How can i exit bootloader mode?!?
i tried camera+reset+power but nothing....
i cant use the qtek now
rui.cruz said:
How can i exit bootloader mode?!?
i tried camera+reset+power but nothing....
i cant use the qtek now
Click to expand...
Click to collapse
Just push the soft reset should get U back to normal mode. If not, yr rom is corrupted and U need to flash it back w/ yr backup.
Related
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
asaf_hermann said:
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
Click to expand...
Click to collapse
Hard reset
how??
i cant turn it on, it stucks at the beginning
asaf_hermann said:
how??
i cant turn it on, it stucks at the beginning
Click to expand...
Click to collapse
The wiki is your friend.
can you please tell me what to do?
asaf_hermann said:
can you please tell me what to do?
Click to expand...
Click to collapse
To perfomr a Hard Reset :-
In this scenario the common solution is to do a hard reset,to do the Hard reset.Press and hold the comm manager button and the voice command button,while keep the two buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button,the phone will reboot and ask for confirmation,accept it and phone will do a hard reset.check if it helps,otherwise,most probably,its a bad flash or the the extended_rom is corrupted.Reflash the official carrier's rom to clear/correct the extended_rom or reflash the TNT 19209 touchflo ,do this with getting into Bootloaders (Tricolor screen),hope it'll work.
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
ultimate solution is with me
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
naren3108 said:
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
Click to expand...
Click to collapse
Be a sport,don't start posting the same request and offering your service to everybody and in every thread, requesting them to send their phones to you for repair,you know it yourself its not feasible and practical.If you have a genuine solution,why don't you start a new thread and post the procedure alongwith the software you claim you have to revive a phone in this manner,if you honestly intend to help and do a service to the community. According to your name and email ,I presume you are somewhere in India,do you think,its viable to send all the phones from all around the world to you for repair,NO kidding !!! I don't mean any offense towards you though !
asaf_hermann said:
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
Click to expand...
Click to collapse
Activesync will not work in this situation,but if you are able to get into Bootloaders (tricolor screen) its possible to flash a rom,and you don't need to activesync to perform a flash,infact when you start a Rom to flash,it automatically cuts off the activesync all by itself even in the normal condition,so don't worry if the activesync doesn't work now,just try to get into Bootloaders mode and flash a rom.
how can i get into bootloaders mode?
asaf_hermann said:
how can i get into bootloaders mode?
Click to expand...
Click to collapse
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
if everything fails rememer me........but be fast and stop trying all hanky panky things on ur device it can damage it further........
zabardast_1 said:
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
Click to expand...
Click to collapse
yesss.. thanks!! it works!
the bootloader worked.. thank you very much! i really appreciate your work and time that you spend for me. thank you! you saved my phone.
I was updating my Galaxy R to the STOCK Taiwan 2.3.6 rom, when there was a power cut at my place. My comp switched off, and the device did too. It gave me an error like "There was an error with the firmware update", and now it wont even start up
Even the GT-i9103 Screen wont show up.
How do i fix it? Did I lose my warranty? [I DID NOT TRY TO ROOT IT IN ANY WAY, IT WAS AN OFFICIAL ROM]
Please help?!
Deadwing_Sk said:
I was updating my Galaxy R to the STOCK Taiwan 2.3.6 rom, when there was a power cut at my place. My comp switched off, and the device did too. It gave me an error like "There was an error with the firmware update", and now it wont even start up
Even the GT-i9103 Screen wont show up.
How do i fix it? Did I lose my warranty? [I DID NOT TRY TO ROOT IT IN ANY WAY, IT WAS AN OFFICIAL ROM]
Please help?!
Click to expand...
Click to collapse
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572
Tried it
mj.vikram said:
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572
Click to expand...
Click to collapse
I tried that. It wont go into download mode, Heck it wont even start up.
Tried it
mj.vikram said:
Do not get panic, First remove the battery and sim then replace the battery and try to switch it on and go to Download mode and flash the stock ROM...
If the above method is not working try this, Be careful if you are trying the below method...
http://forum.xda-developers.com/showthread.php?t=1706572
Click to expand...
Click to collapse
Yeah. I tried that method. After sending bootloader.bin...My device is responding....but not properly. Nothing is visible, only light is coming from the screen when I boot it up.
You seem panicked man. CALM DOWN. Why are you trying to downgrade bootloader?
As I understand you need to unbrick your phone by entering APX and not reset the counter using USB Jig.
Sent from my GT-I9103 using XDA
Firstly tell me these things in a clear & concise manner:
- ROM & kernel that were in use before you were flashing the stock ROM?
- Did you enable/disable (tick/untick) anything in Odin by mistake other than that was in the guide ?
- Does your windows show APX driver required when connected to the PC?
- Does you handset go into the download mode after trying to unbrick it using the method mj.vikram gave you ?
hiii....
i got in problem today with my samsung gt-s5830i...
it is rooted nd cwm installed...
i installed a lwp in it nd since then it is bricked..
i tried restoring backup from cwm but it says cant mount /data...
nd i tried mountin it through mount n storge but nothing worked.....
i also tried it through odin but phone wont go in download mode....
plz help me to revive it again....
seeking for help!!!
thanx!!!
r0hitmaurya said:
hiii....
i got in problem today with my samsung gt-s5830i...
it is rooted nd cwm installed...
i installed a lwp in it nd since then it is bricked..
i tried restoring backup from cwm but it says cant mount /data...
nd i tried mountin it through mount n storge but nothing worked.....
i also tried it through odin but phone wont go in download mode....
plz help me to revive it again....
seeking for help!!!
thanx!!!
Click to expand...
Click to collapse
Have you tried?
1. Take off the battery.
2. Wait about 1-10 minute.
3. Insert back battery.
4. Press VolUp+VolDown+Power button while phone turned off.
See if method above make your phone go to download mode.
not working....
uchihachi said:
Have you tried?
1. Take off the battery.
2. Wait about 1-10 minute.
3. Insert back battery.
4. Press VolUp+VolDown+Power button while phone turned off.
See if method above make your phone go to download mode.
Click to expand...
Click to collapse
yes.... i did it earlier...
but it still isnt going in download mode......
any other suggestion or solutions?????.....
I am stuck at this symbol...
No Rom No Backups...
Cant enter recovery or Download mode...
Help me what to do...
P.S. : Previously was on MIUI JB.. Wanted to move to stock ROM but got stuck in recovery as i couldnt flash new ROM because i couldnt mount/system... Need help asap to start my phone...
It's the black screen of death... It's bricked.
Sent from my Nexus 7 using xda premium
Umm Nop it's not the screen of death.I got the same screen once.Just flash KPE with pit file > DDLF2 and it should work fine.
:crying::crying::crying::cryingh GOD
plz tell me i can bring it back to life.... plzzz. plzzz.... plzzzzz
devilhell007 said:
Umm Nop it's not the screen of death.I got the same screen once.Just flash KPE with pit file > DDLF2 and it should work fine.
Click to expand...
Click to collapse
can you please elaborate stepwise...
thanx for a positive answer
khanjan2khan said:
can you please elaborate stepwise...
thanx for a positive answer
Click to expand...
Click to collapse
I don't remember it clearly. But just try entering download mode(I think you will get this screen anyway).
Then flash KPE through ODIN.The steps to flash KPE are provided in the development section.
Dont worry. It has happened to me too. I got my phone working within 2minutes. All i had to do was remove the battery,put it back and try entering download mode. If it doeant work try again... Im sure it will work.:thumbup:
Sent from my GT-I9003 using xda app-developers app
It happened to me the first time I ever tried flashing thru Odin and I was so scared that I bricked my phone. But then I removed the battery, put it back and entered download mode. Phew! It worked.
khanjan2khan said:
I am stuck at this symbol...
No Rom No Backups...
Cant enter recovery or Download mode...
Help me what to do...
P.S. : Previously was on MIUI JB.. Wanted to move to stock ROM but got stuck in recovery as i couldnt flash new ROM because i couldnt mount/system... Need help asap to start my phone...
Click to expand...
Click to collapse
try this
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware (credits to Adi_Pat for this guide)
http://forum.xda-developers.com/showthread.php?t=1411768
My phone is bricked and my back button is not working, is there another way to enter flash mode or unbrick my phone?
gordon0525 said:
My phone is bricked and my back button is not working, is there another way to enter flash mode or unbrick my phone?
Click to expand...
Click to collapse
OK, it could be cool to tell us more about your phone, your brick.
Indeed, if you want some help, we need to know:
What's your phone ?
Locked, Unlocked?
Unrooted, Rooted ?
What's your rom?
Stock or a custom ?
What's the last operation that you can do before your brick ?
etc...
your request is useless if you don't tell us more
Thanks in advance