i like some of the today screen programs with shortcut icons that you can use to access your most used programs, i tried trials of both phoneAlarm & Spb Pocket Plus. i have a sx66 through cingular, and my question is, through either of these 2 programs or any other programs is there a quick way to turn off the phone? thanks...
Try this file.
Worked for me quite well on my magician.
I have it combined with tdlaunch to launch application out of the today screen.....
it only disables my radio, never turns it back on. is this suppose to do both?
Yes it should. For me on my magician it´s working.
First run -> turning it off
Second run -> turning it on
Stefan
Here's a link to another program that does the same. There's a similiar program for turning on/off bluetooth.
http://www.aditusnet.it/crino/crisoft/prodotto.asp?id=6
thanks jabberwock, this program works without any problems, and does exactly what i need it to do. thanks again...
Hi,
I’m new to WM6 (and Cruise) but used a WM5 for many years. I’ve got email set up on ‘check every 30 min’ which works fine for me. However, the HSPDA (on Three network in Australia) stays connected and I have to press ‘Disconnect’ manually…in the WM5 it used to disconnect after finishing checking for emails…any ideas how to configure it to disconnect when finishing send/receive emails?
Best,
GHOZ
Download the program Band Switch. There is a option called Close idle conns which should (not sure) close the connection after being idle for some time.
Cheers,
Svante.
on WM5 it works fine...are you sure you need an extra app for that? thanks for the assistance.
Best,
anyone else is having the same problem? or it just me? using IMAP email....
Dont worry i have the same problem...apperently is it a WM6 thingie
That’s a bit disappointing…going to WM6 a losing functionality ;- ) ?!?
Also KaiserTweak has option to disconnect after idle period along with loads of other tweaks, only snag on Polaris is that after using it and resetting device it will have disabled the touch screen - but quick visit to the Settings/Screen app to re-align screen will resolve it - then on next reboot will all be fine.
Hi,
Got a HTC pharos today in replacement of a touch (broken, change by orange many times last month but since they only provide crappy refurbished mobiles....). Pretty satisfied so far. I don t miss htc cube that much... I don t miss Wifi yet (only use it when on holidays, that is to say almost never muhaha). GPS is nice... No more bluetooth head to carry in my already too full pockets.
So, let's start with my problem). It has a built in GPS, just like the cruise. After toying a bit with my new phone... and after I have configured the gps, I have noticed that a GPRS connection is launched each time I launch the GPS (TomTom that I had to install since those stupid techs from orange thought it was good to remove from their rom and replace by by their ****ty home made navigator).
Have you noticed that kind of connection. Do you know how I could prevent this (even though it doesn't cost me a buck, since I have set a blank GPRS by default). Could be a thing or two that could be modified in the registry but cannot find it yet...
Sorry I post in the cruise section but there is no pharos section yet (please Admins.... listen to my prayer)
your phone may have "assisted" GPS (AGPS) enabled, thats why it is attempting a data connection. This feature is designed to locate you faster when the satelite signals are week.
You may/may not need a registry editor to disable this feature...
That phone does have aGPS, if you don't want it trying to grab a data connection go to Start/ Programs/ QuickGPS select Menu/ Options and de-select the "Auto download when data expires"
I find that if you use the GPS daily you don't need the aGPS data, it will work just as well without. Also TomTom itself could be requesting the data connection if you have enabled any of the Plus services - Mike
right ...
AGPS = Assisted GPS
HKLM/Software/HTC/SUPL AGPS/EnableAGPS
1 = on
2 = off
http://ghisler.fileburst.com/cebeta3/tcmdpocket25_armpubbeta3.exe
its a free file commander / reg editor / ftp client .... all you need
Hi
Thank you for your help. Couldn't find the quick menu so I edited the registry like Aleph305 said. Working perfectly. Now the GPS starts a few seconds after I launch TomTom.
I do not use plus services so I will not miss AGPS a lot.
This took me a while, but I finally figured it out through trial and error. I know there are a few options out there for tethering, but this has always been the preferred way to tether when I was using the Diamond. It's wireless, you can initiate the connection from the PC, and it gives you better battery life than WMWiFiRouter or HTC Wifi Sharing. Best of all, you DO NOT need to initiate a DATA connection on the phone before connecting to your PC! Just fire up the BT DUN connection on your PC, click Dial, then browse the web!
Here's how we do this:
Install DotFred's TaskManager
Click select Menu, Tab Options, Select Tab, Services. Find "CM Guardian", click and hold until menu pop up and select "Set Manual".
Make the following changes on your TP2 with a Registry editor:
1. [HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll"
2. [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
3. [HKEY_LOCAL_MACHINE\Software\OEM\Wmodem]
Check Profile=0
Connected=0
Multi-NAI=0
WModemDUN=0
4. [HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\DUNServ er\ControlPanel]
Enabled=1
That's it! Re-pair your TP2 to your PC and BT DUN should be available as one of the services. Create a new DUN profile on your PC, leave username and password blank, and set dial number as #777. Click dial and you should be able to connect... just like old times.
Thank you so much for posting this. I have been ripping my hair out over this. However, I am on Verizon and thus my HTC Touch Pro2 has somewhat different entries in the registry than Sprint does. Does anyone know how to get DUN working with the HTC Touch Pro2 on Verizon? I bought a laptop specifically with Bluetooth just to use my phone as the modem but cannot get it working for my life.
After I did all the registry edits I could that you mentioned (even though all of them were not available since I'm on a different provider) I noticed when I try to dial out for a SPLIT second I will see "Dial Up Networking" listed under Bluetooth services. Windows promptly gives me a dialing error and that service on my phone disappears.
Anyone can give any pointers?
I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?
foldog22 said:
I don't have a Service called "CM Guardian". I have a custom ROM, would that make a difference?
Click to expand...
Click to collapse
Yes, some Rom chefs may have eliminated this service. I know MightyMike left it in his Rom, but I have not tested others on the TP2.
KD8FRE
Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?
Thanks for this.
foldog22 said:
Would this service be in WM6.5? If I download MightyMike's ROM would it be in there or is it only in WM6.1?
Click to expand...
Click to collapse
MightyMike's Rom does indeed have CMGaurdian. I cannot speak for other TP2 Roms, but his does.
KD8FRE
Can anyone give any pointers on getting this to work on the Verizon version of the phone? Been searching high and low!
There is no "CMGaurdian" on my phone. I did a full search for it and it's nowhere to be found. I have the stock Windows Mobile 6.5 rom. But it looks like without being able to set that as manual, I have to change the registry everytime I end up having to restart my phone. But even when I do that, it still goes back to phone as modem after a few minutes instead of staying on Sprint.
Awesome!
Thanks for the info. The connection sharing wasn't working for me anyway.
Just an FYI, you can optionally edit the registery to set the CMGuardian to Manual.
Open a reg editor and navigate to [HKLM\Services\CMGuardian]
Locate the Index key and change the value from 2 (default) to 1.
So anyone on Sprint TP2 with 6.5 stock rom actually got Wmodem to work? I've spent about 24 hr trying just about everything with no luck so far.
I made all the above reg changes, have WModem v02 installed on my TP2. Activate the wmodem prog, connect to computer with usb cable. When i try to connect on my computer, it stucked on verifying user name and pass. There is some sort of data connection going on on the phone itself, but the computer connected to the phone couldn't seem to go pass that "verifying user name and pass"
Much appreciated any help or comment. Thanks
Just wanted to add that I found this thread useful, got the registry entries and made a cab for it. This is for Sprint only! Download, install, and go, no need for registry editing!
Problem tethering via Bluetooth DUN to pspgo
Ok, I am pulling MY hair out on my ATT tilt 2. I am trying to use my fone as a bluetooth modem for my pspgo.
It seems that my Tilt 2 receives the data from the pspgo, but its not sending any data to the pspgo, when I test the connection the tilt2 receives about 9-16 bytes, but it says sent: 0 bytes.
I have energyROM july 16 2010 WWE winmo 6.5
Manilla 2.5.20161332.0
Build: 23563.5.5.0
I have seen vids of people doing this on the Raphael (FUZE) and other phones
I keep getting this connection error on my psp: (8030000B) I have tried so many dial #'s, changing settings, PDAnet,
I think the problem has something to do with:
it being WinMo 6.5 or
The custom ROM has disabled something in the Bluetooth or
Since the ROM is custom, the psp wont recognize this for some reason because just like the WIFI router; the carrier doesn't know I'm tethering. or
I have the wrong Dial-up # or
Authentication settings or Initialization command is wrong or
I need to use a Proxy network
Some other reason ( The ROMS BT stack) whatever that is lol
Does anyone have this or similar problem? Or know whats happening here?
Any help would be awesome!
Thank you
Worked Perfectly
After making the changes you suggested, this worked perfectly on my TP2. It's so funny, after I initially got my TP2 and tried it, I instantly gave up. Now that I'm a month away from going to a new carrier, and most likely a Sony Ericsson Xperia X10, I got really interested in getting this working. It was a breeze using the Resco Explorer Demo with included Registry Editor.
TP2 Stock WM6.5
Doesnt work for me. I dont have CMGuardian.
I went ahead and edited the registry anyway and still didnt work even after rebooting.
I'm hoping someone can help figure this out... Trying to tether with my new Xoom!
Thanks a lot defcon6, I was looking for this some time ago, but no look, but know, looking for some other thing i found it, thanks again
Same here, stock 6.5 rom and no CMGuardian. Did you ever figure this out?
Never mind, I did run the cab from pengc99 and it worked fine. After soft reset of the phone, it never got out of the "modem negotiating" state but running the cab again fixed it. Now if I just could find the equivalent to CMGuradian I would be all set but this is at least working.
Bluetooth setting to ALWAYS ON?
Thanks to this thread and the pengc99 file, I successfully (quite some time ago) paired my TP2 via the bluetooth to a Nexus 7 tablet as well as an android phone, but each time I turn on the phone, I have to go through the following steps:
1. Select Communication Manager
2. Turn ON the Data Connection
2. Click on Bluetooth
3. Select one of my paired devices, such as the Nexus 7 by clicking the large "+" icon
4. Select Bluetooth Networking
5. Select the "Share Internet Connection" option
6. Click Continue on the bottom
I tried various registry edit searches here and on google, but cant' find any way to lessen these steps or preferably have the Bluetooth sharing set to ON at all times. If anyone knows how to simplify this process, please post the stops or file that will help us all.
Thanks in advance
Hi all,
I've programmed a nifty tool voor auto disabling gprs after a period of time. I couldn't find an app which auto disconnects gprs/umts for WM 6.5 so I made my own. It's still version 0.1 but works wel. .NET CF 3.5 is needed. If something doesn't work please mention it so I can change/repair it. It was tested and developed on a HTC Touch2.
Have fun
Winmohtc6
Nice tool..... Not to create double threads but you can put it aswell in the general section Windows applications..... http://forum.xda-developers.com/forumdisplay.php?f=528
I own a Touch 2 and i've installed this app on my sd card (.Net 3.5 it was installed). I've checked the second option (search gprs on start data connection) and set the timer to 60 seconds. After reboot, i started data connection from comm manager, updated weather on homepage but even after 3 minutes, the gprs connection did not stop.
No other apps autoconnect this time.
What did i do wrong ? Or can you explain how did you tested it ? (I'm sure it works on your device )
Hmmm strange. I've tested it with autoconnecting gprs and not with manual connection via comm manager but that may not be a problem (in my opinion). I'm working on version 0.2 at the moment. It includes the option that the time stamp you save will be shown in the combolist after restart and it includes soft reset of the smartphone for applying settings. I'm working on it
Tested few minutes ago with gprs autoconnection.
Steps: reconfigure app, soft-restart phone, manual e-mail check for starting gprs. Connection is still alive and i didn't touch the phone 3 min till the screen turned off.
If it helps: ROM: 1.28.479.4 (66092), phone was bought unlocked (gsm operator free). If you need another specific hardware info, please tell me.
I'll wait for 0.2 version.
I appreciate your work.
Ops
Please share with us the registry keys that you change )
If wanted I can share the source code (vs vb.net 2008) . Send me a private message with emailadres and I will email it to you. I'm thinking of switching to OpenNetCF because it has more (and in my opinion better) references for programming on mobile devices.
Source code
Winmohtc6 said:
If wanted I can share the source code (vs vb.net 2008) . Send me a private message with emailadres and I will email it to you. I'm thinking of switching to OpenNetCF because it has more (and in my opinion better) references for programming on mobile devices.
Click to expand...
Click to collapse
Thanks And the phone disconnect GPRS .. but no one knows when