hi there,
i've been looking for info. about upgrading himalaya to wm2k5 on this forum for days and i found there are several versions of the wm2k5 rom.
does it mean that wm2005 has NO memory (RAM) allocation setting so the amout of memory used to run programs is decided ONLY by (thus cannot be changed like wm2k3) the ROM being used?
but what if someone on 128Mb version found his 30M storage is not enough and he wants a 32M ramdisk?
the only way change it is to re-flash a different rom and hard-reset the device?
panyu said:
does it mean that wm2005 has NO memory (RAM) allocation setting so the amout of memory used to run programs is decided ONLY by (thus cannot be changed like wm2k3) the ROM being used?
but what if someone on 128Mb version found his 30M storage is not enough and he wants a 32M ramdisk?
the only way change it is to re-flash a different rom and hard-reset the device?
Click to expand...
Click to collapse
You got it right both times.
You did a good research job.
Sascha
Related
Hi,
I've just got a new S100 and I've got a few questions. Let me first explain at what state I am now. I got a french s100 shipped. So I updated it to WWE with the exe method and no_ID just to get it into english.
Now I would like to go for the mksbigstorage thing. I've read a lot of post on it but I would like a few clarifications.
1. Can you perform big storage through exe method or only by flashing from sd card?
2. Will I have a problem with flashing because my qtek was originally french?
3. What is the difference between exe method and flashing? Does one method do more than the other?
4. Why do I have to take the first 400 or so bytes from my own rom? Does this have to be the original french one (didn't back that one up) or can I take the one that on it now?
5. If I get stuck anywhere and my device goes dead. Is it then still always possible to upgrade the rom through the exe method to get it back to original? Or could this give problems with storage and ext_rom?
6. Is there a way to make your own rom? Are there tools for prepping files for the exe method?
7. Can someone explain me the memory devision of the qtek? I know 64 mb rom and 64 mb ram. But what get installed where? Is the ext_rom and storage in rom or ram? If you see on the memory screen storage and programs is this all ram?
8. I would like to keep as much ram free as possible. If ext_rom and storage are in ram would it be an option to not have ext_rom and have storage on sd card. If so how can one do that?
9. In my ext_rom there is tpenable and tpdisable, are these things used to specify where software gets installed? I've installed a few things and I think that they are eating up my ram.
I know these are a lot of questions but answers to these would help me understand my qtek better and help me to make a decision on what I'm going to do next.
Thanks,
Stekke.
Is there a hack for 'large program memory, rather than 'big storage'? Or is it the same thing?
Thanks for any advice, M
Program memory and storage memory is shared- BigStorage releases the previously unusable storage, therefore increasing program and storage memory.
Just use the slider to dedicate more memory to programs...although this auto adjusts itself as and when required.
Thanks that makes BIG storage worth trying. For now I got a only around 35 MB free, with all apps in storage folder and sd-card. Trying to move even more executables from ram to storage or sd. Works fine uptill now.
Sincerely, M
Try memmaid as well to move dlls and executables from \windows\ to storage.
V
Will give a try, but apps like album and camera (both approximately 500K) saved me a lot of ram. I noticed that the default album and camera are in rom, so don't take any ram, though visibke in windiws folder.
Gr. M
BIG-storage try didn't work out. After the flash back of the changed (MKS method) rom, the device stays black and will only go into bootloader. This last saved my device I guess. I tried a restore with the original 1.13 shipped rom and got the device back. Unfortunately I lost my storage folder in this and ext-rom still exists. Is there a way to get the storage folder back? Even with ext-rom is acceptable.
Thnx byba very sad M.
Boot loader magician
OLTP, I had the same problem (only boot loader working and after reinstalling 113 storage gone ), I simply tried reinstalling again and got storage back. I also did a soft reset immediately after first boot after reinstalling 113, so before the programs in extended rom would install. This freed about 25MB working memory although extended rom is still -of course- not editable. I only installed the camera and ended up with a lean magician, and no GPRS bug.
Thnx Mozart,
Will give it another try. I think you mean you installed twice the 1.13 shipped rom? Cause I tried the SD flas twice with no result, a very dead and empty magician. I did do the soft-reset before the ext-rom would autoexec and that didn't help.
So olpnly question now is, did you do the SD flash twice or the upgrade with shipped 1.13 after the failed SD flash.
Thnx in advance, M
Ps. glad I am not the only one with this problem.
I tried the SD-method 3 times, then gave up, and then reinstalled T-Mobiles latest (1.13) rom. I had to use MaUpgradeUt_noID.exe to do this, by the way...., because the SD-flash had ruined the ID of my magician. It is still ruined, but at least my magician is alive and well.
Too bad, I tried the shipped rom for the third time now and still no storage. For the rest my magician is OK. Did not have to use the noid upgrade patch or anything like it. Though the shipped rom claims the device is empty. When I find a decent extracted rom I will try again.
Sincerely, M
Hi people!
I pops this question here, use i know someone will know!
i want to change the storage allocation on my WM5 device. My device "storage" is full, but i still have storage left at "program".
Is there anyway that one can tweak etc that so i can have equal store=program??
My current allocation looks like this:
Storage: 14.5 MB, free 2.16 MB
Program: 61.0MB free 37.00MB
Wich makes it difficult to install programs on my device!!
Thanks in advance guys!!
Cheers!
^^rac said:
Hi people!
I pops this question here, use i know someone will know!
i want to change the storage allocation on my WM5 device. My device "storage" is full, but i still have storage left at "program".
Is there anyway that one can tweak etc that so i can have equal store=program??
My current allocation looks like this:
Storage: 14.5 MB, free 2.16 MB
Program: 61.0MB free 37.00MB
Wich makes it difficult to install programs on my device!!
Thanks in advance guys!!
Cheers!
Click to expand...
Click to collapse
try this forum:
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,6657
you can browse on the subject called persistent storage or ramdisk.
May I just suggest that after you successfully managed your ramdisk which means that a ramdisk folder appears and your storage total becomes 30+ (by the way, I think ramdisk and storage are the same) please do not install an upgrade for higher ramdisk as it becomes a problem of mine and the other user.
But if you insist to upgrade more and encountered a problem, please read below:
I don't know what happened to your storage card but I think I know for the ramdisk.
Well, I suggest that you hard reset your xdaII and do not install ramdisk software to increase ramdisk size. Based on my experience, after I installed the ramdisk 64, the size increased to 90+ but everytime I soft reset, the data I saved in it gets lost.
After hard resetting, the ramdisk came back to normal 30+, I found the lost previous data intact though.
I cook my own ROM of Hima WM5, based on llsbasha and C_Shekhar.
after several times, I decide using 64M program, 32M RAMDISK, 32M PagePool. At First, I success, but the second time, when I open memory from Start --> Settings, my Hima says no storage cards (my sd card ejected)
RAMDISK DISAPPEARED
How can I find it back?
zplei said:
I cook my own ROM of Hima WM5, based on llsbasha and C_Shekhar.
after several times, I decide using 64M program, 32M RAMDISK, 32M PagePool. At First, I success, but the second time, when I open memory from Start --> Settings, my Hima says no storage cards (my sd card ejected)
RAMDISK DISAPPEARED
How can I find it back?
Click to expand...
Click to collapse
I don't know what happened to your storage card but I think I know for the ramdisk.
Well, I suggest that you hard reset your xdaII and do not install ramdisk software to increase ramdisk size. Based on my experience, after I installed the ramdisk 64, the size increased to 90+ but everytime I soft reset, the data I saved in it gets lost.
After hard resetting, the ramdisk came back to normal 30+, I found the lost previous data intact though.
zplei said:
I cook my own ROM of Hima WM5, based on llsbasha and C_Shekhar.
after several times, I decide using 64M program, 32M RAMDISK, 32M PagePool. At First, I success, but the second time, when I open memory from Start --> Settings, my Hima says no storage cards (my sd card ejected)
RAMDISK DISAPPEARED
How can I find it back?
Click to expand...
Click to collapse
Can you list out the steps you are taking for the configuration you are trying to finalize? Because if you change the configuration after flashing the ROM (or on a working ROM) the settings are likely to disappaer after soft-reset).
This will only happen if your battery are old and need to change.. Some how it will not keep the RAMdisk and only by another flash will bring it back.
i upgraded my himalaya with wm5 helmis rom. my problem is its storage capacity. it only has 14 mb of storage. how am i going to extend its storage. is there any procedure for doing this? thanks.
http://www.buzzdev.net/index.php?option=com_remository&Itemid=132&func=fileinfo&id=125
or use another rom with more storage
i have the exact problem...16MB storage...always have 0.6MB free...can't install software...
tried to reduce the RAMDISK to 32 MB, program is increased, storage the same...
storage cant be inc it's flashrom and cant use the normal ram
but one can just install programs on RAMDISK it's faster then normal storage anyway it being ram (well ½ of it) and storage is flash
Use HIMA_DOC_TOOL v1.0 to increase the storage from 15 MB to 30 MB. Search the forum.
Thanks c_shekhar for your response. I searched around the forum, seems this extrom unlock has been discussed for years.
for my understand, need to run the ExtROM Tools to unhide/unlock extrom, then run the Hima_DOC_Tool_1.0 to merge storage and extrom. Now here is the question, I unhide the extrom successfully, can see it for 15.97MB, however the unlock does not work, it has the "blue square" icon and fails "Either it is not signed with a trustred certificate, or one of its components cannot be found".
Not sure this is a corrupted package or something missing from my ROM, the .rar opens fine, but the winrar reports .cab file is corrupted when trying to open it.
My ROM is 3.50c.40CS version...appreciate for your time to help!
Excellent, found the solution from buzz forum...i installed the unlocker to SD card that is why it faied...after re-installing to DEVICE, it works!!! got 30.5MB storage, very happy. Thanks guys.