Unable To Power Up After Putting In Suspend Mode - MDA II, XDA II, 2060 Windows Mobile 2005 Upgrading

After upgrading WM2005 and using for few days, I am not able to power up again after putting in Suspend Mode. When pressing the power button all I got is a blank screen. I have to do a soft reset every time to use it.
Anyone having this problem and your help is very much appreciated.
Device Info:
PDA : O2 Xda II
ROM Version : 1.60c.00WWE
ROM Date : 04/22/05
Radio Version : 1.08.00
Protocol version : 1337.18

Hard reset

me 2
i do have the same problem help us please

MDAIII Avdo said:
Hard reset
Click to expand...
Click to collapse

Do you use bluetooth handsfree? I had the same problem until i disable the bluetooth headset profile on the today plug-in. Prob solved! but my bluetooth handsfree still works.
pls try

Related

rom 1.06 bt issues

hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
a software problem was also my first thought but even after a hard reset i can reproduce the bt issue?
Had the same problem.
Did a Hard reset on PDA.
And removed all bluetooth devices from dektop-pc
Let windows search for new devices and everything should be ok.
Did a hardreset half an hour ago and got the same message.
Theres no bluetooth software installed
Did a reset and stil the message.
Did another reset and damn.....stil no luck only that stupid message.
And than i did a soft reset while the mda was on the usb sync cable to pc.
MDA recognized computer and everything worked fine.
So if you got this problem, just connect PDA to pc and reset.
h4ndy said:
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
Click to expand...
Click to collapse
This has happened to me ranomly one time. I also have Calendar + today plug in as well. But I have not done any update of ROM to 1.06 at all...
I think its just a buggy OS - not surprising from Microsoft.....
I also confirmed that I experienced the same thing before the ROM 1.06 upgrade.
At most, we can only conclude that the upgrade does not fix this bug, rather than claiming that the upgrade causes this bug.
try using pocket bluetooth tools v.1.0.1.2, works wel for mini with rom106.
u can download fr. : http://www.bluetooth.jazztel.es/
I got fed up with the bluetooth and GPRS hassle of 1.06. Instead, I have now mixed and matched, and am quite happy with the combination in my signature.
I guess I now have a HTC Compact Mini Jam s100
MDA Compact -> KSE Truefax
O2 XDA Mini -> Extended Rom
i-Mate Jam -> ROM 1.03
Qtek s100 -> Radio 1.05
T-Mobile MDA to your rom, how to?
Starting with a T-Mobile MDA, how difficult would it be to get to your phone? Can you give any broad steps or links to follow? Appreciate the help. This rom is kind if slow?
Same error for me, with the original french rom.
What work for me : remove the sdcard, do a soft reset, and reinsert the sdcard after the boot process.
Has anybody tried some different stack for the Magician...as for the Qtek 9090 there are some widcome stack or others...don`t know exactly...that made some emprovements on the Magician BT? I would like to use it in car with some good BT headset...
Regards,
Primoz
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Minotavrs said:
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Click to expand...
Click to collapse
Hmm BT sux because of the BT stack...in ROM 1.03 I have no such problems (as described above)...I`m gonna wait for a few days and if the problems will be still there...will put back the 1.03 ROM.
Regards,
Primoz
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
snorlax said:
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
Click to expand...
Click to collapse
Funny...so if we want the BT to work we have to use the magician without the SD card...oh my god that is simply impossible!
Regards,
Primoz
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
I have been flashed many devices with modifed qtek rom.
And I did not see any of these errors.
Pc78 said:
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
Click to expand...
Click to collapse
Pc78, I don't think you will need any software installed on your SD card while rebooting your JAM...
Just (1) take your SD card out, (2) soft-reset your device, (3) re-insert your card, and (4) use your JAM normally.
Can't be more clear!

Jam UPDATE kill my pda

I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz

818pro hang at soft reset while on USB power but ok on AC power

Hi,
managed to get my bricked 818pro up by using the '2 wire' solution. My 818pro got bricked after flashing a rom called 'ROM AKU3.3.07.ASERG' : I can't soft reset using usb power as the device will hang with flashing orange and blue leds and no display. However when i connect to AC charger i can soft reset without any problem.
Even after I successfully downgrade my rom to OS 1.0.13.21 ( the original ship version) and unbricked my device, the problem of soft reset remains the same, can only soft reset without hang thru AC charger. Could it be a hardware problem now or can it be solved thru software?
My current settings :
IPL 1.01
SPL 2.15.0000
Rom ver :1.0.13.21 wwe
radio ver:01.12.10
Protocol ver: 4.0.13.23
can anyone help pls?

I-mate SP5 hang and restart

hi
Please help me to solve my problem
i have I-mate SP5 when i power it on phone hang and restart
how to solve these problem
Thanks
What operating system are you using?
What did you do prior to the problem?
Perform a hard reset by pressing both the soft keys and turn on the phone
karhoe said:
What operating system are you using?
What did you do prior to the problem?
Perform a hard reset by pressing both the soft keys and turn on the phone
Click to expand...
Click to collapse
Hi
I performt hard reset but phone Hang and restart only
custormer bring me phone he is technician he say phone have micro problem he try to repair it and phone don't power on after that
i don't no the system of phone it no load windows
thanks for u help
please sorry for my english phone hang restart and don't load windows
Perhaps your customer screw it up he himself
Go to my website
http://karhoe.byethost33.com/index.php?option=com_weblinks&task=view&catid=20&id=29
Refer to step 7 to learn how to access the bootloader, then disable USB Active Sync connection and load an offical WM5 AKU2 Imate SP5 ROM

I've upgraded my Magican with other model ROM

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
WOW !
I hope there is a way to fix your Magician.
can you enter bootloader?
Press Camera and Power key. Hold. Do reset via stylus.
You should see USB/Serial and 1.0X. (Screen is dark, frontlight is off)
I made mistake on my magician (mda compact). I tried to update my Magician with HTC UNIVERSAL ROM.
Cotulla said:
can you enter bootloader?
Press Camera and Power key. Hold. Do reset via stylus.
You should see USB/Serial and 1.0X. (Screen is dark, frontlight is off)
Click to expand...
Click to collapse
I can go to USB/Serial v 1.02, what to do repair ppc. ActivSinc recognized ppc and i see win folders. what's of this is rom: R 1.12.00
G 1337.42
D 1.13.01 GER.
Please help me.
you can download a rom (cotulla's great!!) and flash it...
good luck!
if you can go to USB/Serial v 1.02
i think ,you can download a new rom and flash it ....
good luck
Monostereo,
Do a search in this forum (magician upgrading) and you will see how to unbrick your machine. There is no easy way though.
A lot of users reported that and there were a lot of bricked machines due to this rom.
Ameer.ba,
Your problem is a lot easier. Just flash with any rom.
My choice:
1st Cotulla's 3.03
2nd Cotulla's 3.02
3rd Cotulla's 3.01
4th tx 2.03
5th Original rom from your phone
Regards,
Philip

Categories

Resources