Dear all:
As many of us having the problem when try to upgrade the device (Dopod, iMate etc...) getting a error no 150 said the the rom is not designed to this deivce..... Any one know how to solve it.
As I am using Dopod 828 Chinese Version, as now I try to upgrade it and the procedure are as bellow
1. Right click on the EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In ActiveSync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the MaUpgradeUt_noID.exe
7. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
8. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. In ActiveSync, click on file and connection settings and tick the USB connection.
12. Enjoy your new ROM
I am using ROM Version WWE_11200_550_11200
Any expert here can help me, thanks
Joel
Hi
simple. try a second time and ignore the errormessage. I have flash my 828 from chinese to WWE. thats works
http://forum.xda-developers.com/viewtopic.php?p=152891
Hello i read this theard on forum android serbia.In this theard we can se way for unlock telenor touch plus.I don`t know did can unlock and telenor one touch ot 990 this way. I please senior members to see this and say their opinions>, did is true and can we use for alcatel one touch ot 990.
How to unlock your Telenor Touch Plus.
1: Make a note somewhere in your IMEI number and the MAC / address you may need it later if you unlock after the WiFi does not work or you have any problems with the MAC address. Settings - About phone - Status IMEI Wi-Fi MAC address
2: Backup your phone using MyPhoneExplorer, or any other program because it deletes all the data (phonebook, messages, calendar)
3: Download the following files on your computer: OUK_P736VV1.0.0B13 21.04.2012. last official ROM (Default Stock ROM)
Kod:
http://files.podtwo.com/roms/stock/zte/blade2/OUK_P736VV1.0.0B13-update_signed.zip
TMV_Stock_Recovery – Stock Recovery
Kod:
https://www.box.com/s/6506d76c3edc2d468cad
TMV_Unlock - Aplikaciju za otključavanje
Kod:
https://www.box.com/s/00067a33efece7000f07
QPST program za Backup / Restore data
Kod:
https://www.box.com/s/03202f2b7e0412874954
(The program is used to backup phone settings, IMEI, MAC address)
4th Rename OUK_P736VV1.0.0Bxx-update_signed.zip to update.zip and copy to your memory card into the main directory.
5th Unzip all three archives (TMV_CWM_Recovery, and TMV_Unlock Install_QPST_FromGAF
.6th Connect phone to computer via cable. In the phone options enable USB Debugging option Settings - Application - Development - Debugging USB
7th Unpacked from the archive TMV_CWM_Recovery run install-recovery-windows.bat and wait. Stock recovery will be recorded and the phone will restart. This may take a few minutes. If you get <waiting for device> to mean that drivers are not installed properly and Windows did not recognize the phone. When all is finished turn off the phone (if you're able to extinguish it, just remove the battery).
8th Hold the Power button and Volume Down until you see the FTM on the screen.
9.From Install QPST unpacked the archive, run Setup.exe and install program
Backup through QPST:
First: Do backup your data as it is all erased.
2. Remove the archive and extract it and run setup.
Kod:
https://www.box.com/s/03202f2b7e0412874954
3. Put yourself in the recovery through a combination of buttons Power + Volume down button
4.Run QPST and mind you do in the bottom status bar, you have the option Server Running .... if you do not go to the Server and the server from the Run menu option. Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S1.jpg
5.Now add your unit. Go to the Ports tab and Add the new port.Choose USB / QC Diagnostic port and click OK.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S2.jpg
6. :Here you can view the list of ports you have chosen
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S3.jpg
7. Now click the Start menu and click on Clients Software Download.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S4.jpg
8.Backup tab, then on Browse, and save the file somewhere on your computer and press Start. When it is finished you will have all the settings of your phone taken.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S5.jpg
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S6.jpg
9. To restore the settings you go to the Restore tab. Over Browse button to open your settings and turn on Allow phone / file ESN mismatch, if necessary.
Picture
http://www.getandroidfree.com/GetAndV1.0/wp-content/uploads/2011/12/BackupUsingQPST-S7.jpg
10.When all this is done, turn off the QPST program, run from a folder TMV_Unlock Download.exe on Start to start unlocking. This process takes up to 10 minutes. When all is finished, return the settings from QPST program, described in the step above and you have the phone unlocked for all networks.
LOCK THIS.
Hi dejanxxxx!
Why need to download OUK_P736VV1.0.0B13-update_signed.zip? It is not used until the unlock process...
Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, any tips on how to over come the problem, keep the suggestions simple please
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear
Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, I have downloaded from the links from here http://forum.xda-developers.com/showthread.php?t=893948, from these links
3. Download MAGLDR 1.13 package from *HERE* and extract to an empty folder on your pc
4. Download a NAND Android ROM from *THIS* Forum and extract to an empty folder on your pc any tips on how to over come the problem, keep the suggestions simple please
I've followed the instructions, but keep failing at No3 ....
Please help, lol, and keep it simple lol
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear
If you're one of those who has never touched a windows phone before, this guide is for you.
Prerequisites: Windows Device Recovery Tool and internet access on your phone.
Warning
If you've updated to Win10 using insider and you're not getting any updates for fall creators update, follow the guide from start to finish. Don't skip to step 3 just because your phone is already on Win10. Having a carrier branded ROM can cause issues.
STEP 1: Flash unbranded ROM
Since AT&T never provided a version above 8.10.12393.890 and the insider program has been shut down, you must flash an unbranded ROM before you can upgrade to Windows 10. PHONE/SIM WILL NOT WORK, so if you care about receiving phone calls then don't bother.
1. Download an unbranded ROM here, "RM-915 VAR BR CV": https://www.lumiafirmware.com/model/RM-915/hwid/059S2X9
1b. Click 3058.50000.1424.0002
1c. Just download the ffu. You don't need anything else.
2. Open an admin command prompt, cd "%ProgramFiles(x86)%\Microsoft Care Suite\Windows Device Recovery Tool"
You might want to rename your ffu file to firmware.ffu to make it easier to type since you can't drag files into an admin command prompt.
3. type thor2 -mode uefiflash -ffufile "C:\SomeLocationHere\yourfile.ffu" -do_full_nvi_update -do_factory_reset -reboot
Where C:\SomeLocationHere is the location to the file, of course
3b. If your phone is stuck in flashing mode for some reason type "thor2 -mode rnd -bootnormalmode"
4. After it installs and reboots, set up the phone again. Yes it will be in another language. proximo means continue. You can probably get through the setup without too much issues. Aplicativos means it's installing the apps, just wait 15-30 minutes and it should be done.
5. Turn on airplane mode or it will reboot every 10 minutes. Yes, really. Head to settings, idioma, add "Ingles" or your preferred language, hold down, press the second option (move up), hold down on portugese, press the first option (remove), press the reboot button.
6. Head to the software update section and update your device. It will take an update for an update to show, so be patient! If it says there are no updates available after an hour, please message me or if you're feeling adventurous you can try with "RM-915 VAR APAC AU TELSTRA" instead of the Brazillian ROM.
STEP 2: Update to Windows 10
Make sure you've done step 1 so your software version is 8.10.14219.341 or newer, since you cannot use SOUP on an older version.
1. Get SOUP from this guide.
2. Double click run_en.cmd and follow the rest of the instructions.
STEP 3: Interop Unlock:
1. Unlock the bootloader, enable mass storage, and root using this guide. Yes, you can use the .ffu for Windows 8.1 to unlock your Windows 10 Nokia.
2. Go to settings, search developer, tap the result that says "For developers".
3. Set it to Developer mode.
4. Set the date back to a time before Nov 24 2018 and reboot. The Interop Tools cert expired so it won't install if it's past that date.
5. Download Interop Tools, extract it, then copy it to your phone's storage over USB.
6. Open the File Explorer app on your phone, navigate to the directory you copied over, and install the files in /Dependencies/arm. Note that there is no installation progress indicator so please wait 30 seconds-1 minute before installing the next one or the app will not install.
7. Install the InteropTools appxbundle.
8. Open Interop Tools, go to the interop unlock section
8b. DO NOT TAP THE STORAGE UNLOCK SWITCH!!! USB WILL STOP WORKING! (You can turn it back off anyways if you accidentally turned it on)
9. tap the interop unlock switches and restore NVDK. Your phone is now Interop Unlocked!
STEP 4: Update to Fall Creators Update
You need to make your phone appear as a Lumia 950 XL.
1. Open Interop Tools, go to the registry editor
2. Navigate to HKLM\SYSTEM\Platform\DeviceTargetingInfo
3. Change the values to the following:
PhoneHardwareVariant : RM-1085
PhoneManufacturer : MicrosoftMDG
PhoneManufacturerModelName : RM-1085_11302
PhoneModelName : Lumia 950 XL
4. Reboot
5. Check for updates
6. Update the phone (You might have to wait a few hours before any updates appear)
7. Repeat steps 5 and 6 until you reach 15063
If you ever want to change back, the original values are:
PhoneHardwareVariant: RM-915
PhoneManufacturer: NOKIA
PhoneManufacturerModelName: RM-915_nam_usa_228 (Your phone might be different, best to keep it backed up!)
PhoneModelName: Lumia 520
ZeroTheSavior said:
If you're one of those who has never touched a windows phone before, this guide is for you.
Installing Windows 10 Mobile:
Online update method:
1. Download the Windows Insider app from the store.
2. Follow the steps to register your account as an insider (if you haven't already done so).
3. Select Insider Fast. It should register your phone after a while.
4. Go to settings and check for updates. This step can take a very long time, so be patient and wait about half an hour. (It might even take days if the servers are running slow).
5. After waiting 1000 years for the update to appear, download and install.
6. Keep going to the settings app and installing any new updates that appear...
Offline update method:
Make sure you've done steps 1-4 of the online update so your software version is 8.10.14219.341 or newer.
1. Get update files from this guide.
2. Use the 2nd Generation\480x800 folder, then run iutool like the guide tells you.
3. After iutool copies all the files and says "Updating system" or such, go to settings -> check for updates to see the progress of the update installation. Now you just have to wait for about two hours for it to complete.
Updating to the latest (unsupported) version of Windows 10 Mobile:
First you must do the Interop Unlock, so scroll below and then come back to this section...
You need to make your phone appear as a Lumia 950 XL.
1. Open Interop Tools, go to the registry editor
2. Navigate to HKLM\SYSTEM\Platform\DeviceTargetingInfo
3. Change the values to the following:
PhoneHardwareVariant : RM-1085
PhoneManufacturer : MicrosoftMDG
PhoneManufacturerModelName : RM-1085_15217
PhoneModelName : Lumia 950 XL
4. Reboot
5. Check for updates
6. Update the phone (You might have to wait a few hours before any updates appear)
If you ever want to change back, the original values are:
PhoneHardwareVariant: RM-915
PhoneManufacturer: NOKIA
PhoneManufacturerModelName: RM-915_nam_usa_228 (Your phone might be different, best to keep it backed up!)
PhoneModelName: Lumia 520
Interop Unlock:
1. Unlock the bootloader, enable mass storage, and root using this guide. Yes, you can use the .ffu for Windows 8.1 to unlock your Windows 10 Nokia.
2. Go to settings, search developer, tap the result that says "For developers".
3. Set it to Developer mode.
4. Download Interop Tools, extract it, then copy it to your phone's storage over USB.
5. Open the File Explorer app on your phone, navigate to the directory you copied over, and install the files in /Dependencies/arm
6. Install the InteropTools appxbundle.
7. Open Interop Tools, go to the interop unlock section, and tap the switches. Your phone is now Interop Unlocked!
Click to expand...
Click to collapse
The first two methods do not work on Nokia Lumia devices isn't there any other method to get windows 10 on Lumia 520 without unlocking bootloader
Prateek Yadav said:
The first two methods do not work on Nokia Lumia devices isn't there any other method to get windows 10 on Lumia 520 without unlocking bootloader
Click to expand...
Click to collapse
For me for some
For me for some reason the 4 Registry keys exist and I still cannot update to 1709, i am on 1703 and i got error 0x80070273
i also change OEMInput.xml according to another guide, still no luck
its 6/2020 and maybe MS changed again something?
ant0nwax said:
For me for some reason the 4 Registry keys exist and I still cannot update to 1709, i am on 1703 and i got error 0x80070273
i also change OEMInput.xml according to another guide, still no luck
its 6/2020 and maybe MS changed again something?
Click to expand...
Click to collapse
I'll have a try with a RM-914 now in 2021, if I reach 1709 I'll be happy !!
ZeroTheSavior said:
STEP 1: Flash unbranded ROM
Since AT&T never provided a version above 8.10.12393.890 and the insider program has been shut down, you must flash an unbranded ROM before you can upgrade to Windows 10. PHONE/SIM WILL NOT WORK, so if you care about receiving phone calls then don't bother.
Click to expand...
Click to collapse
Is this a AT&T limitation that unbranded rom won't let you get sim working?