hello...
i really have a big problem.. i have flashed 3-4 devices to bigstory without a prob.
now i have flashed an mdac with bootloader v1.00 with a bigstorage image (seems to be bloader 1.02).
but after a reset i have a black screen, no reaction anymore.
if i hit camera, power and reste, still nothing happens.
the only thing i can do is to removethe backpanel. after the led switch to red...
please help, ist not my device
new info: if i klick power i hear a "klick" out of the box...
Related
I have a Jamin Running WM6 OS 4.0.0.4. I tried to change the OS but somehow it got corrupted. Now its going to the blue screen showing
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
and then it halts. I habe tried everything to take it into Bootloader mode but its not going to the Bootloader mode. I connected it to the charger, pressed the Camera Button, soft reset it holding the camera button but its not going anywhere, it just goes blank then i have to take out the battery and put it again. Maximum it goes to the black screen with white test asking just to format. I want to take it to the Bootloader colored screen so that i can connect it to USB and install the OS again. I have tried everything but its not going to bootloader colored screen. Please help.
I attempted to upgrade my Orange SPV M500 (HTC Magician).
The tool failed, and did not install anything.
However, my phone has remained stuck on the "Bootloader", displaying a white screen with "serial" if it's not plugged into the Pc, or "USB" when it is.
I've tried different reset techniques, having the battery out for long periods.
My phone booted up once, then silly me I tried the same tool again, and am back stuck!!
I bet it's something simple to press to get it to boot normal - but I just can't see it.
Please help. I know I'm in the right place to ask.
Paul.
Bootloader
you can try camera + record + reset button to get it out off boot loader mode
if it doesn't work you have to flash it
If this doesn't work, just download the correct rom, and run the update program, this will hopefully sort the problem out if pressing the buttons doesn't work.
hope this helps
Mark
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
s_m_s said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
Click to expand...
Click to collapse
you can press start + ok + reset. it will help you recover your pda
salam
salam agha mohsen man ham moshkele shoma ro daram agar dorostesh kardin man ro ham khabar konid. 09195388556
ghorboone dastet
please help me out
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
SKYWOR said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash
Same Problem
I have been facing the same kind of problem. The phone light flashes when charging and when I boot the phone, it just shows the iteq logo. I have tried the Call Start+Call end+power combination but nothing happens. Sometime it shows the orange light besides the power button but the logo still remains on the screen. On one ocassion, it did enter some image mode but gave an error that no image found. I dont have the rom either to flash it. Can someone please post the rom online if they have it and also help if they have faced similar issues.
Iteq X-bond
try
Windows flag button (Start)+OK+reset
if it doesn't work then install new windows
reseting
1 press and hold the [WIndosFlag(start)] and [ok] buttons somultaneously
2 press and release the [reset] button
3 wait up to the leds in the keyboar flahsing 2 or 3 time (less tha 5 seconds)
4 release the [WIndosFlag(start)] and [ok] buttons
must be start the resetting to the fabrique settings
[WIndosFlag(start)] button is in the down left corner
[ok] button is in the down right corner
if this not works the the keypad is dammage
iteq x-bond totally drained battery
When the battery is totally drained, all you have to do is charge it. Now here is the tip. when you charge it(totally drained iteq x-bond battery), the phone will enter into pre-charge mode for about 30min to 2 hrs( depending on how drained the battery is), the end-call button together with the right double arrow button will light steadily. Do not on the unit as this will only aggrevate the problem. Wait until the phone passes through that pre-charge mode. When the end-call button starts to flash, that means the pre-charge period is over. You can now press and hold the on/off button for about 5 seconds and the phone will start-up normally. Your problem is solved. That's it. This procedure will work only on the presumption that you did not do anything on the phone beforehand such as upgrading etc....
Hello:
As usual I tried to do some upgrades and getting stuck on the "DOPOD Enjoy Mobility" screen. The 818 Pro does not want to shut down or connect to the PC. When I try to run a good ROM - RUU_Prophet_220734_2207114_024721_NVID.exe, I get "ERROR [260] : UPDATE ERROR".
I tried to reset pressing the Comm Manager + Power button + Green Phone button nothing happens.
I tried to reset by holding Camera Button + COMM Manager + stylus in the reset" and hold it for 30 seconds it goes blank and then the HTC screen comes up and then leads to screen that displays below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 6.6.6.666
DOPOD
Enjoy Mobility
Any assistance to get me going is again is really appreciated. Please help.. no phone now....
Brenda
Got it to reset to Bootmode...had to recharge battery
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Hope that hasnt put you off flashing haha, wot rom you gonna try?
PDA Viet ROM
Hi Brenda,
I also facing the same problem in my 818 model (showing tri-color).
Please let me know, how to resolve the problem?
From where to download the firmware, and how to update the flash.
Thanks
C.Mohane
Brenda_Sheldon said:
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Click to expand...
Click to collapse
My SP5m switch off itself and it not swithch on again. while pusing power button ren blinks that it. I tryied with fulllu charged battary but same result. can any on plse help me to solve this??
Hardware
Hi
Unfortunately, it sounds like a hardware problem. Does the LED flash green/yellow or red. If it flashes RED it probably means that your main board is not working properly.
One way you may be able to rescue the device is to attempt to start it in bootloader mode and flash a ROM, preferably an official operator's rom.
Cheers
andrew-in-woking