Does anyone know how to stop the pop up keyboard? IN general it doesnt come up, except in OPERA, and man is it annoying. Ive tried a registry key change (hkey_current_user\control_panel\sip\allowchange), but it keeps changing back from 0 (i set) to 1 (the original) after I try to soft reset it to make it stick... Any clues?
gtkansan said:
Does anyone know how to stop the pop up keyboard? IN general it doesnt come up, except in OPERA, and man is it annoying. Ive tried a registry key change (hkey_current_user\control_panel\sip\allowchange), but it keeps changing back from 0 (i set) to 1 (the original) after I try to soft reset it to make it stick... Any clues?
Click to expand...
Click to collapse
Normally it will disappear as soon as you type a letter on the hardware keyboard.
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
+1 on KBNull plus Sip Changer.
However I still run in to the keyboard popping up when I am in Opera. It is true it disappears as soon as I start to type something but I would prefer it not come up at all even in Opera.
I may be wrong, but I believe Opera has it's own keyboard. I had a Touch Diamond for a while and I noticed that the font on the keyboard looked different while I had Opera launched. Also in landscape mode Opera has a completely different SIP from the device.
akadonny said:
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
Click to expand...
Click to collapse
A basically equivalent method I use is the install NullKB and use SKTools to set NullKB to the default input method.
Disable Keyboard on Treo Pro...
This is how I've done it.. Seems to work. I haven't had any problems yet.
HKEY_CURRENT_USER\ControlPanel\Sip
DWORD:
AllowChange - value:1 - change to 0
DragStyle - value:0 - change to 1
MenuBarHeight - value: 34 - change to 1
stevebrooks,
How do you get registry changes to stick??? Mine disappear on soft reboot. I've searched, and cannot find the answer!
Thanks,
Rich
try backing up the reistry and saving the changes so all will be restored when you restore the resgistry. just a thought
akadonny said:
Install both Sleuth's SIP Change and Beemer's Null Keyboard.
After BeemerNullKB.cab the Pro should ask you to soft reset.
Open SIPChange and choose NullKB.
I've tried several other ways using the registry, but all cause problems. This is the best way and it doesn't constantly use any resources. SIPChange just run's once at startup and that's it.
Big thanks to Beemer and Sleuth. I should link to their threads, but just to lazy to search again. Sorry
Click to expand...
Click to collapse
Hello akadoony,
i know that this is not really the section to come with this question but could you assist with instructions how to extract and rebuild rom image for Toshiba G810?
i appriciate also if you can direct me to other website.
Tnx.
Ran.
richsnuc said:
stevebrooks,
How do you get registry changes to stick??? Mine disappear on soft reboot. I've searched, and cannot find the answer!
Thanks,
Rich
Click to expand...
Click to collapse
Not too sure why your registry is reseting. Mine is not. I did have a similar problem with registry resets on my Vogue. I ended up switching the Rom for a different one and never had the problem since. Sorry buddy.. No solution for you.
Related
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
ori_lavee said:
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
Click to expand...
Click to collapse
Hi Ori,
I dont have the kaiser yet to tell you for sure, but I think this will work for you http://forum.xda-developers.com/showthread.php?t=321605
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
austinsnyc said:
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
Click to expand...
Click to collapse
He is using EZdial on his diaer, and it dosent fit on the Kaiser dialer.
hi shay and austinsnyc
thanks for trying to help
shay is right it is not possible to use EZDail on the default dialped.
since the default dialped that comes with the original ROM on the Kaiser is also a SKIN
it is not possible to disable it by editing the registry and install a different skin because the original skin always have preference
i need to find a way to disable the default dialped deeper than only editing the following registry velue :
HLM > Security > Phone > Skin > Enabled to 0 from 1
Ori
someone ?
ideas ?
nobody have a clue for me how can i do it
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
very god!!!
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
dalewinterstein said:
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
Click to expand...
Click to collapse
spot on my friend! much appreciated! i do agree that without skin it is faster and what's more important for me it is so much more usable!
thanks!
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
RPG0 said:
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
Click to expand...
Click to collapse
yes that is the problem
well not for me as I'm not using video calling but i can imagine it is a serious limitation nevertheless
I was just checking in to see if there was a new dialer perhaps that looks like the one on the touch - like the one in the attached jpg in the first photo?
Thanks
Dutty's newest ROM for the Tilt has almost that exact dialer.
Thank you very much! I don't use speed dial but the person who asked me if I could find one complained that speed dial disn't work afterwards - do you know if I just wasn't doing something right.
predo said:
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
Click to expand...
Click to collapse
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
sebbes said:
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
Click to expand...
Click to collapse
Thank you, it works. Now I have a DialPAD I like. After custom ROM I got a Touch DialPAD which somehow missing the Speed Dial key pad.
Was the same for me, and I didnt like the blue background for reading the smartdialer's matching entries
I've updated the Tilt keyboard fix to address the apparent issue with the Smartdialer keys also being incorrectly mapped when flashing a non AT&T ROM onto the Tilt. This will also fix the FN character issues being incorrectly mapped too.
This was tested on a Tilt flashed with the (current) HTC ROM and worked perfectly.
Install -> Soft Reset
Enjoy!
IMPORTANT:
Some people have reported that this cab didn't fix their Smartdialer issue. It's important that you uninstall the older cab that was posted here (if you even installed it), then soft reset. Then install the new one and soft reset one more time. That should do it.
Do not unzip/decompress this .cab file on your desktop and move the files over to your device. It won't work. You need to copy the .cab (as is) onto your device and tap to install.
Great job thx.
Thanks!
This is great! Any tips on how to accomplish the reverse...if someone say, wanted to put the Tilt ROM on their Kaiser?
roameo said:
This is great! Any tips on how to accomplish the reverse...if someone say, wanted to put the Tilt ROM on their Kaiser?
Click to expand...
Click to collapse
Remove the registry key and soft-reset.
Code:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CWSLayout"=dword:00000001
roameo said:
This is great! Any tips on how to accomplish the reverse...if someone say, wanted to put the Tilt ROM on their Kaiser?
Click to expand...
Click to collapse
You "should" be able to just navigate to:
HKLM\HARDWARE\DEVICEMAP\KEYBD and delete CWSLayout, then soft-reset.
EDIT: Dang, Pof beat me to it.
Awesome. Thanks guys!
gret work
i got the tilt at 12 today and took it home and startedripping it apart, I put the htc rom on with msvc 1.6, live search, the nice battery icon and the home plug-in customizer, thats it, on my hermes i needed so maney things to make it function, i like the tilt now that the keyboard is fixed.
damn i can not edit the title, well crap
Excellent Work
TaurusBullba said:
This was created by myself and sirsycho. This will fix the FN character issues when flashing a non-ATT carrier ROM on the Tilt.
Install -> Soft Reset
Enjoy!
Click to expand...
Click to collapse
What exactly does it do?
Thanks,
g
gregross said:
What exactly does it do?
Thanks,
g
Click to expand...
Click to collapse
When you flash the HTC ROM (or any non-ATT ROM) onto the ATT Tilt, some of the alternate (FN) characters on the keyboard are mapped incorrectly. This fixes that.
TaurusBullba said:
When you flash the HTC ROM (or any non-ATT ROM) onto the ATT Tilt, some of the alternate (FN) characters on the keyboard are mapped incorrectly. This fixes that.
Click to expand...
Click to collapse
oh ok - thanks. Is that a registry update?
Was curious becuase i couldn't find and "...\qwerty" entries in the registry.
gregross said:
oh ok - thanks. Is that a registry update?
Was curious becuase i couldn't find and "...\qwerty" entries in the registry.
Click to expand...
Click to collapse
It is a registry entry. I was originally looking for the same "qwerty" entry (like in the 8525), but instead the following was the culprit:
Code:
[HKLM\HARDWARE\DEVICEMAP\KEYBD]
create - CWSLayout - value (1)
TaurusBullba said:
It is a registry entry. I was originally looking for the same "qwerty" entry (like in the 8525), but instead the following was the culprit:
Code:
[HKLM\HARDWARE\DEVICEMAP\KEYBD]
create - CWSLayout - value (1)
Click to expand...
Click to collapse
ahhh - i have a feeling there will be many registry differences from 8525 to 8925....
Thanks for the knowledge
reitjam said:
i got the tilt at 12 today and took it home and startedripping it apart, I put the htc rom on with msvc 1.6, live search, the nice battery icon and the home plug-in customizer, thats it, on my hermes i needed so maney things to make it function, i like the tilt now that the keyboard is fixed.
damn i can not edit the title, well crap
Click to expand...
Click to collapse
which HTC rom did you put on it? Got a link to it? I think it's time to de-ATT mine.
robroth said:
which HTC rom did you put on it? Got a link to it? I think it's time to de-ATT mine.
Click to expand...
Click to collapse
Not hard to find, it's stickied in this forum.
TaurusBullba said:
Not hard to find, it's stickied in this forum.
Click to expand...
Click to collapse
Already downloaded that one, but I just wanted to make sure that's the one to use on the 8925. Better safe than sorry with something so new .
Keyboard fix
How do I install this?It keeps showing up as a xml file that opens the web browser
bigthingspoppin215 said:
How do I install this?It keeps showing up as a xml file that opens the web browser
Click to expand...
Click to collapse
You're trying to install it from your computer, don't. Move it over to your phone using activesync then tap to install.
bigthingspoppin215 said:
How do I install this?It keeps showing up as a xml file that opens the web browser
Click to expand...
Click to collapse
its a cab file, try right clicking and save/as. stick it on your PPC and then run the cab. it worked fine here.
I have a bit of an issue when on phone mode. This fixes the FN issue, but doesn't fix the caps issue when on the phone mode. I'm trying to search for a name and the W is a Q, T is a V, there is no S, D is a F, and so on...
Hi ppl. I want to get rid of all TF functionalities from TP,that means TodayPlugin,Scrolling,etc...which is a part of that rubbish. Could anyone point me,how to do that? I think that Hardreset without installation of that cab can be the way,but I don't know,where to find all other cabs shipped(as ExtROM). Next thing...if someone wants to make a test after hardreset to interrupt the cabs installation procedure to disable that,I want to know,if the home/back keys will lost also their default functions without installation...someone to try it(I don't want to hardreset just for test)? If these things will be successfully for me,I will do that. Thanks.
I think it's start menu, settings, then something to get to a menu where there's a check box next to TF3D, and uncheck it.
Thanks for your tip,but I am afraid,you misunderstood my question. I want to disable EVERYTHING,that is 'extended' by the TF,not only Homescreen. Especially touch scrolling(HTC's solution is very lazy,I want to use SPB PocketPlus) and home/back keys functions(I want to handle them with AEBPlus). Simply I want to have a kind of lite ROM without any TF functionalities.
goto Window\StartUp\ and remove the .exe for touchflo
n copy it to some other folder. finally softreset...
I have deleted all of them,those were there as default(AutoShortcut.lnk,HTCStartUp.lnk,PKG.lnk,poutlook.lnk and Services.lnk),but it doesn't help absolutely. I have in startup some shortcuts,but they are known things(Chronos,AEBPlus,GPRS Monitor,auto-SIP script). No TF shortcut is presented,even I see all files in system including hidden/system.
TomasNM said:
I have deleted all of them,those were there as default(AutoShortcut.lnk,HTCStartUp.lnk,PKG.lnk,poutlook.lnk and Services.lnk),but it doesn't help absolutely. I have in startup some shortcuts,but they are known things(Chronos,AEBPlus,GPRS Monitor,auto-SIP script). No TF shortcut is presented,even I see all files in system including hidden/system.
Click to expand...
Click to collapse
You should be able to disable touchflo scrolling using Schap's Advanced Config. I don't have a TP, but i know the settings are in Advanced Config. You might try there.
Did it already,no success...
TomasNM said:
Did it already,no success...
Click to expand...
Click to collapse
A couple questions:
1) Are you using the most updated version...3.2 i believe?
2) Did you soft reset immediately after making the changes?
3) What features are still remaining, that you're trying to get rid of and which ones have you managed to remove?
scotchua said:
A couple questions:
1) Are you using the most updated version...3.2 i believe?
2) Did you soft reset immediately after making the changes?
3) What features are still remaining, that you're trying to get rid of and which ones have you managed to remove?
Click to expand...
Click to collapse
1...I have installed previous version,will try the new one tomorrow
2...yes
3...as I wrote before...I want to disable finger scrolling and unbind the home/back keys from their default functions(I think/hope,they are related to TF)
TomasNM said:
1...I have installed previous version,will try the new one tomorrow
2...yes
3...as I wrote before...I want to disable finger scrolling and unbind the home/back keys from their default functions(I think/hope,they are related to TF)
Click to expand...
Click to collapse
I don't think the home/back keys are tied to touchflo, but you might be able to remap them using the key mapping in advanced config. I obviously don't know since i have a touch pro, but i know that some keys can be remapped using that program. Also i know that some of the updates in Advanced Config are related to changes that weren't sticking on the TP, so hopefully that's yoru problem.
Just to share: I tried all the above methods to disable Touchflo (finger scrolling) and it didn't work for me.
- unchecked scrolling in Settings -> Touchflo
- disabled touchflo scrolling using HTC Advanced Config
I got it working by doing the following:
Create a zero byte file and copy/overwrite the following files:
\Windows\Biotouch.exe
\Windows\Biotouch.dll
\Windows\StartUPBiotouch.exe
Now I am get my scribble pad (RemindMe / PhatPad) to work properly without the lag
Good luck!
patrickquek said:
Just to share: I tried all the above methods to disable Touchflo (finger scrolling) and it didn't work for me.
- unchecked scrolling in Settings -> Touchflo
- disabled touchflo scrolling using HTC Advanced Config
I got it working by doing the following:
Create a zero byte file and copy/overwrite the following files:
\Windows\Biotouch.exe
\Windows\Biotouch.dll
\Windows\StartUPBiotouch.exe
Now I am get my scribble pad (RemindMe / PhatPad) to work properly without the lag
Good luck!
Click to expand...
Click to collapse
Thanks,I will try it.
The method worked for me! My gosh, why so hard to diable it... but I'm glad it worked! Thanks patrickquek
Useful Things
Colored Taskbar
Please install sideskirt first.
Ahens colored task bar. M6 is also good and nice.
Automatic Wallpaper Changer
Install in your device and launch the program and follow instruction.
Page pool Changer is used before flashing the CUSTOM ROM. http://forum.xda-developers.com/showthread.php?t=295932
Some other useful Utilities I used may be it will be helpful some of us also!
OFFICIAL UPDATE for TOUCH 2http://www.htc.com/hk-en/SupportDownload.aspx?p_id=291&cat=0&dl_id=779
RAM CLEANER- Auto update to get new version.
AUTOMATIC WALL PAPER CHANGER.
PAGE POOL CHANGER Link: http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
MS VOICE COMMAND 1.60.4622 http://www.mediafire.com/?ninmm2mwjny
SKYPE FOR WINDOWS MOBILE http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
M6 COLORED TASKBAR http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
DICTATION RECORDER(NETCF3.5 Required) by riaysoft http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
NO DIAL on ROAMING Prevents DATA (GPRS) when you are Roaming.Softreset after installation install on your device!!!
http://www.mediafire.com/?mtz2eztobgj
FINGER KEYBOARDhttp://www.mediafire.com/?1jdjjmmm1m1
SMS Filter for SMS Backup and many more http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
CHECK IT OUT NICE BOOT SCREEN http://forum.xda-developers.com/showthread.php?t=589655
SMS Notification http://www.mediafire.com/?sharekey=cf60b91509117eeed1014a7a667fa2b4c3fbb3b38cd419b53e34c0a955f98962
LED LIGHT NOTIFICATION ON YOUR SMS AND CALL http://forum.xda-developers.com/showpost.php?p=5668375&postcount=27
Bug in link: "MS VOICE COMMAND 1.6 Link: http://www.mediafire.com/file/...1.6Diamond.cab"
Ygrek-Ix said:
Bug in link: "MS VOICE COMMAND 1.6 Link: http://www.mediafire.com/file/...1.6Diamond.cab"
Click to expand...
Click to collapse
it is ok now!!!
Can you write what exectly version of MS VOICE COMMAND 1.6 you have? ie. 1.6.21725. This can be found in config of voice command. Thanks
Ygrek-Ix said:
Can you write what exectly version of MS VOICE COMMAND 1.6 you have? ie. 1.6.21725. This can be found in config of voice command. Thanks
Click to expand...
Click to collapse
if u have installed u will find the version! anyway it is 1.60.4622
Hi guys,
None of these seem to work right on my touch2, the battery icons and gps change but the signal and windows buttons I cant do. None of the things on the web quite have it. I might be missing something obvious but replacing the dll's and renaming them doesnt seem to make a difference.
wildmurphy said:
Hi guys,
None of these seem to work right on my touch2, the battery icons and gps change but the signal and windows buttons I cant do. None of the things on the web quite have it. I might be missing something obvious but replacing the dll's and renaming them doesnt seem to make a difference.
Click to expand...
Click to collapse
what did u install? all of the things I posted works on my touch 2.
Hi Rdelsol,
I've tried to install Voice Command and several other different .cabs and when I try to open/install the cab file absolutely nothing happens. I've tried double clicking it, tap and hold then Open but still nothing happens. Am I missing something or doing something wrong?
Phone is a Touch 2 T-Mobile UK.
Thanks,
Mick
buellzebub said:
Hi Rdelsol,
I've tried to install Voice Command and several other different .cabs and when I try to open/install the cab file absolutely nothing happens. I've tried double clicking it, tap and hold then Open but still nothing happens. Am I missing something or doing something wrong?
Phone is a Touch 2 T-Mobile UK.
Thanks,
Mick
Click to expand...
Click to collapse
hi mick it is working perfectly with mine! did you install in your device?
after installation you have to softreset.
Thanks for the fast reply!
I tried a soft reset first then tried again and it worked ok.
Thanks again,
Mick
Hi,
I tried to install all Colored task but all of them causes problems with startup keyboard (for PIN code).
J.
will post new items soon thanks
Hi All!
I'm looking for all options for sms in the phone registry.
Some Reg tweak for sms sounds???
My problem: when i get a text message, it cames without sound, even if every setting is ON for sounds.
I'm using 2.53.479.3 WWE HTC (02/01/10) ROM with radio 4.49.25.91.
Can anybody help me? I don't know what's the problem, it seems just for me...
When you choose your sounds does play when you hit the play button?
Seems like it would be a sound file issue.
Yes it plays, when i hit the play button. Play every sample and mp3s, but when i receive an sms...there's no sound...
...and this problem only for receiving sms... every other notification sound (alarm, email, etc..) works perfectly. I dont want to do a Hard Reset...
Here is the SMS reg key.
You can either modify this key and install it or open to view the path in your registry.
Thanks, i'll try it!
Bruce Inman, thanks for sharing. I tried your solution but it didn't work for me. Could you please explain all the edits in the registry:
Code:
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
@="Message: New message"
"AvailableOptions"=dword:00000000
"Duration"=dword:00000005
"Options"=dword:00000003
"Wave"="\\Windows\\SMS.wav"
"SMS.wav" - what do you mean by that? I don't have this file in my Windows folder...
Please, need the solution to this problem desperately. Thanks in advance.
Didn't work for me either
Loprty said:
Bruce Inman, thanks for sharing. I tried your solution but it didn't work for me. Could you please explain all the edits in the registry:
Code:
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
@="Message: New message"
"AvailableOptions"=dword:00000000
"Duration"=dword:00000005
"Options"=dword:00000003
"Wave"="\\Windows\\SMS.wav"
"SMS.wav" - what do you mean by that? I don't have this file in my Windows folder...
Please, need the solution to this problem desperately. Thanks in advance.
Click to expand...
Click to collapse
nickfranky said:
Didn't work for me either
Click to expand...
Click to collapse
You will need to change the WAVE file in the registry to whatever .wav file you have.
I was just supplying the reg settings for you to confirm your own.
Bruce Inman, I changed my path to \Windows\Rings\Alarm-VeryHigh.wav, but still no sound, nothing, only the green LED. There still might be an error somewhere...
Try putting the file directly into Windows folder.
If it still doesn't work, I hate to say it but... I think a Hard Reset is the only thing that will fix your issue.
Sorry.
Loprty said:
Bruce Inman, I changed my path to \Windows\Rings\Alarm-VeryHigh.wav, but still no sound, nothing, only the green LED. There still might be an error somewhere...
Click to expand...
Click to collapse
Hey Loprty!
We got the same problem, i don't know what cause this, but we can check something, what programs do U install to the device?
....and the landscape mode didn't work fore me either for programs that used to.
IE, Opera, etc..
Didn't find the solution, so had to Hard reset it. After that the sound and vibration work again, and the system is more stable now.
check HKCU\software\microsoft\inbox\settings\smsavailable=1
Loprty said:
Didn't find the solution, so had to Hard reset it. After that the sound and vibration work again, and the system is more stable now.
Click to expand...
Click to collapse
I did the Hard reset too. ... but you won't believe this:
After HR, everything is fine, sms sound work again. But after i installed my programs, the sms sound gone away again...
I installed this programs, in this order:
-Microsoft My Phone
- NeoS2007 driver pack
- CHT Editor
- CookiesHome Tab
- Google Maps
-Total Commander
- Microsoft NET CF 3.5
- .Net Configuration
- Miri MP3 Trimmer
- Samsung Midomi
- Hoots Extra Camera Moods
- HTC TD2 SoftReset
- m6 Taskbar WM6.5
- CoreCodec Player
- CommManager8
- PDA Poker Art
- Hibby Fart Machine
- Ganondolf Experiment 13
- Southend XTRAKT
- hdWobble
- Opera Mini 5 Beta
- MS Marketplace
Its a joke i thing, I DO NOT KNOW which program cause this problem!!
bnm7bnm said:
check HKCU\software\microsoft\inbox\settings\smsavailable=1
Click to expand...
Click to collapse
This is OK. The value is "1" there...
nickfranky said:
This is OK. The value is "1" there...
Click to expand...
Click to collapse
Try not installing "NeoS2007 driver pack"
AFAIK, this is not being supported anymore so you probably have a driver incompatibility issue.
Bruce Inman said:
Try not installing "NeoS2007 driver pack"
AFAIK, this is not being supported anymore so you probably have a driver incompatibility issue.
Click to expand...
Click to collapse
Problem solved.
Hungarian manila files caused the problem. Switch back to english, and everything works fine. I'll try different hungarian translation pack for this version of Manila...
Thanks 4 everything!
Try This
trying pushing the volume button on the side then select the system tab at the top then turn the volume up