Hi All
I have a XDA11 i also have one of the original Nokia Cark 112 bluetooth car kits, but i cant use it with my XDA 11, i can search for it, it comes up as "carkit" i enter the nokia passkey and all seems fine, but it dose not work, ( it wont connect),
As we are a phone shop i then tried the controll box from whats labbled as a "nokia Cark 112 SE" i did the same set up this time the XDA 11 found "cark 112" and i paired using its paring code.
But still the same it dose not connect, When you first enter the paring code the blustooth kit status light flashes 3 or 4 times as if its trying to connect but never dose.
I knoe Nokia hase a so called new Bluetooth car kit "CW1" or something like that, its a few £s cheaper than the Cark 112, the spec is the same.
has anyone got any bluetooth car kits or headsets to work with tere XDA 11, if so please let me know what models they were
Carkits
applecom:
WM2003 does not have the handsfree profile for bluetooth (yet), so carkits won't work.
Headsets work fine.
oh is it not the same as "headset" because when connecting ericsson bluetooth or nokia 6310 phones you connect under "headset"
the car kit may not work, but at least i have been able to do this post from my xda over wireless lan with my sandisk SD WIFI Card.
i will try a nokia headset monday, but anyway thank you for the info on bluetoot profiles
thanks john....
I have tested XDA II working well with Parrot CK-3000
Does anyone have experience with the Parrot CK-3100 bluetooth carkit ?
I was about to go for the new Sony Ericsson HCB-300 unit when I encountered the Parrot. Featurewise it looks like a great unit, but I am interested in anyones experience using this unit.
What is the sound quality ? Are all features (like caller id etc) usable with the MDA/XDAII ...
Thanks !
Taco
Hi there,
I have recently fitted the CK3100 & have to say its been really good. It integrates with the vehicle, just like any other professionally available car kit.
That's the good news - the bad news is the XDA II (in all its guises) - still the age old problem of the lack of car kit profile means that the functionality is limited.
Yes, it does pair with the CK3100. Yes it will send and receive calls. What it won't do is make any proper use of the LCD display, nor will it allow access to the address book on the PDA.
In short, it will interact in the same way as it would any BT headset - because that is what it thinks its talking to !
If I use the car and need my handsfree - I have to muse my old Nokia 6310i - which works perfectly - allowing full use of the LCD screen and 100% access to all the data on the phone.
You may wish to check out the other threads on this site regarding the known and ongooing problem with the BT stack on the XDA II.
It's really pathetic that my old nokia beats the more advanced XDA II hands down when it comes to BT integration.
best of luck
Redz
Redz,
Have you tried installing the Pocket Bluetooth tools (http://bluetooth.i-networx.de/index_e.html) to create a carkit profile in the XDAII ?
I've ordered the Parrot and will receive it later this week.
A slight diversion
I hate hijacking but any of you guys know how to get the Motorola car kit to answere calls. O2 blame Pocket Windows 2003. MS blame Motorola. Making calls is fine but answereing is a no no so Ive to call callers back when on the road. Any ideas
GJW
redz said:
Hi there,
I have recently fitted the CK3100 & have to say its been really good. It integrates with the vehicle, just like any other professionally available car kit.
Redz
Click to expand...
Click to collapse
Hi Redz
Tell me....does it only work for the phone function, or does it puts out other sound like mp3 or Tomtom nav directions ?
thx in advance,
iGadget
igadget said:
Tell me....does it only work for the phone function, or does it puts out other sound like mp3 or Tomtom nav directions ?
Click to expand...
Click to collapse
Phone only, and just using a headset profile, without the option of adjusting the volume which results in (too) loud sound, causing echo.
I have tried searching the forums and can't find much Info.
Is anybody here using the above system for telephony & GPS; If so how do they intergrate/do they work well on the XDA II (I have ROM Version 1.72 with Radio1.17)
I Know about the headset profile probs not giving full functionality of the Handsfree use of the car kit but this doesn't bother me to much as long as I can Make and receive calls.
Thanks in anticipation!
I was going to get a CK3100, but heard so many problems regarding build quality, and lack of support, I got a HCB 30 instead.
It did not help when I tried to e-mail parrot for advice and 3 different e-mail adresses bounced back.
Works Perfect!
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
same to me have the ck3300 tested with qtek2020 - works fine. problems with 9090 but after bluetooth update now it works fine. No tests with S100 at this time.
tested GPS with destinator 3 and map&guide fleet navigator and mobileobjects fleet management system.
don't use bluetooth tools after Rom 1.66 :!: CK3x00 didn't work aber installation of this
Set up
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
Click to expand...
Click to collapse
Any tips on setting up the CK3300 with my XDA2?
Just had the car kit fitted - i need both nav and handsfree functions - but i am not sure that i have got the phone and ck3300 to bond properly. So everything is 'greyed out' on the parrot.
Using ROM 1.72.00WWE (1.72.181) and radio 1.17.00
Thanks for any help received.
If everything is greyed out then it isn't bonded properly!
Step 1
Delete the pairings you have from XDA2 and car Kit;
Step 2
On the car kit turn the control knob untill settings appear- then scroll to 'Advanced Settings' - 'pairing a telephone' - 'windows CE device'
Step 3
Now search for devices using your XDA2 and the car kit should be shown.
Step 4
Enter passcode 1234 and accept headset and serial profiles when shown.
PAIRING COMPLETE
to access your phonebook you need to transfere the contacts via bluetooth to the car kit.
Hope this helps
XDA2 CK3300
Managed to get the GPS set up (fiddling with COM ports - even imbeciles strike lucky sometimes)
Some items are now in black. However, I am not sure that I have done it right as I cannot get it to use my phone to make calls or receive them. Which is exactly why I bought it in the first place.
So, please (please please) can you tell me how to exchange my phonebook?
I am going to sit in the car right now and have a go at your bonding advice...maybe all will become clear (but that is not often my experience!)
Thanks again for your help.
You need to bond the phones in the manner I described or it will not work ; this is clearly ststed in the Parrot instructions and on their website.
(I have noticed a strong correlation between people who do not read instructions and complain things do not work!!) - Joke
You also need to make sure your headset profile is active on the XDA 2 for it to work. Again reading the instructions for the phonebook - you tap and hold a contact on the XDA2 and select 'beam contact' - 'via bluetooth' the bluetooth search then comes up and the car kit will be found you then 'tap to send'
Now i have the opposite problem!
Believe it or not, I have now got the XDA2 and the CK3300 bonding automatically so I can make and receive calls whilst driving. It works pretty well (occasionally makes an awful noise, but only occasionally). I am impressed.
However, once I had done that, the GPS is undetectable. I have tried all sorts of combinations. I have checked the instructions - and selected the long code (ends in 9600) but I am not certain that I am using the right com port. I have tried most of them without success.
Oddly, this is the one thing that WAS working before I got the car kit to work (for calls). Somehow, either I have lost the right settings OR the XDA2 won't do both (although I read somewhere that it would) OR my ROM needs updating (uh?)
Please help.
BTW, I am due a phone upgrade - I love the xda2 but would consider getting another phone if necessary, if anyone can recommend one that is fully CK3300 and TomTom compatible.
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Which COM port?
For the moment, I have a temporary solution.
However, I have updated the TomTom Navigator software and the GPS, but still don't know which port the GPS in the CK3300 should be connected to.
Any ideas?
And, thanks Nikpro for the excellent help so far - you are a true altruist and a star!
The outbound port on the xdaII is port 5 by default
On XDAII go to Settings - System tab - Bluetooth settings and make sure you check the tick box for outbound COM port.
There is also a chance you have deleted your serial port profile so tap on the bluetooth icon in the Today Screen and go to bonded devices. Select the CK3300 and delete partnership (do not delete pairing from car kit end!)
Then search for new devices from the XDAII and the CK3300 will again come up; create a new partenship and everything should be good.
Still having problems
Oddly, I still cannot use the GPS on the CK3300.
I am using my old TomTom at the moment for GPS and the CK3300 for headset - which works fine, but I wanted the CK3300 to do both.
When I try and reset the GPS to the (series of numbers ending in 9600) as stated in the info and the instructions (Nikpro, take note - I have read them - but your comment made me laugh), the TomTom just 'freezes'. Wait - and wait - and wait - and when it reincarnates itself, no GPS at all.
I am using the 1.72.00WWE rom and radio 1.17.00
I think that I have tried every permutation for the COM port.
Has anyone any ideas? Please?
When you initially pair your XDA to the car kit do you get a message about serial connection show on the screen? The problem must be with the tom tom software as with copilot and mapopolis it works fine? or the way you are pairing the two!
What software version is the car kit? PLEASE DESCRIBE HOW YOU ARE PAIRING THE DEVICES??
Hi all, 1st post and all that.
Have you tried falshing the parrot with the newest rom, mine picked up enough to make and recieve call, but i flashed my xdaII with 2.02.T1WWE this morning and it works even better.
Hope you get a result
nikpro said:
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Click to expand...
Click to collapse
Use Bluetooth tools www.bluetooth.jazztel.es
and edit the registry under hkey local machine, builtin, BTIBserial, rename BTIBserial.dll into BTIOBserial.dll
and go Start, Settings, System, Bluetooth settings and check both inbound and outbound.
Delete ALL paired devices, reboot, and re pair them.
You will now have an option for two serial ports, one for each device.
This is the only way to do it if you have two devices that need a serial port. If you have a third, you are SOL.
Normally, the stupid programmers who made the MS BT program, made it so it only had one dynamic port for BT. Some people would experience having to reboot before switching BT devices, most would have to re pair every dam time.
The new 2005 does not have this problem but it has other bugs.
They smart people at MS changed the databases so Mapopolis and other third party programs can not read the contacts or have other bugs with them. Plus the 2005 version here limits your memory.
The 2.02 - 2.06 will NOT work with Hands Free and most car kits need it and if you have caller ID via BT, you are SOL too.
The 2.20 is a stable and a good OS and the Hands free works much better. The down side is, when I get a call on the call waiting, even if I did not answer, it would disconnect the BT headset and no sound through the phone too. I would have to, click on Tools, Hands Free off, tools Hands
Free on before it would work. I have lost many clients this way.
I decided to disable call waiting in the phone settings and it only has a few bugs now like I have to turn off and then back on the BT headset after ever call or it would revert to Headset mode.
The caller ID will not display if the call is in the history of my BT headset or if it is in my contacts database.
I mention my BT headset because it is like a car system when used in Hands free mode.
Good luck, let me know if you have any trouble now.
Parrot 3100 with XDA II
Hello,
I have just put in a Parrot 3100 and it works fine as a handsfree phone.
is there any way when I am not in the car though to use my Jabra 250v headset without rebonding and selecting it as the preferred headset device?
I can't seem to switch between the Parrot and the Jabra when the other one is not in use without repairing.
Thanks for any advice
BT
Try turning of one and turning on the other and soft reset..
Ok, I have just spent my entire weekend trying to get my Qtek 9090 to communicate to my newly installed Parrot CK3300 (with GPS). I have read the manual about 3 times from beginning to end, know the whole website parrot.biz by hard (ugly site BTW), and have tried about everything in configuring, but with no success so far.
Initially I had the 2 devices paired to each other, but after I installed Tom Tom 3, it is impossible for me to get them to pair again. Nevertheless, the 2 devices "see" each other (when asked in "Linked devices"), but they can not get to communicate. From all the stuff I have read on forums and sites, it seems that I need to upgrade my Bluetooth version, but I have no idea how and where to start this procedure.
Can anyone help me out here ?
Any tips are welcome !
I received my shiny new S710 today (replacing my imate sp5) i am having terrible problems with bluetooth and my car kit (Parrot Ck3100 with latest sortware) The phone connects and syncs ok but disconnects after a few mins and refuses to connect again.
I have an old motorola h605 headset that shows similar problems of not connecting or dropping the connection.
The Ck3100 kit has worked faultlessly with my imate sp5 for the last year.
Has anyone else had any problems with headsets or car kits?!
I have done a hard reset on the S710 and have nothing installed, and also disconnected the power to the CK3100 for 1/2 an hour before attempting to re setup the pairing
iain
Nokia CK7W
On a similar note, while my Vodafone V1415 works with my Nokia CK7W, I cannot end a call by pressing the button. Last number redial (two presses) and Hold or something like it (press and hold) are OK. To be fair, the CK7W is a little dated, but has proven to be fine with both Blue Angel and Hermes.
On the plus side the audio is good, without any echo for the remote caller.
Nokia CK-7W and S710
As with the Qtek 9100, the S710 seems not to operate soomthly with the NOKIA carkit CK-7w. I have to turn volume up to 100% and the sound from the speaker is still rather quite. The person i am calling is complaining that the line is not perfect. So for me it is back to the standard corded earpiece.
So any tips using the CK-7W and vox succesfully together are welcome!
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
further to this i managed to borrow a e650 (vox) from work and it worked 100% with my car kit and tomtom and laptop!
I spoke to htc who said they had tested with the parrot ck3100 and said it worked 100%, as my phone was struggling to be detected by several devices and also struggling to detect other things that they recomended getting it replaced.
Spoke to handtech who said they would replace asap
jbn said:
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
Click to expand...
Click to collapse
@jbn
KPN
OS: 5.2.1235 (Build 17740.0.2.0)
ROM: 1.15.405.2
Radio: 4.1.12.37_02.83.90
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Had the same problem. Qtek8310 was working fine, S710 not. After a reset of the Parrot also the S710 is working fine.
aage said:
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Click to expand...
Click to collapse
Unfortenately deleting the settings introduces echo and noise (voice sounds like robot). I think S710 and Nokis Ck-7w are not made for eachother.
I will try using the Parrot 3100 as on alternative BT solution..
Parrot CK3300 GPS CAR KIT
I have the Parrot CK3300 GPS CAR KIT and no problems at all with my S710, works a dream
Parrot
Hi,
You should visit http://www.parrot.com/uk/support/downloads
and get the latest software for your Parrot. You will need a bluetooth enabled laptop or to get your bluetooth enabled PC near your car!
Flash your parrot, then connect choosing a windows CE device. It will fully sync your phonebook too.
I use the Orange E650 and connect to my Holux GPS receiver and Parrot 3100 at the same time with no problems at all.
cheers
Sinet2020
JETware
See this thread for a possible solution for the Nokia CK7W!!!!
http://forum.xda-developers.com/showthread.php?t=331096