Mini-USB potential on K-JAM - General Topics

Hi there,
Regarding the mini-USB port, does anyone know if it is specifically for connection in some sort of “slave” mode, or does it have the potential to be used in the same way as the USB port on a normal desktop PC?
In other words, just as a PC can communicate and control a whole load of devices (external drives, printers etc), would it be possible with suitable software for the PPC’s mini-USB to do likewise?
Any ideas most welcome.
Ken

Related

Is it possible to connect a USB harddisk to an XDA II

Is it or will it be possible in the future to connect a USB harddisk to the XDA II. There seem to be a few possabilities for it. But are any of these workable.
It would be great to hook up a 120 GB Harddisk to it especially in your car for PDF files, Tom Tom maps and lots and lots of music.
I have listed the possabilities that seem to be around please feel free to comment.
1. The XDA II has a video chip which supports IMAGEON 3200 USB On-The-Go ( designed for mobile interconnectivity by allowing a USB device to communicate with other USB peripherals (such as printers) without the need to go through a PC). Would it be possible to use this chip to connect to a USB hardisk.
Was posted by IKIRA in the thread "The XDA2 Video processor features"
2. Buy the expanssion pack and a "Dual Port USB Host CF Card" this would propably be the only working system at the moment.
3. There are already bluetooth > USB printer units on the market that allow USB printers to interface with a PDA using bluettooth. There does not seem te be a Bluetooth > USB host interface. :?:
References
References to pages on the internet about my last post.
CF > USB Host http://www.twin-paradox.com/SEPDA.html
Deja mass storage driver http://www.deje.gmxhome.de/
Imageon in the XDAII http://www.infosyncworld.com/news/n/2853.html
ATI Imageon USB On The Go http://www.us.design-reuse.com/news/news4636.html
Bluetooth > USB printer http://www.11wave.com/main/product/bluetooth_printer.htm
Toshiba USB host cable and Deja driver http://www.anypakdevices.com/PPC/
Toshib aUSB hist cable http://www.skycattech.com/toshiba_pocket_pc_usb_host_cable.html
[/url]
ah you also saw the cf adapter ;-)
i was hoping they also could make an external version, so we can connect through the connector.
mabe we can hack it ;-)
i think the cf card only uses, power, and usb in and out data transfer
There are specs from transdimension in this pdf file, don't know if it is the same chip as in the XDAII
www.transdimension.com/assets/products/ 243%20Product%20Brief%209-24-02-MU2002.pdf
1. The XDA II has a video chip which supports IMAGEON 3200 USB On-The-Go ( designed for mobile interconnectivity by allowing a USB device to communicate with other USB peripherals (such as printers) without the need to go through a PC). Would it be possible to use this chip to connect to a USB hardisk.
Was posted by IKIRA in the thread "The XDA2 Video processor features"
I was notice the USB OTG function in the ATI IMAGEON 3200 chip.
if the OTG function pins was connect to the CPU and layout on the PCB,
It is maybe add the OTG function,then we can use USB devices like mass storage drivers,HID drivers,Printer and so on!it enjoy!
If i remember correctly, the XDAII does not use the Imageon chip to provide USB, but instead uses the XScale processor (or was it just a seperate chip... I forget...) which does not support OTG, only USB slave.
As such USB OTG is not supported by the XDAII, so unless you can find a USB harddisk which does something clever to allow the harddisk to be the master device, this can't work...
Am I being Daft
I have been trying to solve this problem for a whhile (in a non technical fashion of course).
I synch my MDAIII with my PC but in the near future I would like to be able to save work from other peopls computers to my device and vice versa without the need for cables and cradles.
I have seen some usb pendrives that rather than actually containing memory as such are actually sd card readers (and other cards too). It looks like it would be quite simple to remove the sd card from my MDAIII and pop it into the pen drive reader' and plug it into a computer and vice versa.
Is this too simple - am I missing something and being dense or is this a viable possibility. If it is - its very cheap - it would cost me about £4.50! ???
Can anyone help me out here?

Connecting an XDAII to digital cameras, PC's, etc

Is it possible to connect an XDAII t a digital camera to allow me to download images on the move? Or how about connecting to any PC using a USB cable to transfer files, images, etc? I read somewhere theat the XDAII chipset doesn't support this type of connection, is this correct?
No, it's not possible. For any PDA (and our xda, too) the chipset is configured as a slave usb which doesn't allow you to use "normal" usb functions. thats also the reason because activesync exists.
You have a digital camera already in your xda 2, you can transfer files to any pc as long as activesync is installed, just click explore and you can drag and drop. Alernatively you can use a card reader, this will plug into any usb enable pc and allow transferring of files both ways.
I do not think that you can connect it bu usb - probably you need special drivers for it...
99% of htc devices don't support usb host
and can as such only be used by a host
not use other usb devices itself
some things are possible...
With the software WM5torage you can hook up your Hima or any other HTC device to any PC with no Activesync installed and it behaves like any other mass storage device. So if your camera has SD cards you can easily transfer pictures.
If you still use WM2003 on your Hima you can use accessory called Backpack to read CF cards or use a CF to any other card converter.
You can use IR or Bluetooth for wireless control of robots and other devices.
There is also RS232 on the Hima connector.

Plug external USB devices on HTC S730?

Hi,
I was wondering if it is possible to plug external USB devices on the HTC S730 (with adapter). E.g. external hard drive or cardreader?
Would be amazing
I have not seen a program yet which can do this.
The Fujitsu Siemens Pocket Loox T830 was able to do that.
You were able to switch between client / host in the USB settings.
But I think if this function really exists, then it is rather hardware dependend than software dependend.
Anyways, maybe someone has an USB adapter to test this for us
This is interesting:
http://en.wikipedia.org/wiki/HTC_ExtUSB

USBHost Driver app by Teksoft

Has anyone tried this app on HD2
http://www.teksoftco.com/index.php?section=usbinput
USBInput is an advanced HID Driver for the Windows Mobile platform. Using it, you can easily connect USB keyboards or mouses to your Pocket PC's USB Host connector, and start using your favorite input device.
Plug-in a simple optical USB Mouse and get a real cursor on the screen of your mobile device. Or connect an USB Keyboard and type emails faster, browse the internet easier, or play games more comfortable. USBInput brings more fun and more productivity!
I desperately want to try it ... but i need microUSB male to USB female converter to try anything ... If someone has it.... please give it a go...
bshakil said:
Has anyone tried this app on HD2
http://www.teksoftco.com/index.php?section=usbinput
USBInput is an advanced HID Driver for the Windows Mobile platform. Using it, you can easily connect USB keyboards or mouses to your Pocket PC's USB Host connector, and start using your favorite input device.
Plug-in a simple optical USB Mouse and get a real cursor on the screen of your mobile device. Or connect an USB Keyboard and type emails faster, browse the internet easier, or play games more comfortable. USBInput brings more fun and more productivity!
I desperately want to try it ... but i need microUSB male to USB female converter to try anything ... If someone has it.... please give it a go...
Click to expand...
Click to collapse
There is no USB host support in our Leo, so makes not much sense to play with it.
"you can easily connect USB keyboards or mouses to your Pocket PC's USB Host connector"
BlueInput might help instead, but the current version works with the Microsoft Bluetooth stack only.
actulay it seams that it does have host support
check this out
h t t p .. w w w
htcphones.net/htc-patented-usb-host-adapter
As far as I remember there is currently a person on this forum that was working on a usb host but it had to have external power since the micro usb does not supply 5v like a mini usb can. But it was working and with a usb hub that had external power he was running a keyboard,mouse,card reader.
So do some actual searching and you will find the thread.

[Q] establishing a console connection trough serial cable

Hello everyone,
I am taking networking classes and I was wondering if it's possible, instead of carrying a laptop with me, to use my SGS2(rooted) to configure switches/router with.
I bought a female to female usb adapter, and i also have a USB to serial cable. So all the cabling is fine, but still when I open a console emulator i get nothing going there...
I believe it may be parity related, but there seem to be no console parity settings on any of the terminal emulators that i was able to find on the market.
Usualy, if you extablish a console connection from a laptop via USB, the usb port gets defaulted to COM3 or COM4. Do android devices have a defaulted COM port to the usb connection, Is there a config file where I can change it, or is it supported at all?
any help would be appreciated,
thanks

Categories

Resources