i dont know if my sandisk wi-fi card is broken or not, since i bought it, i never use it, because when i plug into my 2003se, the device doesnt respond it, now i'm migrate to wm2005, i wanna try it again, please help me.. does any driver required to be install on wm5 device?
SANDISK WI-FLCARD
Of course, you must install the SanDisk Wi-Fi Card Driver.
It runs fine.
You download it from SanDisk web site.
Related
just wondering if anyone can tell me the best wireless sd card to use with my Qtek.
if it's a qtek1010 (xda1) then you cant use any of them
since they all require sdIO and the xda1 dont support that
Hi its a Qtek 2020 ( xda2 )
I'm using a Socket WiFi SD Card and works great! :wink:
Im using a sandisk SD WIFI card works great with WEP as well.
I have the Sandisk SD card too... but apparently it does me some problems... i have to push the card a little bit with my finger to the forward, so that i'll be able to use my wifi... not very usefull to surf on the internet like that...
i ve read elsewhere some other ppl had same problem...
Hi, I am new to the PDA world. I have downloaded the sdhc.cab and installed on my AT&T Treo 750, WM5, it identified a 4GB Kingston Mini SDHC memory card. It works great.
But I can no longer see memory card (Treo reports no memory installed) once after turning on phone from sleep mode or the display gets off. Only way to get it identified is to un-plug and re-plug SDHC card into the slot. Is there any fix for this. Please help me.
Thanks
teleguru said:
Hi, I am new to the PDA world. I have downloaded the sdhc.cab and installed on my AT&T Treo 750, WM5, it identified a 4GB Kingston Mini SDHC memory card. It works great.
But I can no longer see memory card (Treo reports no memory installed) once after turning on phone from sleep mode or the display gets off. Only way to get it identified is to un-plug and re-plug SDHC card into the slot. Is there any fix for this. Please help me.
Thanks
Click to expand...
Click to collapse
Upgrade to ATT WM6 2.25 and enjoy.
Thank you reyjabs.
i need a software that can format my qtek 9100 memory card as there is no option on my ppc that offers to or allows me to format it. so pleaze let me know.
get the sdformatter from panasonic. It works perfectly and properly. Since you have an HTC Wizard, Make sure to format it in either FAT12 if 512mb or under or FAT16 if over 512mb. This is the proper formatting per the specifications.
Also, please make sure that you do NOT have an SDHC card. If you do, please return it, and buy a regular SD card.
gehzumteufel said:
get the sdformatter from panasonic. It works perfectly and properly. Since you have an HTC Wizard, Make sure to format it in either FAT12 if 512mb or under or FAT16 if over 512mb. This is the proper formatting per the specifications.
Also, please make sure that you do NOT have an SDHC card. If you do, please return it, and buy a regular SD card.
Click to expand...
Click to collapse
can i install this software on my qtek 9100 or is it for my pc?
It is for your PC. There is a formatter around somewhere that will run on the PPC, but I don't remember the name of it. It was included in a rom I ran long ago.
maaaan, well if u do remember it or so then please drop me a line a'ight.
I don't know of any PPC app that can format a card (never needed one), but if your problem is that you don't have a card reader then you can run WM5Storage on your phone. It'll make your card look like it was a USB flash drive when you connect the phone to your computer via USB, instead of running ActiveSync.
This makes your phone act as a card reader and you can format the card as a usual drive (on Win, you need to right-click the drive in My Computer and there's formatting option there).
Not exactly what you wanted, but might help.
al3d said:
I don't know of any PPC app that can format a card (never needed one), but if your problem is that you don't have a card reader then you can run WM5Storage on your phone. It'll make your card look like it was a USB flash drive when you connect the phone to your computer via USB, instead of running ActiveSync.
This makes your phone act as a card reader and you can format the card as a usual drive (on Win, you need to right-click the drive in My Computer and there's formatting option there).
Not exactly what you wanted, but might help.
Click to expand...
Click to collapse
Oh nice! I had never used WM5Storage, even though it has been included on many of the roms I have run over the 2 years I have had my phone. Good to know!
al3d said:
I don't know of any PPC app that can format a card (never needed one), but if your problem is that you don't have a card reader then you can run WM5Storage on your phone. It'll make your card look like it was a USB flash drive when you connect the phone to your computer via USB, instead of running ActiveSync.
This makes your phone act as a card reader and you can format the card as a usual drive (on Win, you need to right-click the drive in My Computer and there's formatting option there).
Not exactly what you wanted, but might help.
Click to expand...
Click to collapse
Thanks for the Info i am updated today as well regarding WM5Storage. Appreciated.
try pocket mechanic - it has a format card option on it
The 16 GB Micro SD on the X7510...does it work ???
If yes, any comment as to speed especially on watching videos and playing music. I have my X7510 setup that all my necessary files and programs were installed in my Flash Disk, so the only thing that is going in the Micro SD card is music and videos.
It is also cheap now... at Amazon it only cost 63 USD.
cktlcmd said:
The 16 GB Micro SD on the X7510...does it work ???
If yes, any comment as to speed especially on watching videos and playing music. I have my X7510 setup that all my necessary files and programs were installed in my Flash Disk, so the only thing that is going in the Micro SD card is music and videos.
It is also cheap now... at Amazon it only cost 63 USD.
Click to expand...
Click to collapse
I have had some troubles with Sandisk 16 micro SDHC (via a converter to mini, of course), purchased about a month ago. After two weeks of joy it just decided to disappear all files on it. Yesterday I have got a replacement, will see what happens.
The user manual say SD card, not going into details, so SDHC may be a problem, although SDHC for X7510 is mentioned most everywhere else.
If you got some hard facts, pls. let me know too, and vice versa.
Cheers.
Newbie11 said:
I have had some troubles with Sandisk 16 micro SDHC (via a converter to mini, of course), purchased about a month ago. After two weeks of joy it just decided to disappear all files on it. Yesterday I have got a replacement, will see what happens.
The user manual say SD card, not going into details, so SDHC may be a problem, although SDHC for X7510 is mentioned most everywhere else.
If you got some hard facts, pls. let me know too, and vice versa.
Cheers.
Click to expand...
Click to collapse
Thanks for the update. I will be purchasing one soon.
Do you use WM5torage? Because on my X7510, that software does not work properly. Does not matter what version I use. It might be the culprit on yours.
cktlcmd said:
Do you use WM5torage? Because on my X7510, that software does not work properly. Does not matter what version I use. It might be the culprit on yours.
Click to expand...
Click to collapse
Nope, I use either the regular ActiveSynch or connect using that second option
(settings/connections/USB to PC/ Disk Drive). I am quite unhappy with both, in fact - the first is too slow and fails unpredictably when large volume are copied, the second shows only the Flash Disk and tends to mess up the HTC when you disconnect.
So I have decided today to try out the nueMassStorage:
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Anything to be aware of re the SDHC card?
Newbie11 said:
Nope, I use either the regular ActiveSynch or connect using that second option
(settings/connections/USB to PC/ Disk Drive). I am quite unhappy with both, in fact - the first is too slow and fails unpredictably when large volume are copied, the second shows only the Flash Disk and tends to mess up the HTC when you disconnect.
So I have decided today to try out the nueMassStorage:
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
Anything to be aware of re the SDHC card?
Click to expand...
Click to collapse
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Hi all,
I use my X7510 since a few weeks with a 16GB MicroSD with MiniSD adaptor.
I use it everyday with iGO 8 navigator installed from the SD card and I have no problems.
I'm waiting feedbacks about nueMassStorage also to see if we can have direct access to SD card from the PC.
cktlcmd said:
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Click to expand...
Click to collapse
Thanks for the tips. Re SOFTICK CARD EXPORT: I have used it with my now defunct TREO 650, and it is not very speedy. So I shall skip it for now.
About the formatting of the card: in any case when I have tried to format it (straight from the shop) on X7510, formatting was prevented for some mysterious reason, so I can't do it in any case.
nueMassStorage is a cool one. It created a second "USB to PC" icon, identical to the original one, in the Settings/Connections (well, I wish it were a bit different, but it's not a big deal).
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
So for small files I can use the regular synch, and for big ones - nueMassStorage. It means that if I need to load a big file to the flash disk, I'll have to copy it first to the storage card and then move it to the final destination. Not very convenient, but better than nothing.
cktlcmd said:
Let us know how the nueMassStorage application works on your X7510.
From my experience with my SDHC card, NEVER format it using your computer. Use a compatible card reader or if ever you get WM5torage to work properly, use that with the micro SDHC card in the X7510.
There is another option, SOFTICK CARD EXPORT: http://www.softick.com/pocket-pc/cardexport2/
It's not free though.
Click to expand...
Click to collapse
Thanks for the tips. Re SOFTICK CARD EXPORT: I have used it with my now defunct TREO 650, and it is not very speedy. So I shall skip it for now.
About the formatting of the card: in any case when I have tried to format it (straight from the shop) on X7510, formatting was prevented for some mysterious reason, so I can't do it in any case.
nueMassStorage is a cool one. It created a second "USB to PC" icon, identical to the original one, in the Settings/Connections (well, I wish it were a bit different, but it's not a big deal).
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
So for small files I can use the regular synch, and for big ones - nueMassStorage. It means that if I need to load a big file to the flash disk, I'll have to copy it first to the storage card and then move it to the final destination. Not very convenient, but better than nothing.
Newbie11 said:
It connects only to the storage card, which was a surprise, otherwise it works perfectly well and when disconnected doesn't cause any hiccups on HTC side.
Another small issue - there was supposed to be a popup that is triggered when you connect the synch cable, but it doesn't work so far.
Click to expand...
Click to collapse
It connects only to the Flash Disk for me, although the first time I ran it, it connected to my 16 GB Storage Card; after that, it always shows the flash disk.
You can find the Pop Up if you look in the Windows folder and look for nueStoragePopUp.exe file. You can create a shortcut under Windows/Start Menu/Programs/"to whatever folder you want".
After that you can ran the shortcut and a Pop Up Notification will appear with 3 options.
UPDATE: The Sandisk 16 GB Micro SDHC on a Mini Sandisk Adaptor works great. I love it.
Thanks for the tip - created a pop-up in the Resco Today Plugin, it works as prescribed. Still shows only the storage card, though.
I guess it is decided on the dice throw ;-)
Happy New Year!
I just got a new 16 gb miro sdhc by sandisk. i also am using it in my htc touch pro form verizon which says it will support up to 16gb chips. but every time i try to put a movie on my card through usb into the phone, i get a i/o error. It also happens when i put music on there some times. What do i need to do to get this to work?
Have you tried it with a card reader already?
ReaperBoy said:
I just got a new 16 gb miro sdhc by sandisk. i also am using it in my htc touch pro form verizon which says it will support up to 16gb chips. but every time i try to put a movie on my card through usb into the phone, i get a i/o error. It also happens when i put music on there some times. What do i need to do to get this to work?
Click to expand...
Click to collapse
Hmmm...officially your phone is supposed to support upto 32GB. What does the error message read again? How are you trying to transfer media from your desktop to your phone? What happens if you were to pop your memory card onto your computer and directly put stuff onto it?
I got the same error on my new card today as well. However, if I transfer directly from PC into the phone via activesync, the phone recognizes the card and works ok. It is only when trying to transfer from the PC to the card via a card reader that it does not work and gives the error. I suspect that the adapter I have is for a MicroSD card, not a MicroSDHC, and that might be what is causing the error, or that the card reader built into my computer cannot work with the SDHC format, only the normal low density format. Of course, this is just a guess, since I can transfer via activesync all is OK.