Hello,
How can i upgrade my S200 to the last ROM (
ftp://xdaupload:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe)
Does anyone have a tutorial?!
Do you need it? Here it is:
1. Dounload the EXE file
2. connect PDA with ActiveSync
3. Run EXE file
4. Follow the screens
Pay attantion to the next: you will lost all the information exept of SD card content. If you complete backup your system and restore after update - it will lead to system unstability and errors. The best way is to reinstall al your software after upgrade and the to restore application data only.
I've changed the original Qtek s200 rom to a Dopod rom.
Is possible to downgrade to the original Qtek Rom?
i have the same problem. i used the dopod rom and now i cant install s200 rom. say can't update this nbf. find a newer one bla bla bla.
Related
Hi all!
I've an Italian version on i-mate Jam and I'd like to install the last English version of the ROM.
I'm trying with the wwe (worldwide English) ROM but seems to doesn't work with my device...
S.O.S!!! Smile
Hello
There are numerous posts on this problem.
Quick extract on the matter from JoelWu as you may get Error 150 Codes
1. Right click on the downloaded Rom EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.
Many thanks!
I'll try it asap!
Last questions:
if I install the WWE ROM as you told me... the next ROM upgrade it will be possible by the normal exe way or all the WWE ROM need that workaround?
If I install the WWE ROM using the way you told me... Can I came back to install the Italian version of the ROM? Using the normal way (.exe) or... ?
I dont no.. im trying 2 update my Magician for the second time i will post my result first i try with official .exe. if it dont works i use the cracked...
Nope still Country ID error
Thanks!
IT WORKS!!!! :wink:
well... now I've got English ROM on my jam but 2 problems:
- On my old Italian ROM there was an antivirus application installed as default. On English ROM there isn't!!! :-(
Any suggestion to download the antivirus? Is it necessary in your opinion?
- Now, when I'm typing with the std keyboard the Jam suggest me the English words... (obviusly!)
Can I configure the Jam to sugget me the Italian words or the WWE have only English vocabolary inside?
- Wat's the differences fro WWE ROM and US ROM or UK ROM? I'm Italian... waht's the best English ROM for me?
WWE is fine for you. The US and UK roms only have settings for that countries' phone providers in the Extended Rom. Since you're not in either of those countries you can just stick with WWE.
I need help to upgrade qtek 9000. I had bought this pda three days ago. There is installed the german version of windows mobile 5.0 . How can i change the rom to have a english version? Cause i try to use the JasJAr WWE 11353 version of the Rom, but the program stop itself and write that the version of the rom is not correct. Where i can found the correct version for my qtek? Many thanks
Country id error
The software told me that there is a country id error 120 . Anyone can tell me how can do about it? Thank you
Try this ROM:
ftp://xda:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Rom didn't work
I'm sorry. This is the procedure that i have follow:
1. Download the qtek rom
2. Unpack in a directory
3. Substitute upgrade.exe with NO_upgrade...
4. The utily start correct
5. The screen of qtek become black
6. Windows pop-up a "modem usb installation"
7. The update program say: country id error 120
That's all. Please help me!
Hi All,
I've successfully upgraded my O2 XDA II to WM5 1.65b.96WWE. Now I have
14MB Storage
88.33MB Program
31.96 Storage Card - Storage
The 14MB Storage is easy to fill up. Searching for the posts, I find that the ExtROM can be used to increase 14MB Storage. Is it true? Will it affect the Radio ROM?
I download the ExtROMUnlocker(for_WM2005_only).cab. Install it, run the ExtROM Unhide -> OK, then ExtROM Unlock -> Fails.
The ExtROM Unlock gives the error "The file 'unlockextrom' cannot be opened. Either it is not signed with a trusted certificiate, or one of its components cannot be found. You might need to reinstall or restore this file."
I tried to re-install but I get no luck. Would somebody help me please?
Regards,
kwy
Go to www.buzzdev.net and search the forums for the "DoC tool". this can be used to release the extra memory for use.
Mouldy
I found problem like you but i can try upgrade version to WM5 2.00a 96WWE and i run ExtRom Unlock, it's OK.
hi
I'm a newbie to PocketPC, I just bought an used PocketPC from my friend.
It's a T-mobile MDA Compact with O2 mini traditional chinese firmware. All the menu, everything is in chinese. The problem is...i can't really read chinese.
It maybe a dumb question! But i just wonder can any PPC experts here show me "Step by Step" how to flash it to an English ROM?
thanks everyone very very much!!
Cora. ^^
1. Download any Magician WWE ROM (latest is ver 1.13) and the file MaUpgradeUt_noID.exe from this board's ftp.
2. Extract the zip file and copy MaUpgradeUt_noID.exe to the same folder where you extracted the ROM.
3. Disable the USB connection in ActiveSync.
4. Put you MDA in bootloader mode (press power+camera+resest at the same time.
4. Plug in your MDA to the USB cable.
5. Double click on the file MaUpgradeUt_noID.
I have followed the steps... After run the "MaUpgradeUt_noID.exe", and click "NEXT"... then.. It says "Checking the information on your device... Please wait... " i have waited over 10mins, but still nothing happened. Wonder is there anything i have done wrong?? thx
Cora.
FINALLY... it's working!!
THX THX everyone!!
CORA.
What shall I do if on stage 2 it always stops on 24%....and nothing happens?
Hi all,
I have recently bought a Kaiser from Orange in The Netherlands. The phone had a Dutch OS installed and since I am Dutch illiterate, I HardSPLed my device and loaded the Kaiser release ROM that I found in this thread: http://forum.xda-developers.com/showthread.php?t=331900
The problem is that, when I tried to install TT6 found here: http://rapidshare.com/files/56585274/6_032_8351.rar (the link was found in the Kaiser Wiki), I get this error message:
"Unable to install Application. Please update your device ROM to the required version before trying again"
Needless to say I am completely lost...
Please advise, and if possible, point me to a newer English ROM that might solve this problem.
Thanks in advance....
That cab you have, is the tomtom installation cab that is shiped with certain htc phones. On other devices/roms it doesn't run, because the cab checks if the appropriate rom is loaded.
Try find another CAB. There are some cabs where the check is removed.
You can also extract the cab with WinCE CAB Manager and copy the files manually to your device.
Thanks Krypt!
It worked.
Cheers