Related
Hi just to let you know, TomTom have just released their upgrade from either TomTom Navigator 2 or 3 to Navigator 5. This can be found on their website.
It costs 59 Euros and your getting the whole of europe on cd plus the new software interface.
I've just ordered my copy. Lets hope it doesn't take 5 weeks to arrive :roll:
It can be found here..
http://www.tomtom.com/shop/upgrade.php?action=pda&TT=6148c3366d84713d07ab4770d8adb478
Cheers,
lydiachris
link's gone. You sure that wasn't teh upgrade for tomtom Go?
this one works...
http://www.tomtom.com/shop/upgrade.php?action=pda&TT=06fcb14888137955f86f48863bc37a85
I've ordered one but had no email confirmation... is this normal?
JB
You'll receive it shortly.. I ordered it at 11.56 CET; and received the confirmation an hour later.
I hope it works correctly on WM2005; I know it has the same backlight problem as Tomtom 4.4.
Still says "available soon" there is no upgrade path.
same old tom tom crap!
Oh well, been waiting for the much anticipated version 5, just ordered it, up to 5 weeks to wait!! It's on a bunch of CDs again (probably un-labelled and needing a 2nd navigation programme to find your way around them!!!) what happened to the pre loaded SD cards featured in their test copies?
And then there are still issues with back-lighting & probably SD problems too.
Just pour money down a black hole, get refused activation codes because you've had your phone replaced by the insurance, am I the only one who feels that TomTom is treating us like a load of brainless jerks! I've just gone 6 months without my expensive Nav3 and had to rely on 'Good old' Microsoft and their reliable Autoroute 2005!
GGGRRRRR!
Since I have no GPS< I used to use TT3 as a stand-alone route planner. For some reason I am not able to do this in TT5, since it keeps searching for a GPS signal. Does anyone here now how to use TT5 as a route planner without a GPS attached?
Has anyone actually recived either confirmation of their upgrade being shipped or it being despatched by UPS yet?!?!?!
yeah mines been posted, should be here today or tomorrow...
Cheers,
JB
Recieved and up and running (on diamond 1.2 rom). Works really well, loads of improvements over 3. My only complaint is that you can't customise the menus anymore like you could on 3. BTW it comes with full maps for all of western Europe... bargain!!
JB
No Maps Found Error In Tom Tom Navigator 5
:?
Hi guys/gals
I got hold of version 5 program upgrade which included the Benelux maps and loaded it up on my PDA but upon running the tom tom shortcut from my Today Screen I get the following error once I have okayed the legal splash screen at the start of the application
'No Maps Found'
It gives me an option to download maps, why is it not picking up the UK one I already have
My UK map is located on my SD card and I was previously running version v4.40 and this picked up the maps without any problem
Anyone have any ideas?
Thanks in advance
tomtom 5 help
Hi All, Ive just up-dated my Mada Compact / XDA Mini / Magician with tomtom 5 navigator.... its very impressive but had a few teething problems so as your always helping me out I thought id post this :
If you have an original tomtom bluetooth GPS reciever and want to up-grade to tomtom 5 but are using tomtom 3, make sure you remove POI (seperate program your speed cam sounds wont work on tomtom 5 you have to select a deafult sound) and remove tomtom 3 completly (I did a hard reset after a load of messing), then bond again with your reciever.... then when you go through the set-up select the tomtom reciever, :lol: then go to the GPS settings in prefernces and make sure you click on the little text that say 'NO GPS device' top left hand corner (its not a button just text), this will prompt you to restart the device... do it and then your GPS reciver should work ok, but if you dont re-start it wont finish the connection. Not sure if im the only one effected by this issue I did a google and nothing came up so if you have problems this should sort them out. I only found out when I was showing the fault to a friend and he clicked the text by accident! apart from that I would definatly recommend tomtom 5 up-grade Maps are much quicker for zoom + and - ... any other questions or help just ask!...
Cheers, James
:lol: :lol: :lol: :lol:
Your answer Software Guru
By the way software guru, I think that the reason tomtom 5 is not working is because you have the UK maps on from tomtom 4, these are not compatible with tomtom 5...
I have the uk version of tomtom 5... E-mail :roll: me for further details....
James
I have just got Tom Tom 5 for my M2000 - seems to work ok apart from the fact that the onscreen keyboard function when entering a destination is not there - having to use the slide out keyboard which when driving is a little awkward.
Has anyone else had this problem, and if so, have they managed to fix it? I have recently upgraded the BT stack to 3.9 which has resulted in some things disappearing - - when I soft reset, the folder called 'My' has disappeared and all the contact info and task have to be synchronized.
I also have a number of TT files in the storage memory - would this affect the operation of the onscreen keyboard?
The files in storage memory are
Tom Tom Today
Tom Tom Bluetooth Support
Tom Tom Navigator
Tom Tom Contacts Navigation
Any help greatly appreciated!
Thanks
Rich
hi i have a couple questions :: does tomtom 5 work on a hp pda ??
and some body a idea where i can fund some keys ;-) for the maps
greets
Same Problem with Keyboard
Hi
I have the Same problem with keyboard. The screen keyboard is not there on my XDA2s. Such a problem does not exist with the XDA2.
Also when i upgraded to Windows Mobile 2005, the screen goes black as soon as I open TomTom 5
Any suggesstions with such problems?
Nader
TTN 5 keyboard
There's another (long!) thread running on keyboards. Basically it seems that we have to use the build in keyboard until they release some patches. The shift/Fnc key problems do not occur in the GB 7 digit postcode selection so its usable on that.
Koksie said:
Since I have no GPS< I used to use TT3 as a stand-alone route planner. For some reason I am not able to do this in TT5, since it keeps searching for a GPS signal. Does anyone here now how to use TT5 as a route planner without a GPS attached?
Click to expand...
Click to collapse
I'm glad I'm not the only one that fell into TTN's trap! Like me I'm sure you've figured out by now that there is a seperate "Advanced planning" menu that gives you this function and lots more - to be fair it works well with lots of extra options. It's a pity there is not an operating guide that highlights these features - expecially for those used to older versions of the software.
M6 Fan said:
I have just got Tom Tom 5 for my M2000 - seems to work ok apart from the fact that the onscreen keyboard function when entering a destination is not there. Has anyone else had this problem, and if so, have they managed to fix it?
Click to expand...
Click to collapse
Me too. And no, don't have a fix. Very annoying. On the other hand, doesn't the TTN5 legal message say that you shouldn't drink and drive? No wait, enter a route and drive? :wink:
Hi, Im strarting this topic as Ive got a problem with my tomtom 5 and I wondered if anyone was having the same or could help me out :lol: If anyone else is having issues they could post on this topic so we can bring all the advice and questions in one place.
Ok my problem, I had loads of issues with the bluetooth connection these now seem to be solved, now when I am using tomtom and either in a route or not the programme just closes for no reason it just goes back to the today screen. Ive reinstalled, hard reset and soft reset ... soft reset seems to work a bit but it still does it.
PLEASE can anyone give me any advice or are you having the same issues as me? one thing I have noted is that everytime I reload without doing a soft reset the tomtom Icon at the bottom moves slightly to the left next to the bluetooth icon.
Hope to hear soon
Thanks in advance
James :?:
I have the same problem as you, it sometimes works fine, then does the same as you. from what i have read its a software fault due to the device having a vga screen or something and from what i have read it can also be dwon to tt5 using all the memory on the device then crashing out etc. Maybe they will relase a fix for it soon?.
CHeers, Were did you read this can you post the link ? I have nothihing in my programs on the pocket pc and it still does it... ! looks like they've got an issue with there software ....
Hi Guys,
I have been having excactly same problem. Initially i had a lot of problems with bluetooth. Seems to have been sorted out, god knows how.
But out of no reason TomTom exits and brings me to today screen. If i click TomTom icon again it starts and exits in 1-2 min. Only if i do a soft reset that it works a bit longer.
I am using qtek 1.11 rom.
Hope someone can come up with a solution.
Cheers,
Vishal
The problem is with the POI file. That is a comun problem. You have to take the POI.dat file from a tomtom 3 map and put ir in the map dir in TT5. All working perfect now. The only problem is that it isnt so recent and dont have the phone option. But now works
Wait for a better crack to come out. Or buy it.
elyl
PostPosted: Wed Jun 15, 2005 17:13 Post subject:
Wait for a better crack to come out. Or buy it.
Click to expand...
Click to collapse
mm thanks for the help with this issue, but i have paid for it, it was a upgrade from my tt3 that i ordered from tomtom website, so thanks for the help fixing the problem NOT!!! :roll:
i will give the poi way a try and let people know.
PS thanks Imaginati0n for a proper try at helping ppl out and not just flaming :shock:
thanks for that, my copy of tomtom 5 is working fine now, that poi.dat from tomtom 3 fixed just fine
Could someone please post the POI File from Germany from TT3 ?
Hello to all!
After I've upgraded my Magician to 1.13 I recognized my screen disaligns after 5 minutes of use. The I've downgraded to 1.12, but the disalign still stays. After browsing the forum I've recognized that much people have the same problem too. Some guy says that you should downgrade your ROM, or take the unit to the HTC European Service (if you have guarantee).
After browsing in the registry, I've found a regkey about Calibration. I modified it, and now the machine runs good, without disaligning.
So the method is the next:
1. Open your favourite Regeditor (Resco, Total Commander etc.)
2. Open HKLM/HARDWARE/DEVICEMAP/TOUCH/
3. Open CalibrationData You will see coordinates.
- The first coordinate is always x coordinate, so that is the horizontal
- The second coordinate is alwasy the y coordinate, so that is the vertical
- The first number pair (ex.: x,y) is the center point
- The second one is the upper left
- The third one is the bottom left
- The fourth is the bottom right
- and the last one is the upper right
My screen calibration is:
474,498 814,773 814,228 119,228 119,773
I hope it will help to guys who has the same problem.
If someone finds better calibrate coordinates, pls post it.
Cheers,
cheers for this , I have the same problem and have tried many different tweaks with no result.
My co-ordinates were different but then I was getting a mis-alignment problem I will give your co-ordinates a go and report back.
mine has no issue or whatsoever. working fine since...
my coordinates are:
502,498,862,771 859,223 138,229
hope this helps...
Never got no problems with it.
Coordinates are:
499,503 861,774 856, 231 148,223 142, 773
What a great discovery
Mine is a HTC Charmer (MDA Compact 2) on WM5. My data is very different
1928, 1960 3308, 617 3296, 3316
(WARNING! THIS IS NOT Magician configuration!)
can u tell me more in details pls coz i have the same problem. I must align the Screen oftenly
u wrote : Open your favourite Regeditor (Resco, Total Commander etc.)
Where can i fin this programme ?
pls help. Tks
i found the total comander and do wat exactly wat u say.
But the my problem doesnt solve
calibration data 2020i alpine
i have resive one devise with problems in alighn screen first my thought was that the problem was at rom and the extrom that was missing after lot of trying and with resco registry i found that the calibration data was missing pls pls if any one can help me by posting the coordinates of that device QTEK 2020i
Why don't you ask in the matching topic?
hey guys can you make a permanent fix for the disalignment bug of xda mini?
i have this problem...but i got a solution on this topic,but the problem is when you hardreset the ppc its going back again the problem unless you tweak it again in regeditor...
can the rom developers include this tweak for the upcoming cook rom for xda mini so that the screen disalignment can be fix...
thanks
to HyperMalac:
so, the solution is to change the coordinates with yours?? hmmm ok i will try it.. i (and my friend here) have the same problem. i thought this is LCD problem and cannot be fixed unless u change the lcd (as 1 of the member said) thx~! i'll let you know~!
not working
i have to constantly align my screen and even putting in the coordinates..it still doesn't work. I will be sending it back to the repair centre sooon.
dear all,
I want to ask how to open the registry in the WM2003?
I've installed the Total Commander, but after that I still confused what to do next.
many thanks
Open TC and open the "folder" named: \\. this \\ folder contains the registry...
NEWS:
Finally I've took my Magician to the HTC Europe Service Center...Waiting, for solution....Will post the result
Cheers
hypermalac....
so the reconfiguration in registry do not solve the screen missalignment problem? Coz I've try, but it seems no result, only the frequent of screen become missalign is decrease...
any solution for this?
Well, the registry modding, only reduced the misaligns, for me too. I saw somewhere on this forum that this problem is hardware problem, but I don't think so. Someone said, that the touchscreen has a factory malfunction. Anyway I'd took it to the service, an as soon as I get it back, I will post, if it's solved the problem, or not.
Cheers
@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....
erwinsie said:
@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....
Click to expand...
Click to collapse
Well, when I get it back, I'll ask your questions, if it's possible, and I hope too that the service give some solution for us, to avoid this problem (screen misalignment), without taking our magician to service.
Battery problem:
Changed the motherboard???Do you mean the hardware buttons?
Well, my magician works fine expect the sreen, so I haven't got any batt problem. But I will ask it too.
Cheers
Hardware Issue
Pretty sure this IS a hardware issue. Happened on my MDA Compact and got progressively worse.
No amount of hard resets, software configuration and ROM upgrades fixed it.
Came back from HTC good as new.
I have heard that using screen protectors causes this as it is touching the screen all the time.
I no longer use a screen protector so I'll let you know next year if the problem has come back again!
Has anyone managed to get tomtom working on wm6?
I cannot for the life of me work out how to stop it crashing after about 20 seconds of it running. Ive tried 5.2.
Well, TomTom 5.2 runs smoothly on my Tornado, using the Fortuna Clip-On Bluetooth GPS receiver. No crashes at all!!!
A latest PPC version of TomTom 6 Navigator (V6.201.7160) works perfect on my SP5 w/ WM6 or WM5.0 before, but the virtual mouse SW i.e. FakeCursor should be used with occasional conditions.
Its really stronger than TT5.
Heres the original package of TT6 (delete the .cfg file unless u like the chinese interface)
and the crack
Enjoy!
Admint edit: Links have been removed warez is not allowed!
How does Fakecursor work?
Everytime i tried to use it, i got problems with the backlight of display.
i cant thank you enough.. thanks for posting this!
what maps work with this? i need a great britian map.
also its very slow, the black screen and red hands splash screen stay on for a good 30 seconds.
i spoke too soon.
it hangs on the screen with the arrow after the hands. like its crashed.
i think i have a memory problem.
i'll try overclocking.
overclocking works. ive managed to get to the screen where you pick your langauge but there is no cursor to select anything!
ive pressed every button and moved my joystick in every angle and i can only change the volume and not pick a language therefor not go on to set up the rest of tomtom.
this is driving me mad
Same problem here. I've managed (after about 30' of waiting, screen after screen) to reached the Time Format selection. Couldn't go further!
Lanny, are you sure that this version runs perfectly?
i cannot get fakecursor working
Guys u should create a shortcut of FakeCursor as long_camera.lnk (or any other button u like) in windows root w/ FakeCursor.exe, NOT in storage card.
Otherwise u cant do anything after TT's logo screen.
This version i posted runs pretty good on my SP5 w/ North American map v.665.1294 for 4 days after i installed the WM6 OS from jm012a9749.
Anyway,its a PPC version,so u must use FakeCursor to change lang., maps and edit the address when u input the wrong one.
You can press hold the camera key to call out the FakeCursor anytime when u use the TT. If u wanna stop it, u can press the home key to go back to the homescreen and press the back arrow to go back to the TT's screen, then the FakeCursor will be cancelled automatically.
create shortcut
Guys u should create a shortcut of FakeCursor as long_camera.lnk (or any other button u like) in windows root w/ FakeCursor.exe, NOT in storage card.
Otherwise u cant do anything after TT's logo screen.
This version i posted runs pretty good on my SP5 w/ North American map v.665.1294 for 4 days after i installed the WM6 OS from jm012a9749.
Anyway,its a PPC version,so u must use FakeCursor to change lang., maps and edit the address when u input the wrong one.
You can press hold the camera key to call out the FakeCursor anytime when u use the TT. If u wanna stop it, u can press the home key to go back to the homescreen and press the back arrow to go back to the TT's screen, then the FakeCursor will be cancelled automatically.
FakeCursor for Smartphone
This is the FakeCursor w/ shortcut i used on my SP5, try it.
thanks i got another cursor thing working called sphelper. when ive passed all the settings i cannot get bluetooth talking to tomtom with my gps reciver.
'no gps signal'
aha, u should add a new device in phone's bluetooth setting first and create a new outgoing com port for your GPS reciever. After this step, a new com port, usually com6 will be added in TT's bluetooth setting screen. Well, choose it and enjoy!
thanks a lot
i wonder if tomtom will release a smartphone version of tomtom 6 in the not so distant future.. or is it pda only from now on.
I think its no chance to get a separate smartphone version even was told it surport PPC and smartphone platforms with one software when the TT6 was unveiled last year.
I hope the all new TT7 can surport smartphone exactly.
Tomtom 5.20
I had the same problem (Not function TOMTOM 5.20) and I have it solved. Only problem was missing file "CurrentMap.dat" in folder "\\\WinCE Device\My Documents\TomTom\".
TomTom 6 with WM5 & WM6
I read throughout all the postings to find a solution. I installed TomTom 6 v 6.010 (and had it running fine) on my original Tornado (SPV C600 running WM5) using the method described in earlier posts (copy the files manually to the device) I was able to plan routes. No issues here. However, after installing the WM6 rom (and following the same process to install TomTom) the following happens:
- TomTom starts with the black splash screen/red hands
- I get the green warning page where you need to click "Agree" and immediately, the program quits (no time to press the Agree button) and a message pops: "Your device is incompatible with TomTom NAVIGATOR"
Now what is interesting is the following:
- If I revert to WM5 (original Orange ROM) and do the same steps for TomTom, I get the exact same behavior (same message:Your device is incompatible with TomTom NAVIGATOR). BUT if I apply the patch send by Orange Security Unlock (Cab sent by orange for my IMEI), it works fine.
- So, I reinstalled WM6 and tried to apply the same patch, it will not apply and comes up with an error: "You cannot use this CAB file with this device". I thought the reason was maybe because the operator was not showing. So I used TyphoonNBFTools to put back the original operator and reflashed. Same error when applying the patch
_ So next step was to use the change in registry found on spv-developers. That change does an application unlock but still does not allow Tomtom to run. There might be other registry settings that prevents this.
Has anyone found a solution?
Thank you
I have the same problem when i installed TomTom6 in my new WM6 OS first time.
But, after i changed following registry values, everything was fixed. Try it!
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
"0000101b"=dword:00000001
"00001001"=dword:00000001
"00001005"=dword:00000028 (or40)
By the way, i used the V6.010 at first, now the latest version V6.201 works smoothly on my SP5 w/ WM6 OS.
lanny said:
I have the same problem when i installed TomTom6 in my new WM6 OS first time.
But, after i changed following registry values, everything was fixed. Try it!
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
"0000101b"=dword:00000001
"00001001"=dword:00000001
"00001005"=dword:00000028 (or40)
By the way, i used the V6.010 at first, now the latest version V6.201 works smoothly on my SP5 w/ WM6 OS.
Click to expand...
Click to collapse
Thanks for the info. I wished I waited a bit longer. I ust bricked my phone following instructions at http://www.spv-developers.com/forum/showthread.php?t=7484
Thanks again
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Never noticed that problem before. Using last version of TT7. Maybe a rom issue with the keyboard driver.
Usually I'm using the soft keyboard of TT7
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
fun_key said:
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
Click to expand...
Click to collapse
I can also confirm that this is happening to me with TT 7.915. I'm not completely sure, but I don't think it happened to me with TT 7.910
Do you all use the vga-version? I think it did not happen with the not-vga version that was preinstalled on my device.
I tried with 910 and 915, and I still get this issue :-/
Its hapening to me also. im using TT7.450 (VGA)
Buts not a problem to me. Tomtom is very fingerfriendly and it goes very smooth.
On a slightly different issue, what sort of refresh rate are you getting on TomTom in terms of map redraws per second? I'd guess I'm only getting one, maybe two, but I've seen Sleuth's video, and he looks to be getting 3 or 4.
Any ideas?
Cheers,
Steve.
I also have this issue, although I never use the keyboard while navigating. If you didn't mention it I would have probably never noticed it! LOL
@maw: Well I bought a PDA-holder for my car which holds the Touch pro with the open keyboard, since I thought, that it would be really cool (which it is if it wasn't for the keyboard not working properly in tomtom)
@StevePritchard: I am not sure, but I think I get about 1-3 fps in Tomtom.
did you upgrade your ROM and noticed this problem? As I never used the keyboard with the previous stock ROM I can't say if the ROM upgrade effected the Tomtom interface with the keyboard. I updated my stock ROM with the new version that just came out. Maybe that is the problem, I don't really know.... Very good of you to signal this problem though. Otherwise I don't think this problem can be fixed, I guess we'll just have to wait on a new version of Tomtom to fix this problem. Have you reported it to Tomtom?
no I did not upgrade. I didn't even know, that there is an available update. I am running the stock rom (from o2 germany) that came shipped with the phone.
Is there an update from htc?
No, I did not report, since my Version fell from a truck... I was just wondering whether it was damaged during the fall or if everyone has this problem. ;-)
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
Its a TomTom error, the newer TT versions dont have that problem.
I used to get this when running Elite RC2 - I moved to ROMeOS and never had the problem
komani86 said:
Its a TomTom error, the newer TT versions dont have that problem.
Click to expand...
Click to collapse
What do you mean by newer versions? I use 7.915 - Is there anything more recent?
I'm getting the same problem, and I've got 7.915 as well. No-one found a solution then?
i had this problem on 3 different versions of tomtom, along with hit or miss signal. it always thinks im inside a building but in the 1/20 shot it works i cant do anything or else "im inside a building" again. i just dont think tomtom was meant for the fuse
It is not a TOMTOM issue. It is an issue with the IME. Here is the fix.
I have attached KforTouchPro_v1.0.0.3.CAB
1. Install the cab
2. It installs to your games folder because this is a fix for several games that have had this issue (I originally discovered it because I had issues using the HW keyboard with logmein)
3. click the Switch to M$ IME button. Now you are good to go!
Thanks - I have just tried it, and TT now works fine.
The problem now is, that other things don't work anymore... I tried writing an E-Mail and it wouldn't let me abort the mail. It displayed the Messageboc, but did not accept any input. Since I write more Mails than I use TT and don't like to keep on switching Keyboard map I is not a real option.
Do you have any Idea?
Hmm.. odd, when I updated my TomTom it just disappered, I have your version aswell, good that there is a update though for you
that K for touch pro, is that KforRaphael that maps certain keys for MorphGear?
I had that installed, but cant recall if it was erroring before that, anyways, good it got solved