Related
HI all,
I have a ProWave car kit which runs the phone audio through the car radio. I can make a call perfectly but when receiving one I can hear nothing. I can only think that it's some problem with the Bluetooth.
I'm running ROM 1.12.00 WWE, Radio 1.12.10, Protocol Ver 1337.42 and ExtROM 1.12.171 WWE
Cormac
Why start another thread if there is already one with an All-in-one guide in it? Please search first before posting.
The thread that you referred to started by talking about phones modified with Modified/Bigstorage Roms but I never messed with mine and so, didn't read the post any further since I didn't think it was applicable to me.
C
Bluetooth has nothing to do with Big Storage ROM since BS is just a way of making use of the Ext ROM which is invisible by default in shipped ROMs.
In any event my problem still hasn't been solved. I downloaded the patch but no joy. Is the radio ver the part that controls the bluetooth in which case should I upgrade the radio to 1.13 and then run the patch on it ?
C
Yes, BT is within the Radio ROM. What patch are you referring to? I've been using Radio 1.13 for quite some time now without any problems. I never had problems also with Radio 1.12. In both cases I never installed any BT patch.
I installed the "Default_BTHUSB_PATCH_AKU26.CAB" file as referred to in other posts. Can I upgrade the Radio ROM to 1.13 without updating the main Rom ? Where would I find the appropriate ROMs ? Can I get a Radio 1.13 ROM on it's own ?
C
If my memory serves me well, that BT patch was for meant for very early ROMS like 1.06. Yes, the Radio ROM can be upgraded without touching the Main ROM. It's been 2 years since I did an upgrade, I think 3rd party programs already installed and data will be lost because the device must be in bootloader mode to install the radio upgrade. I haven't fully checked but most ROMs can be found in wm-gurus.com (registration required), so it is possible that the stand-alone Radio ROM is ready for download.
I've had a G3, but i am trying to help my cousin set hers up. I need to actually "downgrade" her radio rom because anything 2.25 and above doesnt allow to her text message (it keeps saying wait 15 seconds before trying again)
Do I need to use the shell tool to do a radio upgrade/downgrade, or do i simply just run the radio rom installer file?
Thanks in advance, i don't want to break my cousin's G4. Thank god i have a G3
I found that I could only run the 2.19 radio install after re-installing a fresh Cingular HTC ROM, install the radio by simply running the included installer "ROMUpdateUtility_Wizard_NoID.exe" that came with the T-Mobile one located in the forum, then re-install the WM6 image. Otherwise I got an invalid version error. For the most part, running the radio update won't mess up the base image, so there's little risk.
-Matt
i'm using radio version 2.61 on my G4, this works perfect.....
Pieter____ said:
i'm using radio version 2.61 on my G4, this works perfect.....
Click to expand...
Click to collapse
Thats because you aren't on Cingular (not sure if the OP is running Cingular but my guess is they are based on the description of the problem). Its well documented that WM6 ROMS on the Cingular network have issues with any rom with a higher version that 2.19.
So back to the original question... Yes as stated above, you can just flash it with the RUU Noid that comes with the radio only rom. Since its Radio Only, it will flash fine on a G4 and not brick the device.
I'm trying to create a factory standard HTC three uk rom as there doesn't appear to be one already cooked. I followed the wiki guides to dump and cook my rom. However when flashing it always fails at 25% any ideas? i have re-tried cooking and flashing several times, still same error.
info
The rom is wm6.0 and radio 1.27.15.32
before flashing i successfully flashed my device with L26's new throttle rom (beta 6)
Do you get an error message when it fails?
Thanks
Dave
sorry for the late reply i re-flashed tonight as i could not remember error, its error 262 "the rom update utility encountered communication errors during the update process"
Sorry to ask but, have you installed Hard SPL yet?
Dave
yes i ran hard spl version 1 before flashing, i have sucessfully flashed other roms just not the one i cooked
I've flashed several ROM's to my x7510, starting with Cmonex's 1st WWE ROM, followed by a few versions of Xacsx's ROM's, always going back to Cmonex's every so often.
After having installed one of Xacsx's ROM's, the keyboard layout changed from QWERTY to QWERTZ and I had to do a reg edit to correct it. I learnt from somebody here that QWERTZ is a german keyboard layout, which fits seeing Xacsx is german.
Now here's the strange thing - after having flashed a previous ROM with QWERTY layout, I still had the QWERTZ layout. The setting had somehow "survived" the flashing?
And it gets better. After having flashed Xstep's ROM, the phone on my device remained turned off and nothing I could do would turn it on. That is a MAJOR crisis for me! I flashed Cmonex's ROM again, to see if I could recover from that and hoping it was simply an error with the ROM.
Xstep's ROM has RealVGA built in and the default setting is 92 dpi.
After flashing Cmonex's ROM my device was running at 92 dpi, even though RealVGA is not installed! I had to install it just to change the settings back to 192 dpi.
And still the phone doesn't turn on!
Update:
The problems I experienced were down to two things:
1) I had flashed two ROMs that each contained their own extended ROM's in succession
2) Somehow I had messed up the radio on my x7510
THE SOLUTION:
1) Flash the extended ROM supplied by Cmonex, together with the matching ROM
1. customruu for x7510, grab it from attachment. use this to flash roms.
2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)
WWE (english) 19209: http://rapidshare.com/files/16043971...forATHE400.zip
WWE (english) 19217: http://rapidshare.com/files/16043113...forATHE400.zip
GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
CHT (taiwan chinese) 19209: http://rapidshare.com/files/15981958...forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/16967590...RUU_Signed.zip
+ extrom for 3.29.707: http://rapidshare.com/files/17304340...707_extrom.zip
make a mirror for others too please if you can =)
Click to expand...
Click to collapse
2) Flash the x7510 radio supplied by Xtep
I have repacked the radio for a x7510. You can download it from: http://rapidshare.com/files/191672003/x7510_Radio_1.58.rar
Click to expand...
Click to collapse
I have axcsx's WWE ROM loaded on my x7510 which I loaded after loading cmonex's 3.29 rom. To be honest I did not know that a QWERTZ keyboard existed, however, all of the keys on my keyboard keys appear to work exactly as one would expect - QWERTY fashion without any required registry fix.
I did download xtep's rom but I'm now not likely to load after your experience. I wish I had more technical knowledge to suggest a fix. cmonex posted after a long absence yesterday. Perhaps it worth a pm?
Still wonder why you had a keyboard issue and I don't?
I actually flashed ALL of Xacsx's ROM's at one stage or the other. I believe the problem started after I flashed version2 of his WWE ROM.
Time for an update:
The QWERTZ instead of QWERTY issue I believe was down to one of Xacsx's ROM's having over-written the extended ROM (he warned that it would).
I've downloaded Cmonex's HardSPL, WWE ROM and matching extended ROM, then flashed 1st the HardSPL, then the extended ROM and finally the WWE ROM.
As a result, I no longer get the 96 dpi upon startup, and the keyboard reverted back to QWERTY.
At least that's progress.
But, the phone still simply won't turn on and I get an error message about Device.exe
I'm hoping this isn't due to hardware failure and that there is a software fix for it, but time will tell.
NanoRuler said:
But, the phone still simply won't turn on and I get an error message about Device.exe
I'm hoping this isn't due to hardware failure and that there is a software fix for it, but time will tell.
Click to expand...
Click to collapse
It does not sound like a hardware problem. Have you tried searching at the Windows folder if you do have the Device.exe file? It might just be because of a missing file. I don't know the contents of the Ext ROM, but could this file be in there too. Maybe when you upgraded your Ext ROM, this file was not included. So everytime you perform a hard reset, since it is missing from the Ext ROM, it does not install to your device.
If the file is present in the Windows folder, maybe the registry is pointing to a wrong file.
Had a look and there is no DEVICE.EXE in Windows
your problems with the keyboard layout or 96DPI are dued to ExtROM. In the ExtROM of my ROMs I have added a configuration file to switch to 96 DPI, you have said before that Xacsx said something similar about QWERTZ layout.
The real problem is that Cmonex's ROM does not include ExtROM, so although you revert to his ROM, you still have the previous extROM (from Xacsx or mine). You also need to flash the official ExtROM released by Cmonex.
About the phone problem, I cannot help you. I haven't experimented that isue on my own x7510 (tested both WWE and ESN roms). Anyway, if is a ROM problem, it sould be solved by flahsing another ROM.
Device.exe is in XIP part of the ROM.
Yes, I've already re-flashed Cmonex's extended ROM, thanks Xtep.
To be honest I don't believe your ROM is to blame. I have reflashed Cmonex's extended ROM, then her matching WWE ROM, in that order and still I get the DEVICE.EXE error and still the phone won't switch on.
That pretty much tells me it isn't ROM related.
I've attached the log file (renamed to .TXT) to this post - any help is gratefully received!
It may be worth flashing the full HTC ROM, which incliudes ROM, ExtROM and Radio; once up and running again, you could then reflash your cooked ROM of choice.
Factory ROMsdo tend to fix some of these odd problems.
Hi Neil,
I was under the impression that's pretty much what Cmonex's plain vanilla WWE ROM + matching extended ROM was, which is why I flashed it.
Only thing I haven't done yet is reverting back to the stock SPL.
NanoRuler said:
Hi Neil,
I was under the impression that's pretty much what Cmonex's plain vanilla WWE ROM + matching extended ROM was, which is why I flashed it.
Only thing I haven't done yet is reverting back to the stock SPL.
Click to expand...
Click to collapse
I sugest you to flash a Radio again (I thin that version 1.58 in this thread is from x7510).
You problem is when you activate the phone and that is managed by radio.
Thanks Xtep - I think you're on the right track with your suggestion, but that radio won't flash to my x7510. It keeps failing with unsupported device error message.
Any ideas where I can get hold of a stock radio?
NanoRuler said:
Thanks Xtep - I think you're on the right track with your suggestion, but that radio won't flash to my x7510. It keeps failing with unsupported device error message.
Any ideas where I can get hold of a stock radio?
Click to expand...
Click to collapse
That is because this file is for Athena x7500.
I have repacked the radio for a x7510. You can download it from: http://rapidshare.com/files/191672003/x7510_Radio_1.58.rar
You are indeed a scholar and a true gentleman!
Xtep, I've got phone functionality back! Thanks a stack!!!
And right now I'm re-flashing your ROM!
Did that work NR?
If not, can you PM me- I may have a suggestion, but can't post in an open forum
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?