Related
hi,
i resently bought a heaset sagem BT sh1, (BT stereo headphone) and tryed to use them on my universal originaly with the 02 uk latest vanila rom, but it didn't reconised the headphone as such only headset, so i search on the forum and find that it was because of the missing A2Dp stuuf, so i upgraded and flashed the rom to WM6 wich resolved some of the problem but not totaly,
The headset work not problem to Lisen phone call and stuff, i can even lisen to the sound of the universal ok, screen tap and so one,
but when i start media player to lisen music, it does work for 4 second and then it stop, it doesn't shutter, it just stop, and work again for 4 second only if i close mediaplayer, and it work again for 4 second, i try the reg hack but didn't change anything, i try the a2dp upgrade as well no success,
i try other player no success, what get me is the fact that i cannot lisen any sound that are longer than a few second,
can anyone help me,
thanks a lot
ps i did pass almost all day looking for a solution on my own, without result.
my rom of my universal is Jwrightmcps Crossbow ROM Update 2.02.00 WWE
the O2 XDA Exec WWE Download to be exact.
If you hold it close, does it still happen?
dewild1 said:
If you hold it close, does it still happen?
Click to expand...
Click to collapse
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
A2DP
Sigiel said:
yes it still happen, when i installed it and tested the phone was in my hand and the headphone on my head no more than 60 cm, i do have also a magician and it work perfect with it (i installed the bt stact o2 mini patch) so no problem from the headset, i also have the alpin and i will try to see if it work as well tomorow i to lasy now.
Click to expand...
Click to collapse
Hi!
Using "Resco Registry" or another registry editor program, find the following key:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
add new DWORD:
Priority256 with value 250 (decimal)
This should solve any lag problems. But to get hi-quality sound, you also need to tweak parameters here:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings
These are the values that result in the best possible sound:
UseJointStereo = 0
BitPool = 58
MaxSupportedBitPool = 60
MinSupportedBitPool = 30
Good luck
WBR, Draco.
hey thanks for the tips but it didn't work, the probleme isn't that i have lag, but that i simply have no sound that is longer than a few second. exept on headset phone mode, and the quality is very good anyway, after i did that reg hack it was even worse, (no offance intended) no i can't have any sound longer than one sec, and in the registery under HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2 DP\Settings
i didn't have any settings, not one. can it be sommthing missing in my wM6 rom ?
Hi,
I have a similar problem using Helmi WM6 rom...I have been using itech bluetooth headset for almost a year now without problems, after switching to WM6, each time my phone rings, i have to press once to connect the bluetooth to the phone and another time to answer,,,It was fine with the WM5 roms..any ideas?
Cheers!
Hi,
I am using O2 xda mini s, and i just bought a sony ericson HBH-DS970 stereo bluetooth earphones.
I am using WM6 Xplorer Rom and radio version 02.25.11.
Currently I am a bit frustrated with my bluetooth earphone as the quality is very poor eventhough I read that the quality of the sound if used with other bluetooth handphone / pocket PC is superb.
I have ben searching this forum to either tweaks the registry or any patch to improve the sound but currently I'm still lost. I found one old post (WM5) which guide us to tweaks -> HKLM/software/microsoft/bluetooth/a2dp/settings....
but my problem is that there is no settings folder under my a2dp, there are 4 folder with label 1,2,3,4.
Are there any way i can improve the sound quality???
will changing the radio rom affect the quality of bluetooth reception??
Please enlighten me..
Thanks
http://forum.xda-developers.com/showthread.php?t=297762&page=100
Try the settings from cduncan...
If there is no registry entry, you will have to manually put them.
You can change the bitpool setting for quality of music.
HTH
Cheers Sids,
I have already do as you said... previously went to that post but feel lost, and since the thread have over 100 pages, therefore i feel inappropriate to ask you or duncan.
One more thing though, can i ask you what is your personal preference on those settings?? I cant put a lot of bass, because it will sound terrible, like broken speaker.. what todo??
cheers mate
p/s My problem is that the quality of the sound that coming out of my BT earphone is just poor (although others are highly recommending this DS970). I have no problem with pairing it with my wizard or the playback.
I have play around with the BitPool and the only difference that I notice was the volume level, not the sound quality. any advice??
One more thing, is the selection of Radio Rom have any effect to the quality of the bluetooth signal i.e. to the output in my BT earphone??? Help...
Thanks again
Hi,
I cant say about your BT headsets. But I confirmed these things - Updated firmware from the manufacturer (Jabra for me) and the quality with other A2DP enabled (maybe nokia/SE) phone.
I have set my bitpool setting to 60 which is Farias default, but he placed the reg entry in AD2P folder instead of A2DP by mistake.
I am using equalizer settings with TCPMP for the nice sound, which I dont get with Windows Media Player. Maybe you could try that out.
Even after those settings and tweakings, I dont think BT headsets can replace wired headsets for an audiophile. You will only just get passable sound quality. Maybe its got to do with bandwidth that BT provides.
Lastly, I may be wrong, but Radio roms are only used for GSM radio. Its got nothing to do with BT.
Gurus, please correct me if I am wrong anywhere.
Sid
I'm using faria ROM Real Thing and using Oakley OROKR as my bluetooth stereo. But I have unusual problem. When I listen MP3 from pocket music 4.3.4 my OROKR produced a lag sound. Sometimes the sound was disapeared and suddenly back to normal again (with lag of course). I have try my OROKR with my PALM Treo 650 using A2DP s/w it's produced same quality like my MDA. Is this happen cause the registry setting or my OROKR problem? Help me?
PS: If I used OROKR to call it's 100% normal
For what it's worth, i have tested my plantronics pulsar 590a (bt ver2) with other htc devices with bluetooth ver 2 and audio was excellent. the wizard only has bt ver 1.2 and that is maybe where sound quality is lost. just a thought...
did you buy the headphones on ebay? Got mine on ebay and I was very disappointed with the sound quality. i checked online and, for my surprised, i discovered that what I got from ebay was a cheap fake. I bought a new set from sony shop and voila, they work perfect. Sound is amazing..with the SE k800i i am using from time to time. Couldnt get them to worjk with my xda2i tho
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Hi. First of all thanks for this wonderfull and usefull site !!! The BEST !!!! I have a problem that I can't solve without guru's help. I have 3 HTC pocket pc, a TytnII, a Touch Diamond and a Touch Pro. All of them uses original WM6.1 Italian rom.
The Touch Pro (Raphael/P7272) and TytnII have installed Cyberon Voice Dial 1.2, that works via tags. I have intalled on the Touch Pro the Cyberon Voice Commander 2.5.1 software and all works fine without bluetooth headset. When I switch on bluetooth headset and I press the headset button, Voice Commander start and I can hear the "Say command" prompt in the headset speaker, followed by the "beep" that start the timer to talk. And then... the problem: headset microphone does't trasmit audio stream to the ppc !!! The program wait for the command, but the mic seems to be OFF. I have installed the same software on the TytnII and all works fine also with the same headset. Now... Where is the problem? I think that the problem can be in a registry setting but all seem to be right... Than I think the problem may be in Audio Gateway dll, OEMAGW, or in the bt driver, btavdp... I have extract the dll from the TytnII rom and I have used disassembler to view unknow registry entry access... I have also try to use TytnII dll on the Touch Pro without success... I need help...
Questions:
1) Any ideas ???
2) Is there a kind of registry monitor that can trace audio driver registry access ?
3) Is there a registry setting that enable debug log for bluetooth driver ?
4) Where I can found a list of AT Bluetooth command ?
5) Last choise... Is there a cocked ita rom for the touch pro that already use CVC 2.5.1?
Thanks to all.
Bye.
Ps: sorry for my poor English...
Hi.
Is there anyone that use Cyberon Voice Commander 2.5.1 on HTC Diamond or HTC Touch Pro with bluetooth mono headset ???
Thanks all.
I cannot find my Plantronics Voyager 855 Bluetooth Stereo headset on my Touch Pro. Can you pair bluetooth devices without problems and if so, what radio are you using?
Hi Zyborg. No, I have no problem with headset connection... Radio version is 1.02.25.19.
Bye
I wonder if someone found a fix for this? I tried voyager 855 and Samsung wep 301, none of them worked ( mic not working ). Bluetooth did pair, but can not even do a sound recording through the BT headset mic. I have also tried almost all the new roms.
Hello, I am quite an avid reader on xda and have gained a lot of knowledge from this forum. Unfortunately I have run into a problem I cannot seem to understand.
I have a Samsung Omnia 7 (T-Mobile, flashed a stock omnia 7 rom,unbranded). Whenever I pair it with my Car audio (I have a Suzuki Alto) the audio drops atleast 5 times a second.
Also the mic voice quality is terrible (people on the other end complain of a lot of static & as if i were speaking from a thousand miles away).
I also happen to have a developer unlock on my phone so this gives me easy access to the xaps.
My Samsung Omnia 7 details are :
OS Version : 7.10.7740.16
Firmware Revision Number : 2424.11.9.2
Hardware Revision Number : 3.15.0.4
Radio Software Version : 2424.11.9.1
Radio Hardware Version : 0.0.0.800
Bootloader Version : 5.9.0.6
Chip SOC Version : 0.36.2.0
I read on the forum about using the Advanced Config tool to set the Bitpool to 51 and set Joint Stereo to 1. But whenever I tried doing that a popup would say "Unable to apply changes"
So I navigated to HKLM\SOFTWARE\MICROSOFT\BLUTETOOTH\A2DP
and I saw ONLY ONE subkey that as Devices that had 4 Subkeys labelled 1,2,3,4 each with a binary value (Address)
I added a key Settings to HKLM\SOFTWARE\MICROSOFT\BLUTETOOTH\A2DP and I added the following values to it:
Bitpool : 51 Dword
MaxSupportedBitpool : 51 Dword
SampleRate : 48000 (this was added by advanced config later when I was trying it out again)
UseJointStereo : 1
I tried testing these settings with my car bluetooth kit but the results were the same. At first I was baffled when I didn't see the key SETTINGS in the HKLM\SOFTWARE\MICROSOFT\BLUTETOOTH\A2DP path.
Is this normal?
Is there any way to fix the choppy extremely low quality bluetooth audio?
(PS I do not want bluetooth over video, also I have set SupportCLI from 0 to 1)
Hi,
Got the same problem.
BT worked in the really early days of my Omnia but since then, I am unable to listen to music on my Motorola S9 headset (even worst than you ! Drops 10 times a second !). Even the call quality when using a mono BT earpiece, sound is distorded and other side does not understand a thing of what I say !!
Sad to say but I really think Omnia 7 are subject to Bluetooth hardware failure.
Really think there is no way and quiet forgot about using BT on my handset. Shame because I was using my S9 all the time with my previous wm device and it was really working very well.
Anyway, if you figure out what's wrong, please, share with me ;-)
Last thing, did you apply some audio tricks through the Samsung diagnosis app ?
Good luck
Thomas
Sent from my OMNIA7 using Board Express
Hi, thanks for replying, I don't think the omnia 7 is subject to BT hardware failures as i've read about several omnia 7s running okay.
Also I did apply the sound trick using the diagnosis app but it messed up the audio on my phone. 30/30 sounded like the speaker is going to explode. Though the changes used to fall back upon restarting, they would come back if I played a song or if I got a call. So I had to re-flash my rom & reupdate it to mango.
I haven't tried BT on any pre-mango version but I guess its going to be the same.
Anyways lets hope Microsoft comes out with a fix in their tango update in Q2
:fingerscrossed:
Really wonder if BT problem may be linked to the sound trick. May sound weird but as I said, Bluetooth was working flawlessly at the beginning and I'm not 100% sure but it may have stopped working the day I messed with Samsung diag on sound settings.
More than that, I wonder at which OS level these settings are managed (even wondering if a hard reset or ROM flashing can roll back the whole thing to the factory settings)
I hesitated to hard reset in hope it will work again but I do not want to lose everything without being sure problem will be solved (and will never know id I don't do it )
Thomas
Sent from my OMNIA7 using Board Express
In my opinion the settings are rooted in the rom, you cannot program the hardware from the rom but only change the settings (this is what i think) anyhow, my BT settings never worked, not before messing with the audio settings in the diagnosis, not after, also what's weird is that the a2dp settings weren't present in the registry, i had to add bitpool, maxbitpool etc. manually (no change even then)
anyways, lets hope someone knows of a workaround or microsoft regards this issue as 'serious'
thanks
EDIT : @NebZoNe I tried your settings and they didn't work for me thanks for the suggestions anyways
adding a registry entry for bluetooth like bitpool should be made in ..\AD2P\Settings
see http://forum.xda-developers.com/showthread.php?t=1351043
try a registry editor instead of schaps' advanced config...better.
max supported bitpool must be 80 (dword)
if you use 51 for bitpool then you can't use jointstereo (set it to 0), or use 53 then you will be able to set 1 for jointstereo...
once you've connected your car's stereo to your device try to find the second tweak i've written (dots between \ are numbers) to make sure the sound will be streamed in stereo (if you setted bitpool at 51 for sure!)
good luck.
Hello, I used the root tools by cliff74 & advanced config to verify the settings. Anyways, I haven't tried bitpool at 53 & will do.
Question : in your post you have said this :
HKLM\Software\Microsoft\Bluetooth\Device\........\ Services\..........(then u should see u're in stereo sound settings)
enabled : Dword = 1
The dots are the numbers, so how do I know what device is which number?
Thanks!
japmeet said:
Hello, I used the root tools by cliff74 & advanced config to verify the settings. Anyways, I haven't tried bitpool at 53 & will do.
Question : in your post you have said this :
HKLM\Software\Microsoft\Bluetooth\Device\........\ Services\..........(then u should see u're in stereo sound settings)
enabled : Dword = 1
The dots are the numbers, so how do I know what device is which number?
Thanks!
Click to expand...
Click to collapse
Do you use so many BT devices that you can't identify them in that path?? i only use bt headphones so i didn't have that kind of problem sorry...
and i'm agree that what you'll find behind \Device\ is straightly linked with what you use...so you must find the string "stereo sound" for every device you connect...as well as you'll find a string value with your bt device name after first connection....
I must insist on the fact that schaps advanced config is screwing with BT's manual reg.edition...and there's no reg lines for samplerate values, they are setted up straight from bitpool level (51:48000; 53:44100; 76:96000)
unfortunately, having a look to other threads, it seems that samsung devices usually know issues with bluetooth function...
well in HKLM\SOFTWARE\Microsoft\A2DP\Devices I have 4 subkeys that are :1 ,2,3,4 each with 0 subkeys and 1 value that is address (a binary value)
In HKLM\SOFTWARE\Microsoft\Bluetooth\Device I have 1 subkey that is 00137b96be74 that has 1 subkey "Services" which has 2 subkeys :
The first subkey has the following contents :
Status (a subkey that is empty)
channel (value : 0 dword)
enabled (value :1 dword)
name (stereo sound)
sdprecord (binary value)
Similarly the other subkey of \Device\ has the same contents except for channel and name
Channel (1)
name (Hands-Free //I suppose this is my car bt audio but when i sync my phone with the car it shows BT Radio as the car's head unit's name)
Also i have logitech free pulse BT headsets and I have the same problem with that
well, seems that's alright i've got the same layout...
the only thing i can do is sharing my ad2p settings layout...
hope for you it's not a hardware issue...
I do not have the default key (not sure if that would make any difference) but anyway, thank you
japmeet said:
I do not have the default key (not sure if that would make any difference) but anyway, thank you
Click to expand...
Click to collapse
Same situation with my omnia 7 - and i have motorola s9 like you. I tried many settings in registry but all of them have absolutely no effect ((
though I shouldn't be bumping but *help?*
As I already told, sorry but I really think the reason is really simple. BT chip on Omnia 7 is defective, this is a hardware failure and I am quiet sure it can not be software solved.
There are plenty of reports on the web with people having the same problem with Omnia 7 :-(
Sent from my OMNIA7 using Board Express
But my motorola s9 worked fine with NODO.
Can we diagnose somehow that it is hardware issue? I have used following codes in Diagnosis:
*#232331# - BT RF Test Mode
*#232332# - BT Audio
*#232333# - BT Search Test
*#232337# - Bluetooth MAC Address
First one tells me that RF testmode is on, second gives me nothing... Third displays Search Failed!!! message and fourth just same code...
On my omnia
*#232331# - RF Test Mode ON!
*#232332# - Nothing
*#232333# - Search Fail!!!
*#232337# - 0x78471D364188
My bluetooth only works well when I put off the wifi on my Omnia 7
Sent from my OMNIA7 using Board Express
I've tried the codes and I have the same results as you have, sigh.
ikke008 said:
My bluetooth only works well when I put off the wifi on my Omnia 7
Click to expand...
Click to collapse
My bluetooth dont work with wifi.
And without wifi sound is choppy.