I have a BT Q880 gps bluetooth receiver and my wizard recognises the receiver, but I do not know what is the passkey. Can anyone help
ok, firstly have you read the manual? (if you don't have one, check the web - manuals are out there) If not, RTFM!!!!
If this doesn't help, try 0000 or 1234 (pretty generic ones)
Related
I have a globalsat bt318 bluetooth gps.It will connect to the xda2i but the bluetooth manager only records an outgoing connection with no incoming .The software that comes with the gps has a com port scan device nad selects com 1 , although I have tried all of them.The software also suggested using baud rate 38400 , although i have tried all of the rates.I've tried everything it seems burt can not get any bluetooth input to the xda21.Any ideas?
i have a XDA2i bluetooth 1.0.3900 and i Use TOMTOM witha Ledtek BT reciever. This works well it has a connection on Bluetooth com port 6
John
Likewise...TomTom Wireless BT GPS (that grey one) and 1.0.3900 XDA2i...works through port 6 without any problems whatsoever...it's the one part of the BT stack that HASN'T p*ssed me off!!
Cheers
Anthony
Mpatterson, if com 1 is indeed being allocated, you will need to go to settings/connections and make sure the "beams" box is unchecked, also any external keyboard driver, if present will need disabling. When bonding the bluetooth gps you should be asked if you wish to use the serial profile, you should accept this, it should then allocate com5 and com6 for inbound/outbound.
ola,
i have some problems to connect the xda mini with my gps mouse. the software navigator mn 4.2 shows only:
com4: btibserial
com5: btobserial
com9: serial_date
i think the bluetooth stack doesn't work...
how can i solve the problem???
thanks a lot!!!
Have you created a bt bond with the gps (bluetooth -> devices -> new...)? It will ask to create a serial port for the gps.
I am having the gps on com5, which is the BlueToothOutBoundSerial port. Not that I could choose another port, but it works fine ever since rom 1.01.
com4: btibserial
com5: btobserial
com9: serial_date
Don't know what com9 is for, but the list looks OK. com4 bt inbound & com5 bt outbound.
regards, M
Try bthtols 1.0.1.2
Bonding BT devices/services becomes way easier
Sascha
Like many others I am having considerable trouble getting my exec to work with a fuzion gps receiver and tomtom navigator 5.
Although BT GPS appears in the bluetooth devices it still shows 'no gps device' when I go into tomtom.
What am I doing wrong?
have u setup the outgoing bluetooth serial port on the universal, and told tomtom to use that same serial port?
I have set the outgoing port as COM0.
How do I tell tomtom to use the same serial port?
I must be a bit dense!
change preferences->show GPS status->configure->page across to "Other bluetooth device"->select->continue->Com0
Thanks a lot.
It now works like a dream.
I had been following the instructions from the supplier that said link to 'Other Cable NMEA GPS' even though I was using a GPS receiver.
Hi,
I'm hoping someone out there will be kind enough to help and solve this problem before I rip all my hair out!!!
I've installed tomtom (V5.00) on my mda pro, but I can't get it to recognise my bluetooth gps receiver.
I've set up a bluetooth partnership with an outgoing COM port. My MDA allows me to choose COM0 ,COM4,COM8
When I select other Bluetooth device from Tom Tom configuration, it gives me the options:
QCT Data Interface
Serial Cable on COM1
COM7
RIL on COM6
Infrared Port
Ir on COM3
I can't seem to align the software and the bluetooth to get it working correctly. Please help
tt ver 5 doesnt work properly with bluetooth you need to upgrade
hi, i am trying to use my CoPilot BlueTooth Reciever with Tomtom but the reciever keeps asking for passkey. i tried 1111 , 0000, 9999 and other combinations.
can i use standard CoPilto GPS Reciever with other satnav software than CoPilot ?
Cheers
the thread to be removed:
the passkey is : 0183
http://www.pocketgpsworld.com/copilotbtgps.php : source