1.60c wm5 problem... - MDA II, XDA II, 2060 Windows Mobile 2005 Upgrading

i used the the 1.60c wm5 for 1 week, then i faced the following problem:
1)sometimes when the device turn off, i can't turn it on again using the power button, so hav to soft-reset
2)when the device turn off, i can't receive sms or call....
tat is the serious problem for me, anyone using this version of wm5 also facing this problem? any solution? .....other than tat , 1.60c wm5 is working perfectly, i really like to use the wm5.....thanx

hi
hi
i have the same version 1.60C for more the 1 month its working perfect
exept for others 3 party software
whats your radio version ???
try to put the 1.08 version
and check
Sacaman

i am using radio version 1.18....is the radio version will affect the problem which i mention above(problem 1)....thanx

Related

Problem with Phone Volume

Hi there,
I have updated my O2 XDAII to the following:
ROM 1.72.00WWE
Date 03/15/04
Radio 1.17.00
Protocol 1337.28
ExtROM 1.72.126
Everything is fine and my BT GPS is running great (using Medion Software??).
The problem is the phone volume keeps on going on mute so i can't use the phone at all, the device volume work fine and i can adjust the level, and get alarm notification.
(I had Zenphone installed ?? but the problem still there after un-installing it .. I don't know if it is relevant)
any idea please before I Hard reset it??
Thanks
SOLVED .. by Hard Reset
Still don't know the cause, I'll have to reload all the programs and see
WHO DID IT :twisted:

- Prophet goes on automatically with WM6 & WM5 !!!

Hello,
I have a G4 with the following
IPL 2.10.0001
SPL 2.20.0001
I had upgraded to WM6 (tested all versions available on this forum).
Upgrade always goes fine and mobile works OK except that the phone goes on (screen lights up) automatically from time to time and goes off after time out (depending on setting, 10sec, 30sec etc..)
This eats up the battery very quickly.
I have tested with AKU 3.2 and AKU 3.3 (Aserg) and I have the same strange behaviour.
I have also tested with and without the following:
1. SD card
2. Mail server configured
3. Push mail
4. Different version of RADIO rom.
Of course with several hard and soft reset but no luck.
Anybody having such issues or heard about this.
Thanks for your help or suggestions.
I am forced to go back to the following....
Current versions
GSM 2.47.21
ROM 2.20.7.34 WWE
Strange!!! I'm the only one having this problem.
I just tried to flash with the lastest ASERG ROM and the issue is the same
It doesn't happen if you lock the device. This is the only solution I have found which works. Apart from that, it is fantastic.
i had the same..
what i did is turn off the backlight dimmer
had the same with my wm5 sometimes too
rob_h said:
It doesn't happen if you lock the device. This is the only solution I have found which works. Apart from that, it is fantastic.
Click to expand...
Click to collapse
Thanks rob_h a lot for the tips....
It works fine
I have extended your workaround by using vijay555 devicelock (http://www.vijay555.com/?Releases:VJDeviceLock) and assign it to a button.
It is a fair workaround.
Thanks again

Got a GPRS disconnect problem on WM6 ROM

Anybody known the issue of GPRS disconnect by itself when the device (Dopod 818) is the standby mode for a long times? (if I need to turn-on GPRS, I must Reset device or off-on the radio again).
I face this boring problem when I used ROM WM6. Not occur on WM5 ROM. How I can fix this problem? Anybody can help?
Thanks a lot for every post and advise.
Check the newest Radio Rom
ํYes, current I using Radio 2.69.21 but the problem still remain....
cpc said:
ํYes, current I using Radio 2.69.21 but the problem still remain....
Click to expand...
Click to collapse
Which WM6 ROM did you installed?
Is that such a big problem to you? You may in line of more surprises from WM6. How about WiFi on/off not stable? How about missing calls? Check out BT with different head sets yet? How is the incoming sound volume adjustable?
You may want to stay on WM5 and read more on this forum and find out which WM6 ROM you want to install. They come with different favors!!!

Universal + WM6 + WiFi

Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM

bluetooth issue - unable to run

hi there,
I have a polaris rom: 3.13.405.0 WWE, radio: 1.59.42.15 25.85.30.07H
my regular nokia phone is broken so after some time I need to use polaris again
I have a issue with bluetooth - starting from within comm manager doesn't work at all ..
when I turn on bluetooth, after few seconds of "working", it switch ON for a short moment and then back OFF
is this a hardware issue? or is this a software issue? how can I check it? do I need to try to reinstall with another rom?
btw: wifi works, data over mobile works
any idea would be appreciated
cheers
Got same problem, rom M.Amine 2.0
It's ROM problem. I have simillar problems now, which were NOT present in previous ROM.
Probably Radio part is guilty...

Categories

Resources