Related
Help!
I have had my M3000 for about 8 months now and until recently it has worked fine.
Last week when I answered a call with it, the headset turned itself off after about 2 mins of talk time. The phone thought the headset was still connected and I had to transfer the call back to the phone, and end the call before I could do anything else. It is now doing this regularly.
I have re-bonded and the headset is fully charged (even tried it while connected to charger!)
I have also tried to run the headset against my pc (audio output) and this works fine.
The only thing I can think of is the battery in the 3000 losing its charge when connected to a phone, but when I charge it, it is ready in a matter of mins.
Anyone any other suggestions as to why the Headset powers itself off ?? Has anyone seen this behaviour before ??
Thanks in advance.
mine does the same mate its the platronics m3000 its crap and doesnt work well with the XDA2 use the bluetrek G2 they work great
Mine did the same, but I just noticed that the XDA2 was on Bluetooth Discoverable mode, when I switched to Bluetooth Connectable (On) it works fine
Thanks to all who have replied....
I have tried a few more things out :lol:
1) Logged an issue with Plantronics :wink:
2) Tried my BT Carkit which works no problem :lol:
3) Tried a Hard Reset - Works great afterwards :lol: until I install my apps
It has therefore got to be a problem with apps and rom version clash??
Those who have had similar issues with the Plantronics turning itself off after using it for more than about 1.5 Mins.... Do you have any of the following apps ???
Belkin IR Keyboard Drivers (Belkin WPDAK)
Fonix Voice Dial/ UK Roger
Microsoft Money
MTUX Ringtone X
Pocket Bluetooth Tools (1012)
RegKing
Sandisk WiFi
SBSH.NET Birth2Day/ Calendat Plus/ iLauncher
Scary Bears Check Notifi
Yishin Power Check
CDL - O2 Customisiation
Thanks,
Ian
Plantronics Bluetooth Headset
I also have the same problem. I also have a SanDisk wifi card (which on occasion also stops working causing me to hard reset) and Microsoft Voice Dialler and Pocket Breeze and a number of other plugins. The whole point of plug-ins is to use them! Any suggestions???
David
It gets worse!!
I have just tried the Widcomm stack on the XDAII.
Its probably me, but I just cant get the thing to pick up the headset when I make or recieve a call, so that was no use.
To uninstall Widcomm I had to do a hrad reset (Widcomm disables the sound after uninstallation for some reason - grrrr), and now the damm thing shows the same symptoms - even on a virgin hard reset device.
My only conclusion is that something changed in the last ROM to kill it. I'll wait for another ROM upgrade and see what happens then, but will now probably end up buying another headset.
Is anyone on 1.72 with a Plantronics that works??? :?:
Ian - Rom 1.72
Do you have the 1.72 Rom on the XDAII from the UK? I thought it wasn't out yet. Is it better than 1.60?
Re: Ian - Rom 1.72
pavid1 said:
Do you have the 1.72 Rom on the XDAII from the UK? I thought it wasn't out yet. Is it better than 1.60?
Click to expand...
Click to collapse
Yep 1.72 UK.
Its better than 1.6x but has still got issues with it - like needing to be hard reset every now and again (grrr). But BT is more stable and power drain is better.
Having just bought a an XDAIIi i was alarmed to find that tomtom does not run on it. What other options do i have for satnav software, i really like tomtom (from what i have used so far) and the traffic info is something i would like to be able to incorperate. Speed camera warning (currently using checkpoint) is a must.
suggestions and views greatly appreciated
TT5 works fine on my 2i.
With the phone turned on????? And making and recieving calls???
Confused as the tomtom site says that V5 is supported on the i, but if you search the tomtom site for questions in the support section, the i isn't mentioned
The odd problem with phone mast searching happened on my XDA as well as my 2i, but it isn't the 2i's specific fault. I was able to make and receive a call the other day on the way back from work TT5 running. Still not entirely sure if the storage card has anything to do with it as I'd always thought that was to blame for my woes - though if you dont show the POIs on the navigator map then it runs absolutely fine on any xda.
I had noticed the lack of mention on the TT website re the 2i as well, but I installed it no problems.
TT5 works perfect on my XDA2i with the pone switched on and i have tested it whilst powering off (TT5 running) Phone call made but havnt had the time to test for incoming call while TT5 is on.
I would 100% agree that the onl reason i see that TT5 wouldnt work would be the SD card as i have had major problems getting my old (Sent it back) SD card to work with most things,
It was a Cheapo 1gig card and as far as i can tell ... the XDA2i seems to have a problem with cards above 512mb , which is strange i admit but everyone has a problem with a 1Gig card and an XDA2i.
BTW i "borrowed" the 128mb card from my digital camera while i sent away my 1 gig card so that i could use tom tom 5 , and i have had not even one slow down or falure with the smaller card , where as the 1 Gig card would slow my XDA down daily on many occasions and sometimes worse.
Tom Tom 5 & XDA IIi
I have both the above products and they work perfect on a 1GB (Kingston) card, except when I make calls Tom Tom stops working after the call is ended. I had similar problems with Tom Tom 3 on both an XDA II & now the IIi. I find that if the phone is switched off or forwarded to voice mail everything is fine...
I have co-pilot 5 which works sweet - can have live traffic updates, download speed cameras and even finds house numbers in a street.
:idea: Are you sure your problems aren't related to using a BT headset whilst driving with a BT GPS receiver ??? Basically if u have a BT GPS receiver it will be 'dropped' by the XDA when u use a BT headset. I have this problem and wish I had just opted for a wired GPS receiver to avoid this problem :roll:
I'm told that this program will fix the problem http://www.angeltowns.com/town/bluetooth/ but I haven't tried it yet.
not actually tried to use the bluetooth head set yet, and anyway i have a wierd GPS, thanks for the info though.
I may see if i can try copilot 5, i'm just worried about forking out the cash and its no good, or i don't like it. I have read that the the route mapping is a bit dodgy on co pilot, is this true?
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi together,
after all my cruise is now working quite good, and even the odd bt-headset problem is solved after installing the two bt-patches (I´m using Bepe V.0.67).
But now: I can´t commander voice command while pressing the speak button of my Nokia BH-602 headset. This worked before installing the patches.
So: Headset works, but without vc function.
Anybody got a workaround for this problem? Than cruise is almost perfect for me.
Thanks
amcom
That function did not work with my Jabra BT3030 before and still doesn't after the hotfixes.
edit: actually on further mucking about it does work. I have both BT hotfixes installed and it now works.
voice commander now works with my plantronics headset but it never ever dials the right person.. I had a blackberry pearl before this phone and the voice dailing worked even when using a power tool, but the one on HTC sucks real bad
OEMAGW.dll
After patch, OEMAGW.dll chanched, 2x Bigger.
I also want to run MVC BTbutton
This for OEM progs working, but sounds out device speaker
"Path"="\\WINDOWS\\voicecmd.exe"
I found a solution, working for me. After reinstalling an original ROM without MS VC implemented I installed VC seperate. After that I installed a small programm called jetware mobile. This programm routes all signals to the headset.
So everything works fine now. I´m happy, hope you´ll be too!
amcom
Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.