rom for my SP5.
What is the camera like on this rom?
Is it the same as the iphone rom?
@Lemark yes indeed joystick is better, joystick driver is the one form Orange UK AKU 2.0 i think.
bogy16 - Any chance you could upload this rom to one of the upload sites like yousendit or megaupload please?
I've tried to download it from the link and using an ftp client but I can only get about 2mb before it kicks me off!
OK,after lots of hassle and terminally slow download speeds,I've finally grabbed it.
If anybody else wants this rom
http://www2.flyupload.com/dl.php?fid=6547704
It is a pity...
GreatRom, but there is no wifi . Joystick is better but craze,ikone is beeeeeeeeeeeeeeest .Its too bad ,but must comeback to oder official ROM.
Verily,verily pity...
i don`t need wi-fi, my device does not have the hardware piece so...
Try this to show the WIFI on the Comm Manager...
Use a Registry Editor
HKLM - Software - HTC - CommManager
If there are 6 keys present..
Add a key named 7
Under the 7 key
Create a string named - Default
Value Data is - WLAN
Go to HKLM - Software - HTC - SupportedFunctions - just add 1 to current Value Data..if it's 6 then make it 7.
Wait for half a minute then reboot
You guys have to put NetCompactFrameWork into Storage Card/Program Files/NETcompactFramework/. It is provided by the Cooker in the original ROM as a separate bundle.
Oh sorry I don't know if the guy provided NTFC bundle in the package.
Is french is aviable on this rom ?
no language french is not available, only english and chinese. meabe you can put it yourself, i don`t know
TaskManager Missing
Nice ROM. It would have been nice if it came with java though.
I installed the T9 language pack from the iPhone thread. Makes typing much easier
u can download it here
http://download.mobilnaut.cz/?id=73&akce=down
I have the Cingular 2125.
Is it possible to copy the taskmanager app from the faraday rom to this rom, 'cause I cant find the task manager.
After you load a few apps things start running very slow. Have to soft reset to clear the memory.