I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz
hello I briqué my qtek s200 after having wanted to pass from fantastic V1.0 to the version 2.0ac2 how I can repair this problem when I light my ppc there remains blocked on page QTEK keep the world in one I is necessary a fast solution in advance for me THANK YOU
just go bootloader mode then flash again.
qtek s200 is not dead
hello I wanted right statement that I found how to repair my qtek S200 it was enough to return in the bootloader while pressing on the button power and the photo button to be able in trer in the bootloader and thus to restore a connection usb with the PC and the qtek thank you louse to have to help me has to solve this problem however simple has to solve I hope to help of other people in the same situation only me with the pleasure
i just upgrade my dopod 818pro rom...after finish upgrade my dopod stuck at dopod bootable screen..so i do hard reset.but still same.but now my dopod not function at all.plz someone help me?
ayien said:
i just upgrade my dopod 818pro rom...after finish upgrade my dopod stuck at dopod bootable screen..so i do hard reset.but still same.but now my dopod not function at all.plz someone help me?
Click to expand...
Click to collapse
Hold Camera button, and reset. keep holding the camera button, and you will get to bootloader. just connect your phone to the computer and downgrade your phone to an original aku 2.2 rom. if you didn't understand what i said ,read the forum. there are so many people asked this question before.
good luck
i also do that..
i also do that after my dopod stuck at dopod screen...after that my dopod not function.nothing happen.i try to charges,also nothing happen...plz....
Hi everyone,
My qtek s200 dont boot, i just try hardreset, update rom in bootloader but nothing result..
Qtek stays in operator logo
IPL 2.10.0001
SPL 2.10.0001
GSM 02.69.21
OS 4.0.0.0
This happens because i was trying update rom to os 4.0.0.4 and there was a error during de instalation.
Then i try connecting again with activesync 4.5 but there was no conection.
now the qtek dont boot to operating system
Help me please.....
downgrade to wm5,upgrade to wm6,everything should work fine.
wich file?
how can i downgrade to wm5 without activesync?
by bootloader?
Wich file and where i find?
Thanks for your help!!
finally i ugprade to prophet 2.20.7.34 and my s200 is alive again...
Thanks....
How? Same problem here
same problem
i have tried again again end again, and now it's ok
note :
at the end of step 1, when s200 said "tap on screen" -> i have taped
after i have start step 2 as indicated in the tutorial
Good afternoon,
first you must conect pu s200 in bootloader mode (press camera button and make reset with your sylus pen- screen must appear three colors) then plug usb cable, then run the upgrade/downgrade rom
In the end the qtek reboot, install de apps and you must make software reset
Bye
Ratzumen
I have the same problem here. I had the wm6 rom on my qtek s200, but my headset worked not fine with it. So i tried to downgrade to the aku 3 rom for my s200. It seems ok. But when i turned the pda on, id didn't go further that the qtek boot screen. I also could not get to the bootloader screen to update another rom. What can i do?
Hi Guys,
i try this file from forum to upgrade my S200 however after restart my PDA its not working at all on my PDA not working.
can any one tell me how make it back to normal?
wm6wwerus17217v2.rar