Hi all
I have been building customized CAB files for my Mini and have uploaded my "Snow" fix for the Magician.
This is Guaranteed not to reset after soft reset, simply download and install this CAB file into you main memory.
Tested on ROM V1.11
The settings are fixed at
Contrast = 5
Brightness = 6
Saturation = 3
Hue = 5
Sharpness = 3
You can customize your settings if you need "Special" settings then simply hit the "Reset" button in the camera settings and it will reset back to no snow.
If you want different settings just change them or let me know and I’ll change them for you.
What is "Snow" fix ?
sider said:
What is "Snow" fix ?
Click to expand...
Click to collapse
The standard camera settings in the Magician produce a photo that has a lot of "speckles" in the photo especially in dark pictures. You can manual adjust the settings to fix the photo but the problem was after you did a soft reset the settings went back to standard (speckle’y).
This CAB holds the settings after a reset.
Sorry I didn't know. I just never tried to use the cam that much.
And thanks for the cab!
Yes... the "speckles" are annoying. I always thought that I had to warm up my ppc after i turned it on to get rid of the "speckles". And yes, it's very bad in dark light.
I have ROM 1.12 - let's see if this cab works on it.
Also, is it the same thing as setting it permanantly in the registry ?
archimage said:
Also, is it the same thing as setting it permanantly in the registry ?
Click to expand...
Click to collapse
Yes it sets and locks it in, even after soft reset. Only tested on my ROM V1.11 so far so if it works report back.
Thanks
I have a 1.12 ROM and the changed settings are not getting reflected even after a soft reset!!
I have a 1.12 ROM and the changes were applied. Pictures are nice and crisp now!!
ampda said:
This is Guaranteed not to reset after soft reset, simply download and install this CAB file into you main memory. If you want different settings just change them or let me know and I’ll change them for you.
Click to expand...
Click to collapse
Hi. A few months ago member adit posted a small program called Camera profile. See link http://forum.xda-developers.com/viewtopic.php?t=26387&highlight=camera+settings+profiles. It's a nice program to use different camera profiles. There is only one problem: the chosen settings don't become active until a reset in the main Camera program.
Perhaps you can help to fix this problem, perhaps by combining your program with the program of adit??? I would be very pleased...
Hi ampda,
How did you apply the registry to the camera without doing a soft reset? on what did you develop this? is this an application? sorry but i sold my xda mini and got an xphone so i can't really test it, but i would happily update my software as long as there are some people find it useful. thanks.
::adit
Hi,
After downloading the cab and saw the registry editing i saw this:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\01]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\02]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
although i cannot test it but i think this makes the immediate effect on the camera but can anyone confirm this? does the camera immediately take effect after you change these values? if this is true, then i will update it asap. thanks.
::adit
adit said:
Hi,
After downloading the cab and saw the registry editing i saw this:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\01]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\02]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
although i cannot test it but i think this makes the immediate effect on the camera but can anyone confirm this? does the camera immediately take effect after you change these values? if this is true, then i will update it asap. thanks.
::adit
Click to expand...
Click to collapse
Yep there the ones, and yes i can confirm that the CAB file above adjusts the settings without a reset.
If you don't change those settings the settings reset after a soft reset, I'm guessing these are the default, default settings.
The more you hack the more you learn, I'm worried them is a limit of soft resets as my Magician gets about 20 per night from testing different settings. :shock:
I have built a lot of "ampda" standard CAB files so i can hard reset and have e full customized Magician in about 1min without the need of a back up app.
They aren't a secrete i just spent some time going through the registry working and testing different settings.
"adit" please feel free to hack the settings and add them to your app, can you send me or post the new version if you combine them.
UPDATE
OK the above registry settings by themselves won't change the settings with or without a reset. The other registry settings in the CAB file change them without a reset and these hold them after a reset.
Does that make sense? If you need more testing just let me know here or PM if you want.[/b]
ampda said:
UPDATE
OK the above registry settings by themselves won't change the settings with or without a reset. The other registry settings in the CAB file change them without a reset and these hold them after a reset.
Does that make sense? If you need more testing just let me know here or PM if you want.[/b]
Click to expand...
Click to collapse
I changed all settings in de registry manually, so also \Camera\AppDefSettings\General\Brightness, Brightness_User and the other settings. But that doesn't change the settings either without doing a reset in de Camera program. Perhaps the setting remain in memory and aren't reread from the registry when you start the camera?
@ampda: hmm if the settings i mentioned above doesn't change the camera with or without reset then there's no point. In my app I changed all the registry except those i mentioned.
@pietrucci: did you try changing the registry i quoted above?
So is it true that the settings apply without a reset? because thats the only problem in my app. So if you can find which registry changes the camera settings immediately after you change the settings then its a go. note that you better close the camera app first, change the registry, and then run the camera app again. See if the changes apply. if not then... but on older rom version (pre 1.09) it works immediately. but since that time i was using ver 1.11 it didn't work so i stopped working on it.
::adit
Oh btw ampda, there is no limit in soft reset :wink: might damage ur stylus tho if u dont be careful and when it does the edge becomes sharp and scratches ur screen when ur using it :twisted: good luck
::adit
adit said:
@ampda: hmm if the settings i mentioned above doesn't change the camera with or without reset then there's no point. In my app I changed all the registry except those i mentioned.
@pietrucci: did you try changing the registry i quoted above?
So is it true that the settings apply without a reset? because thats the only problem in my app. So if you can find which registry changes the camera settings immediately after you change the settings then its a go. note that you better close the camera app first, change the registry, and then run the camera app again. See if the changes apply. if not then... but on older rom version (pre 1.09) it works immediately. but since that time i was using ver 1.11 it didn't work so i stopped working on it.
::adit
Click to expand...
Click to collapse
OK I made 2 seperate CAB files and the resaults are as follows;
These settings change the camera without a reset.
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\AppDefSettings\General]
"EnableIPSM"=dword:00000001
"EnableDayTimePath"=dword:00000000
"CheckBatteryTime"=dword:0000003C
"Ambience"=dword:00000000
"EnableHopper"=dword:00000001
"EnableFrameRate"=dword:00000000
"EnableAutoFlicker"=dword:00000001
"FlickerSelection"=dword:00000000
"ShutterSound"=dword:00000001
"BackLight"=dword:00000001
"ActionScreen"=dword:00000001
"Saturation_User"=dword:00000003
"Sharpness_User"=dword:00000003
"Hue_User"=dword:00000005
"Brightness_User"=dword:00000006
"Contrast_User"=dword:00000005
"Sharpness"=dword:00000003
"Hue"=dword:00000005
"Saturation"=dword:00000003
"Brightness"=dword:00000006
"Contrast"=dword:00000005
And these setings lock the camera so is won't reset back to a snow storm (original settings).
After downloading the cab and saw the registry editing i saw this:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\01]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\02]
"Sharpness"=dword:00000003
"Contrast"=dword:00000005
"Brightness"=dword:00000006
"Saturation"=dword:00000003
"Hue"=dword:00000005
Does this help
adit said:
@pietrucci: did you try changing the registry i quoted above?
Click to expand...
Click to collapse
Yes I did, all the settings in the registry.
adit said:
So is it true that the settings apply without a reset?
Click to expand...
Click to collapse
No, I regret to say it doesn't on my device...
I took a test: I first changed the Contrast setting in my camera program to 9.
Then I changed every Contract setting in the registry to 7:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\AppDefSettings\General\Contrast_User]=dword:00000007
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\AppDefSettings\General\Contrast]=dword:00000007
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\01\Contrast]=dword:00000007
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Camera\Property\02\Contrast]=dword:00000007
Then I restarted my camera program: the Contrast settings remained to 9.
Then when I clicked the Reset: it finally changed to 7.
So my conclusion: till now I can't change my Contrast setting by a registrychange without a reset!
(by the way: my ROM version is 1.12.).
Big problem...
pietrucci did you run the CAB file i uploaded? and if so did it change your settings without a reset.
ampda said:
pietrucci did you run the CAB file i uploaded? and if so did it change your settings without a reset.
Click to expand...
Click to collapse
No. I didn't yet...
But I'm willing to try immediately. Please can you attach them in a reply? I can't reach the xda ftp-server (resticted from my work laptop).
ampda said:
pietrucci did you run the CAB file i uploaded? and if so did it change your settings without a reset.
Click to expand...
Click to collapse
Ampda, as stated before: I’m afraid your Cabs won’t do the trick. I changed all the registry entries you mentioned in your last post manually. And my settings didn’t change! (again: until I hit the reset button in the camera program).
So if your cabs do the same thing I did, I think they won’t do the trick either…
Related
Hi ppl. I want to get rid of all TF functionalities from TP,that means TodayPlugin,Scrolling,etc...which is a part of that rubbish. Could anyone point me,how to do that? I think that Hardreset without installation of that cab can be the way,but I don't know,where to find all other cabs shipped(as ExtROM). Next thing...if someone wants to make a test after hardreset to interrupt the cabs installation procedure to disable that,I want to know,if the home/back keys will lost also their default functions without installation...someone to try it(I don't want to hardreset just for test)? If these things will be successfully for me,I will do that. Thanks.
I think it's start menu, settings, then something to get to a menu where there's a check box next to TF3D, and uncheck it.
Thanks for your tip,but I am afraid,you misunderstood my question. I want to disable EVERYTHING,that is 'extended' by the TF,not only Homescreen. Especially touch scrolling(HTC's solution is very lazy,I want to use SPB PocketPlus) and home/back keys functions(I want to handle them with AEBPlus). Simply I want to have a kind of lite ROM without any TF functionalities.
goto Window\StartUp\ and remove the .exe for touchflo
n copy it to some other folder. finally softreset...
I have deleted all of them,those were there as default(AutoShortcut.lnk,HTCStartUp.lnk,PKG.lnk,poutlook.lnk and Services.lnk),but it doesn't help absolutely. I have in startup some shortcuts,but they are known things(Chronos,AEBPlus,GPRS Monitor,auto-SIP script). No TF shortcut is presented,even I see all files in system including hidden/system.
TomasNM said:
I have deleted all of them,those were there as default(AutoShortcut.lnk,HTCStartUp.lnk,PKG.lnk,poutlook.lnk and Services.lnk),but it doesn't help absolutely. I have in startup some shortcuts,but they are known things(Chronos,AEBPlus,GPRS Monitor,auto-SIP script). No TF shortcut is presented,even I see all files in system including hidden/system.
Click to expand...
Click to collapse
You should be able to disable touchflo scrolling using Schap's Advanced Config. I don't have a TP, but i know the settings are in Advanced Config. You might try there.
Did it already,no success...
TomasNM said:
Did it already,no success...
Click to expand...
Click to collapse
A couple questions:
1) Are you using the most updated version...3.2 i believe?
2) Did you soft reset immediately after making the changes?
3) What features are still remaining, that you're trying to get rid of and which ones have you managed to remove?
scotchua said:
A couple questions:
1) Are you using the most updated version...3.2 i believe?
2) Did you soft reset immediately after making the changes?
3) What features are still remaining, that you're trying to get rid of and which ones have you managed to remove?
Click to expand...
Click to collapse
1...I have installed previous version,will try the new one tomorrow
2...yes
3...as I wrote before...I want to disable finger scrolling and unbind the home/back keys from their default functions(I think/hope,they are related to TF)
TomasNM said:
1...I have installed previous version,will try the new one tomorrow
2...yes
3...as I wrote before...I want to disable finger scrolling and unbind the home/back keys from their default functions(I think/hope,they are related to TF)
Click to expand...
Click to collapse
I don't think the home/back keys are tied to touchflo, but you might be able to remap them using the key mapping in advanced config. I obviously don't know since i have a touch pro, but i know that some keys can be remapped using that program. Also i know that some of the updates in Advanced Config are related to changes that weren't sticking on the TP, so hopefully that's yoru problem.
Just to share: I tried all the above methods to disable Touchflo (finger scrolling) and it didn't work for me.
- unchecked scrolling in Settings -> Touchflo
- disabled touchflo scrolling using HTC Advanced Config
I got it working by doing the following:
Create a zero byte file and copy/overwrite the following files:
\Windows\Biotouch.exe
\Windows\Biotouch.dll
\Windows\StartUPBiotouch.exe
Now I am get my scribble pad (RemindMe / PhatPad) to work properly without the lag
Good luck!
patrickquek said:
Just to share: I tried all the above methods to disable Touchflo (finger scrolling) and it didn't work for me.
- unchecked scrolling in Settings -> Touchflo
- disabled touchflo scrolling using HTC Advanced Config
I got it working by doing the following:
Create a zero byte file and copy/overwrite the following files:
\Windows\Biotouch.exe
\Windows\Biotouch.dll
\Windows\StartUPBiotouch.exe
Now I am get my scribble pad (RemindMe / PhatPad) to work properly without the lag
Good luck!
Click to expand...
Click to collapse
Thanks,I will try it.
The method worked for me! My gosh, why so hard to diable it... but I'm glad it worked! Thanks patrickquek
Does anyone know how to stop the pop up keyboard? IN general it doesnt come up, except in OPERA, and man is it annoying. Ive tried a registry key change (hkey_current_user\control_panel\sip\allowchange), but it keeps changing back from 0 (i set) to 1 (the original) after I try to soft reset it to make it stick... Any clues?
gtkansan said:
Does anyone know how to stop the pop up keyboard? IN general it doesnt come up, except in OPERA, and man is it annoying. Ive tried a registry key change (hkey_current_user\control_panel\sip\allowchange), but it keeps changing back from 0 (i set) to 1 (the original) after I try to soft reset it to make it stick... Any clues?
Click to expand...
Click to collapse
Normally it will disappear as soon as you type a letter on the hardware keyboard.
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
+1 on KBNull plus Sip Changer.
However I still run in to the keyboard popping up when I am in Opera. It is true it disappears as soon as I start to type something but I would prefer it not come up at all even in Opera.
I may be wrong, but I believe Opera has it's own keyboard. I had a Touch Diamond for a while and I noticed that the font on the keyboard looked different while I had Opera launched. Also in landscape mode Opera has a completely different SIP from the device.
akadonny said:
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
Click to expand...
Click to collapse
A basically equivalent method I use is the install NullKB and use SKTools to set NullKB to the default input method.
Disable Keyboard on Treo Pro...
This is how I've done it.. Seems to work. I haven't had any problems yet.
HKEY_CURRENT_USER\ControlPanel\Sip
DWORD:
AllowChange - value:1 - change to 0
DragStyle - value:0 - change to 1
MenuBarHeight - value: 34 - change to 1
stevebrooks,
How do you get registry changes to stick??? Mine disappear on soft reboot. I've searched, and cannot find the answer!
Thanks,
Rich
try backing up the reistry and saving the changes so all will be restored when you restore the resgistry. just a thought
akadonny said:
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
Click to expand...
Click to collapse
Hello akadoony,
i know that this is not really the section to come with this question but could you assist with instructions how to extract and rebuild rom image for Toshiba G810?
i appriciate also if you can direct me to other website.
Tnx.
Ran.
richsnuc said:
stevebrooks,
How do you get registry changes to stick??? Mine disappear on soft reboot. I've searched, and cannot find the answer!
Thanks,
Rich
Click to expand...
Click to collapse
Not too sure why your registry is reseting. Mine is not. I did have a similar problem with registry resets on my Vogue. I ended up switching the Rom for a different one and never had the problem since. Sorry buddy.. No solution for you.
so uh, i just flashed the new ROMeOS2 to my fuze......i installed a few things, namely the updated "video drivers" to give me a better frame rate w/ the hologram. The advanced settings program and the diamond tweak and TF3D config programs
anyhoo....after installing the video drivers and changing a few settings in advanced settings and diamond tweak, my start menu is now garbled/fuzz.
if i press where i think a link would be it becomes clear and you can see the quicklaunch/programs/settings/etc etc.
i tried deleting advanced config and diamond tweak to see if that would help w/ the issue to no avail.
help is extremely appreciated
damn, no ideas at all?
ive also had some issues with landscape mode and text not showing up ANYWHERE
are these custom roms just that problematic or did i do soemthing wrong?
whitesox311 said:
so uh, i just flashed the new ROMeOS2 to my fuze......i installed a few things, namely the updated "video drivers" to give me a better frame rate w/ the hologram. The advanced settings program and the diamond tweak and TF3D config programs
anyhoo....after installing the video drivers and changing a few settings in advanced settings and diamond tweak, my start menu is now garbled/fuzz.
if i press where i think a link would be it becomes clear and you can see the quicklaunch/programs/settings/etc etc.
i tried deleting advanced config and diamond tweak to see if that would help w/ the issue to no avail.
help is extremely appreciated
Click to expand...
Click to collapse
You have to go into advanced config 3.3 and click on User Interface then change Animate menus from yes to no (disabled), save and soft reset. After re-boot your start menu should operate properly.
HAAALP?
californiarailroader said:
HAAALP?
Click to expand...
Click to collapse
It's a White Sox thing - they don't speak very good English down there.
climber1872000 said:
You have to go into advanced config 3.3 and click on User Interface then change Animate menus from yes to no (disabled), save and soft reset. After re-boot your start menu should operate properly.
Click to expand...
Click to collapse
THANK YOU THANK YOU !!
yaw on the souf side we dont speak enrish goodly
whitesox311 said:
THANK YOU THANK YOU !!
yaw on the souf side we dont speak enrish goodly
Click to expand...
Click to collapse
No problem. I was a bit noobish at once...hell I still am.
emesbe said:
It's a White Sox thing - they don't speak very good English down there.
Click to expand...
Click to collapse
Lol Oh, okay
I have an HTC Ozone running a stock ROM.
I am trying to modify some icons in some of the HTC CHome plug-ins.
I change the value for the icons in the registry to the path of the icon I want.
After a soft reset the icons I pointed to appear briefly but soon revert back to the originals, and when I check the registry the values are back to the original as well.
This only appears to happen in the registry key \HKLM\Software\HTC\HTCHome
Other icons entries are in the key \HKLM\Software\Microsoft\CHome and the changes I make there stick without any problem.
Is there a way to change this behavior?
Try looking @ hklm/security/CHome as well. Some stock settings are backed up there, and I believe they'll over-write your changes on re-boot.
Zdoes the Ozone run the CMGuardian service? I know my Imagio does and it needs to be disabled in order for manual registry changes to stick.
y0himba said:
Zdoes the Ozone run the CMGuardian service? I know my Imagio does and it needs to be disabled in order for manual registry changes to stick.
Click to expand...
Click to collapse
What is this, and how do I disable it?
Farmer Ted said:
Try looking @ hklm/security/CHome as well. Some stock settings are backed up there, and I believe they'll over-write your changes on re-boot.
Click to expand...
Click to collapse
The only entries for any of the HTC plug-ins in that location are a "GUID" entry
brent372 said:
The only entries for any of the HTC plug-ins in that location are a "GUID" entry
Click to expand...
Click to collapse
I don't have the \HKLM\Software\HTC\HTCHome registry keys; are you on a stock rom or something? Nor do I have any of the HTC plugins. I guess you could try to delete the reg keys in the security branch of the registry (back them up first in case this doesn't work so well). Then put in your paths where you normally do it and soft reset.
Hi All!
I'm looking for all options for sms in the phone registry.
Some Reg tweak for sms sounds???
My problem: when i get a text message, it cames without sound, even if every setting is ON for sounds.
I'm using 2.53.479.3 WWE HTC (02/01/10) ROM with radio 4.49.25.91.
Can anybody help me? I don't know what's the problem, it seems just for me...
When you choose your sounds does play when you hit the play button?
Seems like it would be a sound file issue.
Yes it plays, when i hit the play button. Play every sample and mp3s, but when i receive an sms...there's no sound...
...and this problem only for receiving sms... every other notification sound (alarm, email, etc..) works perfectly. I dont want to do a Hard Reset...
Here is the SMS reg key.
You can either modify this key and install it or open to view the path in your registry.
Thanks, i'll try it!
Bruce Inman, thanks for sharing. I tried your solution but it didn't work for me. Could you please explain all the edits in the registry:
Code:
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
@="Message: New message"
"AvailableOptions"=dword:00000000
"Duration"=dword:00000005
"Options"=dword:00000003
"Wave"="\\Windows\\SMS.wav"
"SMS.wav" - what do you mean by that? I don't have this file in my Windows folder...
Please, need the solution to this problem desperately. Thanks in advance.
Didn't work for me either
Loprty said:
Bruce Inman, thanks for sharing. I tried your solution but it didn't work for me. Could you please explain all the edits in the registry:
Code:
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
@="Message: New message"
"AvailableOptions"=dword:00000000
"Duration"=dword:00000005
"Options"=dword:00000003
"Wave"="\\Windows\\SMS.wav"
"SMS.wav" - what do you mean by that? I don't have this file in my Windows folder...
Please, need the solution to this problem desperately. Thanks in advance.
Click to expand...
Click to collapse
nickfranky said:
Didn't work for me either
Click to expand...
Click to collapse
You will need to change the WAVE file in the registry to whatever .wav file you have.
I was just supplying the reg settings for you to confirm your own.
Bruce Inman, I changed my path to \Windows\Rings\Alarm-VeryHigh.wav, but still no sound, nothing, only the green LED. There still might be an error somewhere...
Try putting the file directly into Windows folder.
If it still doesn't work, I hate to say it but... I think a Hard Reset is the only thing that will fix your issue.
Sorry.
Loprty said:
Bruce Inman, I changed my path to \Windows\Rings\Alarm-VeryHigh.wav, but still no sound, nothing, only the green LED. There still might be an error somewhere...
Click to expand...
Click to collapse
Hey Loprty!
We got the same problem, i don't know what cause this, but we can check something, what programs do U install to the device?
....and the landscape mode didn't work fore me either for programs that used to.
IE, Opera, etc..
Didn't find the solution, so had to Hard reset it. After that the sound and vibration work again, and the system is more stable now.
check HKCU\software\microsoft\inbox\settings\smsavailable=1
Loprty said:
Didn't find the solution, so had to Hard reset it. After that the sound and vibration work again, and the system is more stable now.
Click to expand...
Click to collapse
I did the Hard reset too. ... but you won't believe this:
After HR, everything is fine, sms sound work again. But after i installed my programs, the sms sound gone away again...
I installed this programs, in this order:
-Microsoft My Phone
- NeoS2007 driver pack
- CHT Editor
- CookiesHome Tab
- Google Maps
-Total Commander
- Microsoft NET CF 3.5
- .Net Configuration
- Miri MP3 Trimmer
- Samsung Midomi
- Hoots Extra Camera Moods
- HTC TD2 SoftReset
- m6 Taskbar WM6.5
- CoreCodec Player
- CommManager8
- PDA Poker Art
- Hibby Fart Machine
- Ganondolf Experiment 13
- Southend XTRAKT
- hdWobble
- Opera Mini 5 Beta
- MS Marketplace
Its a joke i thing, I DO NOT KNOW which program cause this problem!!
bnm7bnm said:
check HKCU\software\microsoft\inbox\settings\smsavailable=1
Click to expand...
Click to collapse
This is OK. The value is "1" there...
nickfranky said:
This is OK. The value is "1" there...
Click to expand...
Click to collapse
Try not installing "NeoS2007 driver pack"
AFAIK, this is not being supported anymore so you probably have a driver incompatibility issue.
Bruce Inman said:
Try not installing "NeoS2007 driver pack"
AFAIK, this is not being supported anymore so you probably have a driver incompatibility issue.
Click to expand...
Click to collapse
Problem solved.
Hungarian manila files caused the problem. Switch back to english, and everything works fine. I'll try different hungarian translation pack for this version of Manila...
Thanks 4 everything!
Try This
trying pushing the volume button on the side then select the system tab at the top then turn the volume up