Hello everybody
i have treed to connect my windows moble (WM 6.1 ) to my car phone system ( Mercedes ) with no luck !!
i have flashed my phone and used lots of ROMs with no luck either
i tried to connect from both directions, i.e. from the car to phone or from phone to car but nothing works
the phone detects the MB Bluetooth and asks for a passcode but it won't accept it, it just keeps saying not autherised ,,
sometimes it succeeds in recognizing the mobile, I dont know how, but then the phone system on the car will keep trying to connect with mobile (flashing) but not connecting !!
i did some google search and its looks that there is a problem connecting MB bluetooth with WM 6.1
i will be very thankful if somebody could guide me to a solution to this problem
thank you
I have the same problem
Has anyone checked with MB?
hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek
Are you running any firewall software? If so, this is relevant to you.
start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"
sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...
ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek
Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.
Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.
Also, are you using Vista or XP. The problems seem to be with XP.
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.
if you are putting on a new rom then put the phone in bootloader mode it worked for me
LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.
Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.
Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax
Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)
I was recently upgrading my Blackjack 2 to WM 6.1 and a power interruption occurred soon after the process begun. Now I cant get the phone to restart the process. It just goes into a count down from 4 and always disconnects after the countdown finishes. This is the what I get now at the end of the countdown while I in Bootloader mode.
USB Initial: OK
PC Connection: Fail
[Phone] Active OFF
[PDA] USB Cable Power OFF
I am using a windows Vista computer. Can anyone tell me how to get the upgrade process restarted or how to get the phone back to wm6. I already formatted the phone's hard drive after the failure during the upgrade process.
Mark in Guyana
markp_592 said:
I was recently upgrading my Blackjack 2 to WM 6.1 and a power interruption occurred soon after the process begun. Now I cant get the phone to restart the process. It just goes into a count down from 4 and always disconnects after the countdown finishes. This is the what I get now at the end of the countdown while I in Bootloader mode.
USB Initial: OK
PC Connection: Fail
[Phone] Active OFF
[PDA] USB Cable Power OFF
I am using a windows Vista computer. Can anyone tell me how to get the upgrade process restarted or how to get the phone back to wm6. I already formatted the phone's hard drive after the failure during the upgrade process.
Mark in Guyana
Click to expand...
Click to collapse
Hope your bootloader, phone driver still alive.
The method to help you is the attachment.
Thanks
nhathoa said:
Hope your bootloader, phone driver still alive.
The method to help you is the attachment.
Click to expand...
Click to collapse
Thank You The fix worked.
Do you have any idea how to keep the internet connection between my Blackjack 2 and vista pc active. I get the my vista pc to use the blackjack 2 as a modem via the usb cable for about about an hour then it disconnects and I have hell trying to get the connection re-established.
I dont have this problem with bluetooth which is much slower than the usb cable connection
markp_592 said:
Thank You The fix worked.
Do you have any idea how to keep the internet connection between my Blackjack 2 and vista pc active. I get the my vista pc to use the blackjack 2 as a modem via the usb cable for about about an hour then it disconnects and I have hell trying to get the connection re-established.
I dont have this problem with bluetooth which is much slower than the usb cable connection
Click to expand...
Click to collapse
Run Internet Explorer --> Menu --> Tools --> Options --> Connection --> check Automatically detect setting. Done.
problem still exist
no the problem still exist. It has something to do with NDIS or DHCP lease obtain and lease expire. The usb ICS works fine when I connect before the lease expires. After the lease expires the physical and IP addresses do not immediately renew as is the case with bluetooth. This causes me to not be able to use the Blackjack ICS via the usb cable for some time. Then it renews after several computer and phone restarts. I dont know if the problem is with Activesync. But my bluetooth does not use Activesync and it has its own software which is stable. I am always able to use ICS via bluetooth but not the usb which uses Activesync. Are there any tweaks or connection managers for ICS via USB?
Mark
Thank you SO MUCH
nhathoa, I would just like to thank you for the link you provided. I was stuck for about two hours trying to figure this out, and Samsung was telling me that I had to send my phone in, and seeing as how it's the only phone I have, I would have been without one for a while.
But the link you gave fixed the problem perfectly. I can't thank you enough.
I just have to say a million thanks to NhatHoa!
had the same concern as described above. As BlackJack2 is not an European model, my local Samsung workshop couldn´t help me. Also other unofficial workshops couldn´t do it. And I´ve found these instructions here and I thought, what the heck! There´s nothinh to lose anymore. And my BJ works now! Followed exactly the instructions and it took like some 15 minutes to complete the whole process.
Hate to bump old threads
I hate to bump a old thread but I just had the same problem with my blackjack 2, While updating to 6.1 it somehow just quit and left the phone bricked. I can put the phone in usb downloader mode but when I connect it to my computer it does nothing.
Can someone please send me the file that was posted on a earlier post? I tried to download it and it was gone.
I dont have any warranty left and would really like to get my phone working again
Thanks
Dear devs and the peoples of XDA,
I've searched in XDA about my issue but unfortunately there have been no answers as of yet. So hopefully my post here is looked at and I appreciate if someone is able to shed some light into this.
First of all, I have a Windows Mobile 6.1 professional (touchscreen) phone (Samsung i780) and subscribed to an unlimited data / internet plan. Surfing the internet using the phone is fine (eg. 4 hours straight) - so here is the issue :
When I connect my phone via USB to a computer running WinXP using Internet Connection Sharing (ICS) - it connects without any issues and I am able to surf the internet.
However, after a few minutes, I get a 'page not found' error and upon double clicking the network icon beside system tray clock, I noticed that it 'hangs' or become unresponsive.
So I had to disconnect ICS via phone, then connect it back to re-establish connection.
This bothers me because I can't download any large files as the connection will 'hang' and (unfortunately) the server does not support resume functionality.
Ok and here's what I have done to troubleshoot :
From the phone side : I've done 'hard-reset' and straight connect to ICS via USB. I am using the standard ROM that comes with the phone when I first bought. The result : Issue persists.
From PC side : I have not formatted my PC yet, however i have created another user account to connect to ICS. The result : Issue persists.
Now to troubleshoot, I've switched my SIM to another WM phone (Omnia i8000), using another USB data cable. Still trying to see if I am able to replicate the issue. However I would appreciate your comments or suggestions or (ultimately!) a solution for this issue.
Thanks!
Hi there
I have an "issue" on my device.
I'm on marshmallow (yep I know.. but) ^^
On first attempt to connect to any BT-device the connection will be unsuccessfull, the second one will work as intended. That wouldn't be a problem is the system would try to connect to ALL my listed BT devices, one after the other one.
I develop BT speakers as hobby. I have about 15 BT devices listed.. you can imagine the frustration I have when I have to wait 5-10min that he succeed to come back to the first one I tried to connect -.-'
Does anyone knows how I can force connect to one specific device? I feel pretty stupid, but I didn't found any settings for my BT
Grüß,
H.