Related
The Cruise doesnt have an OK button. I find it frustrating to use the DPAD for scrolling, but then have to reach to the top to tap the OK button in the upper right hand window of the window. Is it possible to remap a hardware button to this task?
I tried AE Button, but it doesnt seem like AE button behaves properly for me on the Cruise.
Does the red phone button not act like an ok button on your phone?
AE Button does work. I use it on my Cruise and have mapped the IE button to become the OK button. One thing I have noticed is that depending on which ROM you are using, sometimes you have to select the "OK/Close" action and other times you have to choose the "Close active application" action.
I Hope this helps
The red phone button does exaclty that.
Why do you map this action also on another button?!
TDO
TDO said:
The red phone button does exaclty that.
Why do you map this action also on another button?!
TDO
Click to expand...
Click to collapse
No, the red button will only minimise the application but it doesn't act like an OK button. In any screen or dialog where you need to press OK, pressing the red button will only take you back to the Today screen and will not press OK. By mapping a hardware button to have the OK feature, the button searches for the OK button on the screen and presses it.
mkhattab said:
No, the red button will only minimise the application but it doesn't act like an OK button. In any screen or dialog where you need to press OK, pressing the red button will only take you back to the Today screen and will not press OK. By mapping a hardware button to have the OK feature, the button searches for the OK button on the screen and presses it.
Click to expand...
Click to collapse
I have Dinarsoft's Handyswitcher for task management. I use the following key mappings to supplement for lack of an OK/Windows Button(s):
Long Press Phone start - HandySwitcher Menu
Messaging Button - Launch QuickMenu
Long Press End button - Suspend
IE button - Close app (using Handyswitcher)
Update: Use AE Button
Thanks for all the suggestions. After reading your thoughts I re-attacked the problem. It turns out AE Button will work. You can set the IE key to be your OK button. Actually AE works great!
The conflict was between AE and S2u2. I did not realize S2U2 has a conflict with AE.
Issue resolved.
I really love the Cruise. I have owned the 3300, 3600, TYTN II and I like the 3300 and cruise the best. Why? The are feature packed and very light. If you dont need a keyboard (and trust me, its overrated to have a keyboard) the cruise is great.
kunicki said:
The conflict was between AE and S2u2. I did not realize S2U2 has a conflict with AE.
Click to expand...
Click to collapse
If you still want to use S2U2, you can use a setup like I posted above. No conflicts using S2U2 and I have the functions that I need without the use of a button mapper application.
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
hambola said:
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
Click to expand...
Click to collapse
same thing for me, except the O2 Orbit 2 variant actually shows a "Windows" logo button on the left and the "OK" button on the right. i have to map them as such because I'm using a custom ROM.
hambola said:
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
Click to expand...
Click to collapse
Let me rephrase that, I mapped the ok "action" to a hardware button. It can be mapped to any button, in my case I just used the top left one (for Voice).
The best for me was to map the left messaging button to win-start, double to messaging, and long press to rotate fo tomtom, the right one to ok, doubleklick to opera, long press to vibratemode.. ... i had the same on my old tytn... works perfekt with aeb-plus.
greets
voxid
Guys, this is what I have done with my button mappings and so far it seems to be working reasonably well. Well, reasonably enough that I am happy with it/can live with it.
Now I am very nit-picky and am coming from a heavily customized WisBar world. But in my quest to be stylus-free (and loving the WOW-factor of TF3D), I am able to live with the device by making the changes listed below.
-+-+-+-+-+
1. AEBPLUS - Volume Buttons
o Remapped volume buttons to provide Up/Down scrolling
o HOLD volume up or down - normal volume control
I did this because the TP was rejecting calls on its own whilst in my holster -- you know, the "press any volume button to mute the ringer" feature.
Note that if you do this, don't forget to look at the "Restore Volume Slider" option in AEBPlus (that guy thought of everything). I have all of mine unticked. Also take a look at: Options|Other Options|Control Volume Directly.
Screenshot: http://auxiliary.razer7.com/aevolume.png
··········
2. AEBPLUS - Phone Key ("Green Phone Button" in AEBP)
o Press once = Phone Button
o Press twice = Task List (Swipe left shows Programs)
o Press three times = Action List <-Note the Cut/Copy/Paste here!
Screenshots:
Task List: http://auxiliary.razer7.com/tasklist.png
Task List - Swipe Left: http://auxiliary.razer7.com/programs.png
Action List: http://auxiliary.razer7.com/actionlist.png
ABOUT THE TASK LIST: The Task List (and Programs list) is all touchable. AEBPlus provides its own task list as well but it isn't as nice as the one that I am using nor is it fingerable. The one that I am using is a freeware program called "MortButtons".
Download MortButtons here:
http://www.sto-helit.de/index.php?module=download&action=list&category=13
NOTE: Don't forget to also download the "ClickLED" skin on the same page. This skin closely matches the TF3D colour scheme.
During my testing, I've noted that MortButton uses about 250K (if you decide to leave it resident (recommended!)) and zero CPU since it is being called by AEBPlus.
ABOUT THE ACTION LIST: The "Action List" (as pictured above) is part of AEBPlus and can be custom-catered to your liking. I like to keep it simple and simply have cut, copy and paste in there, as well as toggle Wi-Fi (which works on the TP).
··········
3. AEBPLUS - End Call Button ("Red Phone Button" in AEBP)
o Press once = End Call
o Press twice = Last Task (ALT-Tab)
o Press thrice = Call DinarSoft TapText*
* "TapText" is a little utility that allows you to create a menu with clippings in it. I used it for email addy's and more. Check it out. I find it very useful and worth the ten bucks to register.
Screenshot of TapText in action: http://auxiliary.razer7.com/taptext.png
-+-+-+-+-+
4. About the Home and OK Buttons...
Now these two buttons *can* be mapped using AEBPlus, however, they can't be *re-mapped*.
In other words, if you map something to these buttons, they will also perform their inherent functions (i.e. the Home button will always go home first; the OK button will always send an OK message to the system, etc.)
Personally, I have left these two alone.
-+-+-+-+-+
CLOSING COMMENTS:
Now there is MUCH MORE you can do with the above two apps in the configuration I've described. Customize it to your delight.
I hope that this post helps some of you guys out. I need to give back to this community!
This community R0X.
Thanks for sharing. Will try this out as soon as possible.
You're very welcome!
I was playing around with this setup earlier today and so far, it has been working really well.
Take care.
I have AEBPlus and it is working great. My home key is mapped to be the start menu on a single press and torch on a long press, the back button closes active applications on a single press. My soft keys are mapped to lock the device and contacts. Works perfectly for me.
I'd already re-mapped the volume buttons as you did, though for a different reason. I use MS Readern often, and find the circular direction button on the TP pretty useless - I try to press arrow down and get the centre keypress instead more often than not. The volume buttons are a perfect substitute.
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
grezz said:
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Click to expand...
Click to collapse
Absolutely. I have only single click (directional up or down) and press-and-hold (volume control).
I often double-click the volume button to move up two elements, etc.
Excellent tip. Something definitely worth noting!
P.S. One quick note about the smartwheel: I used to HATE it but now I LOVE it. U have to get used to it and memorize the length of your stroke, etc. Once you do, tho, honestly, doing things become a breeze (especially whilst reading RSS).
yan2k said:
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
Click to expand...
Click to collapse
Hiya, Yan2K!
I'm glad that you're enjoing AEBPlus and MortButtons.
In AEBP, the '<-' is mapped as the "OK Button" (which is precisely what that button means; some people like to call it the "back button" but it actually send a WM_OK message to the system).
As for the HOME button, you will have to map it...
In AEBPlus, go to the FILE|ADD BUTTON menu entry and press your HOME button. The TP will go back to the home screen but don't worry -- AEB is still running. Just click on your Quick Menu in the home screen (upper right corner of your task bar) and switch back to the AEB task.
Now remember: if you map these two buttons, they will NOT unmap their original functions... I generally leave these two buttons alone m'self.
Cheers!
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
yan2k said:
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Click to expand...
Click to collapse
Mapped the volume buttons as you did. Just what I was looking for. Also set 'back' to proper 'ok/close'.
Cheers.
I think,the original functions are hardcoded somewhere(dll or something else). We need to find the file and modify it to disable these functionalities.
I remapped the "green" button the following way:
1 press) Phone application
2 presses) Alt+Tab
However, now when there is an incoming call I can't use it to answer. Which is quite logical.
Is there a way around this?
le_cactus said:
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
Click to expand...
Click to collapse
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
yan2k said:
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
Click to expand...
Click to collapse
Oh man, the OK button is one of the buttons I miss the most.
Specially while texting and such.
I hope I can remap some of the full keypad buttons as well.
I noticed that it sometimes doesnt' start up well, but oh well.
I re-maped the volume down to Ok/Close and Volume up to Start Menu
Then changed the volume settings to long hold, Which half the time when i press the buttons the volume comes up. haha.
hello!
I want to remap some buttons and I've tried with AE button Plus without success. Can you help me?
What I have is the call button configured for a long press to cyberon voice dial.
The disconnect button long press is for vibrate / ring.
what I want is to turn home and back buttons long press to wifi and bluetooth on/off and.
is it possible?
can I do this without AE button +? like a registry change? would be even better... or another program suggestion is also a good help!
Please help!
deiota
Is it able to remap the PTT button? That would be AWESOME.
dumb question, but where can I download AEB Plus?
I can't find a direct link or site to get the program!
Thanks...
http://ae.inc.ru or ask directly the author AE(here on XDA-Alexander Eltsyn).
So, is there any way to change the mapping on my keyboard? Like the hot button keys really get in my way, and I'd rather have a TAB key than a CAPS key, and stuff. So is this possible yet?
Hi all. I am ready to take the plunge and get the ATT Fuze once it is out here in the US. I don't want to flash it yet with custom ROMs. Can anybody tell yet (maybe by looking at the ATT ROM structure) whether it would be possible to remap the PTT button? (so we can remap it to MS Voicecommand)
GermanGuy said:
Hi all. I am ready to take the plunge and get the ATT Fuze once it is out here in the US. I don't want to flash it yet with custom ROMs. Can anybody tell yet (maybe by looking at the ATT ROM structure) whether it would be possible to remap the PTT button? (so we can remap it to MS Voicecommand)
Click to expand...
Click to collapse
Search, I already posted this.
Well, either a mod removed my post on how I remapped my PTT button on the Fuze or the search function ****ing blows. I can't find it using any of the key words and searching only my posts, so good luck figuring out what to edit in the registry, but I assure you it can be done.
I'm almost certain I've read AE Button Plus can remap it. I use it on the 8525 for MS voice command as well.
Black93300ZX said:
CONFIRMED, this is how to keep that annoying PTT message from coming up on American Touch Pro's (Fuze maybe? whatever).
Keep in mind, you can't individually map this button with this method, that may come later.
Step 1: Registry editor, remove HKLM/Services/PTT
Step 2: Create a key in HKLM/Software/Microsoft/Shell/Keys called "40C2"
Step 3: Create a string within that key, titled Name with the value being "Button 6" or whatever
Step 4: Soft reset.
From this point on you can remove 40C2, but your PTT button will simply perform with a press what your send button performs with a hold (which can be remapped easily... Settings/Buttons/Button1(Hold)).
Click to expand...
Click to collapse
10 chars..
PTT Gone but wont let me re mapp
Thank for the start on the reg edit but I still cant re map the ATT Fuzes PTT Button. I got the PTT alert Msg to go away after I Deleted its reg. and Button6 now show in the button remapping menu, but No matter I assign to it, it wont work even after many soft restarts.
Any ideas?
Thx for help
download AE Buttons Plus. It'll let you do anything you want
Scoop3 said:
download AE Buttons Plus. It'll let you do anything you want
Click to expand...
Click to collapse
Oh really? It's funny, everyone who HASN'T had a Fuze says AEButton Plus works to remap the PTT button, yet when I used it on my Fuze it wouldn't allow it. Weird.
Black93300ZX said:
Oh really? It's funny, everyone who HASN'T had a Fuze says AEButton Plus works to remap the PTT button, yet when I used it on my Fuze it wouldn't allow it. Weird.
Click to expand...
Click to collapse
Well, I'll admit to being one of those who has said that, but now that I have a Fuze I figure it's time to put up or shut up.
Yes, you can use AE Button Plus to remap the PTT button!
Here's what I did:
1) Delete the value, not the key, of HKLM\Services\PTT\Dll (was "PTTService.dll", will now be "") and soft reset.
2) Run AE Button Plus, add the PTT button as a new key, and set its action.
Mine now brings up the camera with a single press. I haven't tried the double, triple, and long settings yet, so I can't guarantee that there aren't problems.
wmm said:
Well, I'll admit to being one of those who has said that, but now that I have a Fuze I figure it's time to put up or shut up.
Yes, you can use AE Button Plus to remap the PTT button!
Here's what I did:
1) Delete the value, not the key, of HKLM\Services\PTT\Dll (was "PTTService.dll", will now be "") and soft reset.
2) Run AE Button Plus, add the PTT button as a new key, and set its action.
Mine now brings up the camera with a single press. I haven't tried the double, triple, and long settings yet, so I can't guarantee that there aren't problems.
Click to expand...
Click to collapse
Hey I would like to do the same exact thing you did. I'm having a little trouble. I have successfully deleted the "PTTService.dll" value under HKLM\Services\PTT\Dll.
I found AEbutton plus but which version are you running? the free unsupported one or the newest one? Ive tried to run the trial version of the new one. When I try to add button the next sceen ask what type of hardware key I would like to add. shift key, win key, ctrl key or alt key.
Your help would be greatly appreciated!
hondaguyjoe said:
I found AEbutton plus but which version are you running? the free unsupported one or the newest one? Ive tried to run the trial version of the new one. When I try to add button the next sceen ask what type of hardware key I would like to add. shift key, win key, ctrl key or alt key.
Click to expand...
Click to collapse
I'm using the current trial version (will register it later today).
I just left those boxes untouched and pressed the PTT button. The code #00ED showed up, and I accepted that. That code then appears in the list of buttons, and a press-and-hold on it in the list brings up the mapping options.
wmm said:
I'm using the current trial version (will register it later today).
I just left those boxes untouched and pressed the PTT button. The code #00ED showed up, and I accepted that. That code then appears in the list of buttons, and a press-and-hold on it in the list brings up the mapping options.
Click to expand...
Click to collapse
where do you see PPT? When I open the program I see a list of;
ok key
windows key
eneter/action
vol up
vol down
green phone button
Red " "
left softkey
right "
up arrow
down "
left "
right "
and I dont see ptt anywhere when I select add new button just what I said before. and keycode is 0000
Thanks for your help
On AEBPlus, go to File>Add Button, On Add Key screen PRESS the PTT button and you will see a new button named #00ED. You can then go ahead and assign different programs.
I'm using all the One Press, 2 Press.... Long press and it's working beautifully.
Hope this helps.
hondaguyjoe said:
where do you see PPT? When I open the program I see a list of;
ok key
windows key
eneter/action
vol up
vol down
green phone button
Red " "
left softkey
right "
up arrow
down "
left "
right "
and I dont see ptt anywhere when I select add new button just what I said before. and keycode is 0000
Thanks for your help
Click to expand...
Click to collapse
KarmaNP said:
On AEBPlus, go to File>Add Button, On Add Key screen PRESS the PTT button and you will see a new button named #00ED.
Click to expand...
Click to collapse
Yes, that's what I meant.
KarmaNP said:
I'm using all the One Press, 2 Press.... Long press and it's working beautifully.
Click to expand...
Click to collapse
Great! I haven't tried triple and long yet, but I do have single and double assigned with no problems so far.
Great tips with AEBplus. I got the PTT button remapped by deleting that one registry key, and then installing AEBplus, adding a new button, and then mapping actions to it.
Anyone figured out how to remap the Home key? it's redundant with the red hang-up key in most contexts, so I'm thinking of remapping it to start menu or voice command.
Also, how to activate voice command with a key? I can't find that anywhere from within AEBplus.
thedogger said:
Also, how to activate voice command with a key? I can't find that anywhere from within AEBplus.
Click to expand...
Click to collapse
You know that it's already mapped to a long press of the lower-left phone key, right?
sweet thanks the bold press finally made me make the connection
Thanks guys!
wmm said:
Well, I'll admit to being one of those who has said that, but now that I have a Fuze I figure it's time to put up or shut up.
Yes, you can use AE Button Plus to remap the PTT button!
Here's what I did:
1) Delete the value, not the key, of HKLM\Services\PTT\Dll (was "PTTService.dll", will now be "") and soft reset.
2) Run AE Button Plus, add the PTT button as a new key, and set its action.
Mine now brings up the camera with a single press. I haven't tried the double, triple, and long settings yet, so I can't guarantee that there aren't problems.
Click to expand...
Click to collapse
This is useful info - I just remapped the button for Camera and long-hold for voice recorder. Well done sir!
(as a side note, this info might be a candidate for the "useful links" sticky thread or at least add a mention of using AE Button Plus to remap PTT button).
YOU SIR ARE AN EFFIN GENIUS!!!
thank you thank you
i mapped it over to alttab from
http://forum.xda-developers.com/showthread.php?t=316046&highlight=SNE+SPB+AltTab.cab
and now im so happy
slyng1 said:
(as a side note, this info might be a candidate for the "useful links" sticky thread or at least add a mention of using AE Button Plus to remap PTT button).
Click to expand...
Click to collapse
I second that
Is anyone elses camera now randomly comming on? lol I picked it up and all of a suden the camera came on. I def did not push the button. Its happend a few times now.
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
guitarlp said:
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
Click to expand...
Click to collapse
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
noellenchris said:
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
Click to expand...
Click to collapse
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
remap soft keys on HOME screen of TF3D
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
bmarkoff said:
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
Click to expand...
Click to collapse
Use advanced config and you can set them that way. You have to soft reset aftewards...
guitarlp said:
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
Click to expand...
Click to collapse
There is a new version of AEBPlus out, however it still doesn't get along with the Fuze very well. I Finally uninstalled it and am happy with short/long press only on the PTT. I also run GScroll and use it to double touch the capacitive screen to launch stuff...much better...
home soft keys for PI8
please explain where in Advanced config do I go to change a setting for the 2 soft keys for the home screen. I can't find anything. I found it in Diamond tweaks under 14.5 but it does not give me an option to select PI8.
The long keypress for Green button can be solved by standart button settings as a "Button1(Hold)". I have mapped for a longpress the phone interface that way(1click I use as Alt+Tab). I don't know about red button,because I use red button to instantly drop the call and this feature is missing in my version of AEBPlus and I don't need to upgrade.
Hello....is there any way of changing the action when the handsfree button is pressed or even long pressed & doublepressed
yes, same question. Extremely annoying how easy it is to accidently double tap the button and call the last person.
any suggestions anyone ??? maybe a registry edit or anything..... still waiting
The handsfree button has the same function as the call button typically.
double press -> redial (same as call button on phone)
long press ->
a) on some ROMs simply doesn't work. Guess it depends on driver version
b) if workiing, you can set the function in Buttons, gets same function as long press Button 1 (left phone button)
isnt there a cab or file cause its really annoying and would love to set it to next song or previous song
bump any one some one help its really annoying randomly calling someone
Not sure but;
Check in your registry in HKCU\Control Panel for your headset settings
Search for 'audio manager headset tool' on forums.
Try this cab
Havent tested it my self yet
[APP+DRV] [Keys remapper] Topaz Keyboard Controller GSM v1.4
markisme said:
Hello....is there any way of changing the action when the handsfree button is pressed or even long pressed & doublepressed
Click to expand...
Click to collapse
Topaz Keyboard Controller;
http://forum.xda-developers.com/showthread.php?t=555821
What is it ?
It's a solution that allows you to remap ALL keys of your device.
Any key (yeah, i mean ANY, including Home and Back keys) can be reassigned to perform desired actions.
Have fun,
Senax
Thanks for replying ... I already have Topaz Keyboard Controller installed but it does not let you configure the (wired) handsfee button.. or if there is a way then pls help !!!
i am going for another head-set...
samsung has a usb-mini where the call button is less sensitive, plus you can change the headset via mini jack
donno yet if the samsung works on htc
but there should be other brands
What about this headset?
http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=179134
djg269 said:
What about this headset?
http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=179134
Click to expand...
Click to collapse
thanks for the suggestion - see there is a hold button