i downloaded the newest rom from imate, URL https://www.clubimate.com/support/JAM/ROM/JAM_WWE_11200_128_11210_ship.exe
i soft reseted my device plugged it into the cradle and waited for it to sync and i started the upgrade, only to see that my device was writing something lik SERIAL and was stuck there are there was no progress on the upgrade.
Now am stuck here and i dont know how or what to do.
can anyone advice a step by step what to do?
i followed the steps on http://forum.xda-developers.com/viewtopic.php?t=28646&highlight=upgrade+step+step and i think everything is good.
Thanks guys.
Related
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
Hi everyone,
i have a
Prophet G3
IPL 2.09
SPL 2.15.0000
GSM 2.30.21
OS 3.0.0.0
device which i've just updated to the "AKU3.3.12.ASERG-us" rom. This worked perfectly fine. I would however also like to upgrade my radio rom.
So i got myself "Prophet_G3_G4_RadioRom_v2.61.21.exe" and tried to upgrade. Everything looks fine (verifies my phone, then says i've got image version 1.2.0.0 and i can click update and it claims that i will now update from 1.2.0.0 to 2.61.21), but once the RUU starts the update, my Prophet reboots, then displays the Three-Color-Bootloader screen and thats it.
The progress bar on the PC stays at 0% for half a minute, then the updater complains that it has encountered a communications error. My Prophet is not bricked or anything, but it's just not upgrading!
(After pressing reset it boots as usual).
I also tried flashing the latest XDA Neo rom from O2 Germany, and i've got the same three-color-bootloader and it's not flashing.
Can someone please tell me where my mistake is or what i could try?
This problem has been mentioned before, try the search function!
I have searched my ass of for more than an hour for a solution to this problem and didn't find it.
And all you tell me is search. Thank you VERY much. You've been of great help.
EDIT: I've now spent another 25 minutes searching and found ABSOLUTELY nothing that worked or that explained why i have this problem.
Update: I've "solved" it by trying to flash on my Laptop. I have no clue why it worked on the Laptop and not on my PC, but it did.
On my PC only a "USB Device" was found in the bootloader mode and no drivers were available for it. On the Laptop, it was recognized and flashing worked fine.
No idea why. Perhaps the Activesync version (4.5) on my PC was too new ?
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
OmenCheppy said:
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
Click to expand...
Click to collapse
Hi,
No problem, be cool. Few months ago I had this problem and was solved.
Just connect the device with bootloader onscreen (RGB). You will see USB on bottom. Flash the official ROM.
After your device is stable, you can flash to any custom ROM.
Thanking You
I've just posted this in another thread but I'll give you the same reply..
---
Try starting in bootloader mode then flashing the Wizard Love rom using the included RUU, or failing that Mun's RUU (included with WizFlo).
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
You need to start the phone in bootloader mode without the usb cable plugged in, give it a few seconds, then plug the cable in.. wait for the USB icon to appear in the bottom left corner, then start your RUU. I've found that the order is very important when dealing with unflashable wizards.
I've unbricked my phone twice with this method.. You could flash Wizard Love to a loaf of bread if you could get the cable to stick in it.
---
I used this to recover a flash that died at 10%, when I couldnt even get the official rom to work, so hopefully it should help you.
hy i wanted to upgrade my rom so first of all i backed up my contacts bla bla, took out sim and sd card, hard reset of the htc x7500 all well , i started the device and followed instructions on screen, connected the usb synced perfectly. executed Athena wrapper.exe all went well completed , everything was working fine, then soft reset the device to check if all was ok (ps. setup already finished on pc and mobile) and guess what the green light at the joystick comes up but nothing else blank screen ( hep me what can i do from this point, i can enter the boot loader, if i connect the usb, in the white bit of the boot loader i get from serial change to usb but on pc nothing saying sync connected or anything like that. il try reinstalling the active sync on the computer see if that works .
oh great gurus of this forum please help me with this urgent matter
thank you anticipated
ps it is my first time doing this , i have it knowledge, and i read for 5 hours inos and how to's from the forum before i did this and it still happened this mysterious problem hopefully not terminal (((
I hope that you did not take the hard spl from this forum.
This subforum and releases are for the X7510.
no i took it from the X7500 section , anyway i solved the problem :d thanks to the instructions from here :
h ttp: //forum .xda-devel opers.com/show thread.php?t= 326953
Link from above just delete the spaces and there you have it, i could not post it together as i am a new member and does not let me put the link yet.
i followed the link in the firs post ( the one replied to the quoted text) downloaded from there the rom update and from bootloader screen it went like a charm, after that i upgraded the rom to 1.58 witch i dont quite like it as it keeps showing only H instead of 3G or the type of connection either the settings i setup in the phone, and installed the AP4 platinum ROM and works well. hope others will get their problems solved like this too as i saw there are many with the same problem.