Related
I am having an absolute FIT with the damn keyboard light on my 750! It gos off after about 5 seconds, and THAT is ridiculous! I was told by a source at Palm there IS a registry entry to fix this, but he could not divulge the info (I did tell him I was open to receiving an anonymous email, but haven't seen it yet!)
Anyone have any ideas? He said it was the same one that worked on the TyTn/Hermes/8525 but I have not found it yet....
Help??
HKEY_CURRENT_USER\ControlPanel\Backlight and key is QKeyLedTimeout. The number of seconds is usually set to default at 10. you can make it any number you like. Mine is set at 20.
I wonder if this also relates to my current issue too - can anyone comment?
The backlight on my Treo 750's keyboard refuses to come on IN USE - however I'm fairly convinced it's not a hardware issue; when performing a soft reset the keypad lights up fine during the boot cycle.
It's as if there's a registry entry that sets the "turn off keypad light after" value to 0 (i.e; always off).
Thoughts?
Cheers,
Steve
Found It in WM5
I traded in my WM6 phone for a Treo 750 with WM5 - wow, everything is where it should be, and the phone works the way it should!
As far as the On-Off issue, Steve, I see that in line in my phone - the key is set to 1, so I would try changing that:
HKEY_CURRENT_USER\ControlPanel\Backlight and key is QKeyOnOff change it from 0 to 1
Let me know - this could be my first crack at helping someone else out!!
I have a question. I can not seem to find the registry edit area for the Treo 750 running WM6. Can you help me in giving me some instructions on getting to this so I can edit the file to keep the keyboard lights on for longer than a few seconds?
on my kaiser it's set to 30 by default.
[email protected] said:
I have a question. I can not seem to find the registry edit area for the Treo 750 running WM6. Can you help me in giving me some instructions on getting to this so I can edit the file to keep the keyboard lights on for longer than a few seconds?
Click to expand...
Click to collapse
Hi there,
There is no default registry editor on WM devices, so you will have to install one if you want to make any changes. You will find a few built into well known commercial apps such as MemMaid and Resco Explorer (I've used both and they work fine on WM6). There may also be some free ones around.
When I lock my Orbit II/Touch Cruise the display is automatically dimmed - standard procedure, I assume. When I come to unlock it, in anything except a darkish room indoors is is very difficult to see the display sufficiently well to type in my unlock code. Is there a way to have the have the display bright when coming out of standby when the lock is on?
Regards,
Bob
this cannot be changed !!! cause configuration comes with rom [email protected] least i guess ---
I use an excellent auto-locking program that can be configured to light the screen for a few seconds to allow you to unlock it.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=386451
Craig
I use throttle lock. Very cool app, and very ligt >>> http://www.throttlelauncher.com/portal/downloads/34-public-releases/65-throttlelock01http://www.throttlelauncher.com/portal/downloads/34-public-releases/65-throttlelock01
Change the Locklevel
Hey Man!
Use eg.the registry editor from schaps and rename LockLevel to LockLevelX
HKCU\ControlPanel\Backlight\LockLevel =>
HKCU\ControlPanel\Backlight\LockLevelX
Reset your device and be happy!
This works fine for me and activating the device happens in full brightness
So far
Frank
Changing the name in the registry works fine. Thanks for the tip!
Thanks for the tips (and the other folk too) - I'll get the registry editor and try that.
Dim backlight on Orbit 2
I take it you're still running the O2 today screen?
Load the HTC.Kaiser.Home.Eng.0409.6Tab.sch Home screen and Slide to Unlock (S2U2-1.05-WM5.cab) and you won't have problems again.
No need to fiddle with your registry or buy a registry editor either.
Search the forum for both the above files but make sure you download and run the specific file above for your Orbit 2 or else the backlight adjust tab won't work.
get the 6.1 update and this is all sorted out in it
Lomcovaks said:
I take it you're still running the O2 today screen?
Load the HTC.Kaiser.Home.Eng.0409.6Tab.sch Home screen and Slide to Unlock (S2U2-1.05-WM5.cab) and you won't have problems again.
Click to expand...
Click to collapse
Is the home screen essential to the process? I use WindowsVistaBlackQVGA and don't want to change it.
chris10230 said:
get the 6.1 update and this is all sorted out in it
Click to expand...
Click to collapse
Running the Windows Update says everything is up to date, so I assume I'm already running 6.1 - I can't see a version number anywhere to confirm. "About" says Windows Mobile 6 Professional and a build number of CE OS 5.2.1623 (Build 18129.0.4.5) If there's another way to update and it would fix the problem that would be the way to go.
Nordlicht277 said:
Hey Man!
Use eg.the registry editor from schaps and rename LockLevel to LockLevelX
HKCU\ControlPanel\Backlight\LockLevel =>
HKCU\ControlPanel\Backlight\LockLevelX
Reset your device and be happy!
This works fine for me and activating the device happens in full brightness
So far
Frank
Click to expand...
Click to collapse
Just to confirm that it is the DIRECTORY name "Locklevel" that needs to be changed, not the Locklevel entry in that directory :-
Name Data
Default (value not set)
Locklevel 0
Perhaps changing the value of Locklevel from zero might have a similar effect?
Folks,
Please post your issues here since the original thread is getting way too big.
Also, please post your fixes for possible minor issues, this will help new users until I update the rom.
Do not post any thing else in this thread besides issue related stuff.
Thanks,
1. When InCall Partial back button is displayed. ---- Posted by KidNamedAlbert
I finally got this one fixed and is working great, I will add this to the next update.
2. Battery meter not showing correctly.
This has been fixed as well and will be included in the next update.
FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your doned flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
Download - HERALD-USPL-beta3
Mirror - by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
Note 3: New mods to theme support in M2DC released today (Sept 30)
FAQ 2
Saving space for updates.
:::ONLY ONE ISSUE:::
When InCall Partial back button is displayed.
EVERYTHING else is easily fixable.
FAQ 3
Saving space for updates.
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Since this thread popped up i guess the issues i have that are notable.
1. activesync always re-opens im aware of a reg change that is possible to stop this but haven't been able to find it yet.
2. that back button when calling is REALLY annoying lol, someone needs to get/find a fix for that.
3. battery bars are inaccurate, i used one of the first things kidnamedalbert suggested and it works, until i soft reset the phone then it doesnt.
4. weather back round was first not alligned correctly, but it fixed itself after an install and uninstall of the feng shui theme.
5. still completely usable and i love this rom a lot
The fix that I have done:
* Using vistahide for battery status. Remove the today screen battery status icon using Schaps advance configurator.
What I can't fix:
* Half of backspace button is shown on call status screen. However if I lose the signal (happens very often in my apt ), the backspace button does not show.
Customizations, which may be useful for a few:
* Install vjbrisk to redirect calendar to thumbcal. After installation, rename vjbrisk.exe to calendar.exe, and rename a thumcal shortcut to vjtarget.lnk, then post the new calendar.exe and vjtarget.lnk in the \windows folder to redirect calendar to thumbcal.
* Reinstall newest google maps to main memory. It simply works after reinstallation.
my issue is when u flip the phone when its on the home screen it doesnt fit and it always goes back to portrait mode
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
damnitpud said:
I am having the landscape problem also, if it does flip to landscape it is cut off. Most the time it won't even flip!
I am having a problem with the Device lock, after a reboot the device lock works fine but once i unlock it...i can not lock it again. Which sucks because if i try to take it out of the belt clip when i am getting a call it always pushes the call to voicemail!
I was just about to search for these issues when i seen this new post. I'm going to search now...maybe someone from here will be in that search with the answers =)
Click to expand...
Click to collapse
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
kidnamedAlbert said:
for device lock, just lock your phone manually then unlock. DeviceLock SHOULD work now
Click to expand...
Click to collapse
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
damnitpud said:
Thats the thing i do try it manually, when i click on the Device Lock the phone beeps so i know i hit it but it never locks. I have tried using the shortcut under Accessories, tried putting a shortcut under Programs, I even went into the Windows folder and clicked Devicelock.exe. All of them do the same. i think it just might be corrupt. Can you up your devicelock.exe from your Windows folder?
Click to expand...
Click to collapse
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
dude i mean by holding the end key! sorry for not being clear enough.
yeah that always happens to me. and i solve by holding end key and unlocking and DeviceLock works again
mcdavey said:
you can't even get the device to lock by holding the end key? also where do i put the vistahide exe so i can launch it from the program launcher. i don't really want it to start on startup.
Click to expand...
Click to collapse
Holding the End key worked! I didn't know about this, maybe i did just didn't remember, I'm not sure...it sounded familiar when you said it. Awesome Thanks for the tip!
hoolahoous said:
Using 7.3.1
1) Activesync is always on. Even after turning it off it restarts in background after some time.
2) Battery status icon on home page always shows full. Had to install a third party battery meter to show correct status.
Click to expand...
Click to collapse
The Same! With Version 7.3.1
And:
If I direct via Startmenu e.g. to the accessories folder and then want to go back, it sometimes happens, that it needs some minutes to show all Icons or hangs up!
PSShutXP doesn't safe the settings for an automatic reset!
And last:
If I want to add something to Programs Tab I have to press 2 times on the "+" Symbol on the button. the first time only the wait Symbol appears and fanishes, but nothing happens!
The same with adding weather and Contact
ruebyi
Heres an issue, when using a headset for music when you go to audio booster to try to change settings on the equalizer you CANT check the "On" Button. This was a problem with the STD version as well and thought that it was fixed in this release(OTP v7.3.1 TouchFlo 2D Final ) and it still isnt . Is my headset not compatible or is this just a bug with the software?
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Abbens said:
for me its google maps. when i had another rom on open touch biggy i believe it worked with the proxy last week. now it says i need data. yet my email works and the web doesnt on the opera anymore.
Click to expand...
Click to collapse
have you tried updating google maps to main device? have you run the network wizard? also which version are you using?
Battery Bar!!
anyone notice that the battery bar doesnt go down even though it's like 50% already?
I'm sure all of you know about tobias.walvogal's RealVGA by now. Awesome program by the way, found here:
http://forum.xda-developers.com/showthread.php?t=327830
For those of you that have used it you know that the respack provided by tobias may be a bit outdated and is missing the a few dll's. Attached is my respack cab pulled from ATT's Tilt ROM CE OS 5.2.19214 (Treo Pro is 5.2.19216). Sorry, English only.
Edit (11/11/2008): You also need to install sdkcerts.cab below because my dll's in the respack are signed with sdk test certs.
Also, you will notice that the battery indicator is pretty much useless once you go 96 dpi. Simply unzip and copy the attached BatteryIndicator.exe to your Windows folder on your pro via ActiveSync and soft reset. No need to use Total Commander or Resco Explorer. You will lose the line that is now your battery indicator and you will have the volume symbol instead. To revert back simply delete BatteryIndicator.exe again via ActiveSync and soft reset again.
Lastly, to get the regular windows mobile battery indicator back you will need to go to HKLM/Software/Microsft/Shell and change ShowTitleBarClock from 1 to 0. If you guys want a cab to make this change I can make one, but if you're already able to complete the 2 steps above you should be more than capable of making a registry change.
Good Luck!!
Is there any other way to remove the useless battery icon from the tray? Tried your program a few times and worked at first but now, its a no go.
Thanks for the files, but for me this made things worse.
happycollin26 said:
Is there any other way to remove the useless battery icon from the tray? Tried your program a few times and worked at first but now, its a no go.
Click to expand...
Click to collapse
Instead of removing the battery icon, you can use ArielBattery 2 (freeware). You can position this meter over the old (useless) battery icon.
Optionally you can add a link in the Windows\Startup directory to the program, to automatically load it after startup.
oVan said:
Thanks for the files, but for me this made things worse.
Click to expand...
Click to collapse
Just curious, what got worse? Other than some sizing problems.
Hi,
How do you make the registry changes stick??? I got them to change, but they go away when I perform a soft reset.
Thanks,
Rich
The DK96 res pack certainly seems to be better than the original in that the threaded SMS icons are now displayed However, the 'Start Menu' icon found at the top-left of the screen and the "X"/"OK" normally found at the top-right of the screen are now missing!!
The 'Coms Manager' seems to have problems whichever 96 respack you use.
In addition, I have just noticed that the icons shown on my start menu are wrong (they show application icons for 'Programs' and 'Settings'.
It would be great if these issues could be resolved
Indeed, those were my gripes too...
I was never able to figure out the Comm Manager issue. As for the remaining icon issues you need sdkcerts. Sorry, totally forgot. See first post.
Thanks akadonny, the missing icons are now there!
I just have to find some way around the Comms Manager now. Does anyone know if there is another Comms Manager I can use?
When I use RealVGA I just turn off the HTC Comm Manager. I don't actually use it other than to turn the bluetooth on and off. You just need to change:
HKLM/ControlPanel/WrlsMgr
Redirect = \Windows\CommManagerLink.exe
to
Redirect = \Windows\wrlsmgr.exe
You'll be left with the generic wireless manager that only has Phone, Wireless and Bluetooth. All of the Treo Pro hardware buttons (radios off with top power and long hold of side for wifi) should still function normally.
akadonny said:
Also, you will notice that the battery indicator is pretty much useless once you go 96 dpi. Simply unzip and copy the attached BatteryIndicator.exe to your Windows folder on your pro via ActiveSync and soft reset. No need to use Total Commander or Resco Explorer. You will lose the line that is now your battery indicator and you will have the volume symbol instead. To revert back simply delete BatteryIndicator.exe again via ActiveSync and soft reset again.
Click to expand...
Click to collapse
When I attempt to copy the unzipped batterIndicator.exe file that is 0 bytes to the palm pro, a message appears that asks if I want to replace the existing file that indicates the current file is 19.9 KB and date which it was created. I can click, Yes, Yes to All, No, or Cancel. If I click Yes or Yes to all, a dialog appears that states BatteryIndicator cound not be placed on the device. You do not have permission to create this item. Now, whats up? I asked earlier and did not get an ANSWER.
IM having a problem...after removing Real VGA and the 96dpi respack and then soft resetting i still have the same res as if RealVGA is still installed.....
Just wondering whats going on.....is this normal?
Did you notice under programs that there is a RealVGA icon?
akadonny said:
I'm sure all of you know about tobias.walvogal's RealVGA by now. Awesome program by the way, found here:
http://forum.xda-developers.com/showthread.php?t=327830
For those of you that have used it you know that the respack provided by tobias may be a bit outdated and is missing the a few dll's. Attached is my respack cab pulled from ATT's Tilt ROM CE OS 5.2.19214 (Treo Pro is 5.2.19216). Sorry, English only.
Edit (11/11/2008): You also need to install sdkcerts.cab below because my dll's in the respack are signed with sdk test certs.
Also, you will notice that the battery indicator is pretty much useless once you go 96 dpi. Simply unzip and copy the attached BatteryIndicator.exe to your Windows folder on your pro via ActiveSync and soft reset. No need to use Total Commander or Resco Explorer. You will lose the line that is now your battery indicator and you will have the volume symbol instead. To revert back simply delete BatteryIndicator.exe again via ActiveSync and soft reset again.
Lastly, to get the regular windows mobile battery indicator back you will need to go to HKLM/Software/Microsft/Shell and change ShowTitleBarClock from 1 to 0. If you guys want a cab to make this change I can make one, but if you're already able to complete the 2 steps above you should be more than capable of making a registry change.
Good Luck!!
Click to expand...
Click to collapse
It doesn't work on my Treo Pro There is just 128 dpi...
Can somebody help me?
I did it like You said but realvga doesn't see your 96dpi. The old one works but there are many icons missing - in sms mode.
xxpinballxx said:
IM having a problem...after removing Real VGA and the 96dpi respack and then soft resetting i still have the same res as if RealVGA is still installed.....
Just wondering whats going on.....is this normal?
Click to expand...
Click to collapse
Reinstall RealVGA
Select 128dpi
Then Uninstall.
Trying out RealVga on my treo pro in 128 and 96dpi.
After uninstalling (from 128dpi), was hoping that it would back to normal but i notice that my icon has grown bigger than previuos. I don't think this is normal.
What can i do? I don't like a bigger icon
akadonny said:
Lastly, to get the regular windows mobile battery indicator back you will need to go to HKLM/Software/Microsft/Shell and change ShowTitleBarClock from 1 to 0. If you guys want a cab to make this change I can make one, but if you're already able to complete the 2 steps above you should be more than capable of making a registry change.
Good Luck!!
Click to expand...
Click to collapse
An exported bckp key (using Resco Registry) it's fine with me, since I can always imported back into the registry with the ShowTitleBarClock = 0 and do the soft-reset.
xxpinballxx said:
IM having a problem...after removing Real VGA and the 96dpi respack and then soft resetting i still have the same res as if RealVGA is still installed.....
Just wondering whats going on.....is this normal?
Click to expand...
Click to collapse
I think you are supposed to first (before you uninstall realVGA) switch back to 128 dpi and then proceed with the unistall, so the qvga sticks after a soft-reset.
This is locker (screen and sometimes buttons) what i have made for myself.
It's alternative for S2U2 and windows screen lock.
Main features:
1. Lock screen and keys on wake up, but only when ambient light level low
2. Lock screen when any phone activity (dialing, talking, incoming call offering). Because proximity sensor works not very good.
3. Quick unlock without slide using double click on hardware Back button
4. Quick power off after resume if not unlocked
5. Adapted for Inesoft Phone (greate app for me because of customizing contact rings and custom names for phone fields of contacts)
Additional features:
1. Reminders for missed calls, unread sms messages
2. Screen off after call connected
3. Vibrate alerting during the call: connected, n-th second of talking
4. Alternative sms alerting (used by me for setup once and did not setup again after reflash
5. SMS patch utility replace of Zenyee disable Htc Messaging (white form appears on the screen for short time nervous me)
6. Auto redial if call dialing failed
7. Changing keyboard when stylus in/out (yep, i know that HD2 does not have stylus)
8. Simulate stylus out event for unlocking S2U2 with double click on hardware button Back
Disadvantages
1. Settings changed only through registry
2. Minimalistic interface
Advantages
1. First stable build of this utility with good CAB install and uninstall (hope for this)
2. Changed for best (for me) locking of the phone
3. Native code only (I like managed code, but it's speed periodically sucks for small apps)
Install
1. Install attached CAB
2. Settings described in readme.txt file in installed directory (default is \Program Files\HtcExtFun)
Hints
1. This tool can not lock Answer and End hardware keys in call (i don't know hot to apply this and don't want to do this)
Will be interest for your feedback!
A pity none has still posted his feedback, so let me be the first.
1- great app: i use version 0.2 since a long time with great satisfaction (and now that Leo roms disables transcriber in SipMenu, HtcExtFun is the only way to recall it)
2- What did work in old version seems to work well in this one as well (i used only stylus in/out and missed calls/sms reminder)
3- On my device the new screen lock doesn't work. Maybe it's because i have a Blackstone and not a Leo? Anyway i run Manila 2.5.1921 (as Leo), and on resume after suspend the "screen locked" square is there. But not only i can normally use my screen (i can swipe across Manila tabs without problems), but trying to slide the slider nothing happens: the square is still there, the cursor doesn't move. It's a pity, because this was a great improvement (it works with the back double tap, but it's the only way [and i don't like it, since when in my pocket i often press keys]).
4- It's useless i post a screenshot since what appears is the same as in yours
5- Can i suggest you to post your app in "Dev&Hacking" forum? I never read this one since i don't have a Leo, and so only for chance did find you released a new improved version.
6- There are some undocumented reg values:
* HandleSmsPatch
* MaximizeVolumeTime
* LSensorOffValue (i suppose it's for light sensor?)
7- You have not documented that "ScreenLockWhenResumePowerOff"=dword:00000000 disables the poweroff timeout
8- A thing i don't like is that app add itself missing registry keys filling them with standard values. So i, on purpose, didn't add the AlertNewSmsScript and AlertNewSmsSound, but at first start the app did add them to registry.
9- For your records, this is my reg config:
Code:
[HKEY_CURRENT_USER\Software\HtcExtFun]
"HandleSmsPatch"=dword:00000000
"ScreenLockWhenResumePowerOff"=dword:00002710
"MaximizeVolumeTime"=dword:0000000A
"LSensorOffValue"=dword:0000000A
"AlertNewSmsSound"=""
"AlertNewSmsScript"=""
"ScreenLockWhenResumeLight"=dword:00000000
"ScreenLockWhenResume"=dword:00000001
"ScreenLockWhenConnecting"=dword:00000000
"SipChangeStartupWait"=dword:00004E20
"VibrateWhenConnected"=dword:00000014
"TiltZFaceUp"=dword:000002F8
"TiltXYZDist"=dword:0000F350
"TalkVibrateSecond"=dword:00000000
"TalkVibrateLength"=dword:00000000
"StylusOutSipName"="Riconoscitore elaborato"
"StylusInSipName"="Touch Input"
"SipChangeWait"=dword:00002710
"ScreenOffWhenConnecting"=dword:00000000
"ScreenOffWhenConnected"=dword:00000000
"RedialTime"=dword:00000000
"RedialStartSound"=""
"RedialDoneSound"=""
"AlertMessagesSound"="snd-alert-sms-voice.wav"
"AlertMessagesScript"="t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertCallsSound"="snd-alert-calls-voice.wav"
"AlertCallsScript"="t300 aW60v100pw200v100r t3600 aW120v100pw200v100W60r aW200v100pw200v100W100r"
"AlertBatteryLevel"=dword:00000000
Sadly i have to edit my previous 2). Sms/missed call reminder doesn't work with this new version: no sound at all. So i switched back to 0.2
Nice!
Maybe you can help us here?
http://forum.xda-developers.com/showthread.php?t=612072
Hi exidler,
I just tried your soft, which was cool but not the soft-locker I want.
So I wanted to unsintall ... damn! It doesn't work.
Whenever I try, I got that error message "can't register touch driver" (a window titled HtcExtFun Unsintall).
I try after deleting the startup link, and a softreset, so that the exe wasn't running ..
How can I proceed ?
Thank you in advance.
I'm in the same case. I've already deleted all the corresponding keys in the reg but nothing else to do. I'm still stuck with that problem. And no way to reinstall it.
Edit : I used SK Tools software to clean all the registry and unused folders, and now it works.