shipped ROM of Vodafone VPA Compact s
I have made a ROM Backup/Dump of my new "Vodafone VPA Compact s" by using aWizard. --Original ROM of Vodafone.
For some one it concerns and interest.
I have made it in two versions: .nba ROM for aWizard or myOs flashing; .nbf version for RUU flashing. You can choose different methods freely.
1. .nba (.nb) ROM by using flashing tool "aWizard" or "myOS" for G4:
It includes: vodafone-HTCLogo, vodafone-OS, vodafone-Radio and vodafone-ExtROM. all in filetype ".nba".
You can flash this ROM by using Prophet-tools such as MyOS or awizard according to right steps.
Download Address:
Code:
http://fileho.com/download/930d48588908/vodafone-VPA-Compact-s-Shipped-ROM.rar.html
Mirrors:
1a).
Code:
http://www.megaupload.com/?d=HMLHJTT3
1b).
Code:
http://rapidshare.com/files/22598551/vodafone_VPA_Compact_s_Shipped_ROM.rar.html
2. .nbf ROM by using flashing tool "ROMUpdateUtility NovendorID" for G4: click ROMUpdateUtility_G4.exe and then step by step.
2a). RUU ROM for Vodafone VPA Compact s (without Ext_Rom, IPL/SPL), you can copy the your own Ext_rom (or download the original EXT_ROM version of Vodafone from my post above--Download & Unzip/Unrar it you will see) to your PPC\extended_Rom by using software "Total_Commander" and run manuelly.
DDL:
Code:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
2b). Another original RUU ROM for Vodafone VPA Compact s (with Ext_Rom, OS, Radio/GSM, Splash,HTC Logo. Without IPL/SPL). You can config your own Ext_ROM by edit "config.txt" in file folder extended_Rom (Unlock & Unhide the Ext_rom first).
DDL:
Code:
http://fileho.com/download/2bfe31173626/RUU-G4-for-Vodafone-VPA-Compact-s.rar.html
For Backup & Emergency only, pls use it at your own risk!
YEAH MAN Thank YOU VERY MUCH
it was deleted though on the server already so could you upload it again on rapidshare or something?... thanks
Download URL updated!!!
This Rom:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
crashes my phone i have to reupgrade to 2.20 in bootloader mode.
€: http://www.megaupload.com/?d=HMLHJTT3 works but i cant flash the splash and logo. How shall i do it? The logo file is empty (0 byte, has someone a backup?)
This is Windows Mobile 5, isn't it?
i instaled this rom and i bricked my ppc... can you try first what are you uploading??? and yes it would be nice if we have vodafone original software just in case we need to take it back to the service, because of waranty.. thanks, but can you provide working version???
hi can i flash this Rom 4 my Prophet
i have Vodafone in silver
Vodafone vpa compact 1 ger
hello my dear is there any english rom for Vodafone vpa compact 1 ger
rom vesion 1.12.01 GER
Radio version 1.12.00
protokoll version 1337.42
ExtRom-version 1.12.161 GER
Windows mobile 2003 se
CPU intel (R) PX272
416 MHZ
thank you ver much
I try to flash my vodafone PDA 1615 (tytn II vodafone ITA), but the HardSPL dont install correctly.
When I on my PDA boot the boot loader standard 3 colors (whitout unlock CID).
I try to flash the original WWE HTC rom, but the flash program dont work whit my Tytn vodafone.
I try the mtty program but the PDA freeze on splash screen vodafon whit the radio and os version number on low-right of the screen.(the mtty freeze whit this text:
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x78C0, total sector=0x13A00
Storage start block=504, total block=1256
Total Bad Block in CE: 0
Erase physical block from 792 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
I search the vodafone ship rom but I dont find
help me please
and sorry for my english
lucadeejay
I also tried to flash other vodafone rom recostructed (UK, German, Spanish and Italian) whitout luck.
I use the mtty for see my right and I the "FF".
the boot loader write on 3-colors screen:
KAIS130
SPL-1.56.0000
CPLD-8
the command in mtty:
set 14 0
task 8
reset the device but load the bootloader
thx
luca
i`ve got a TORNADO and i wanted to flash it with wm6, just that i haven`t super cid it...
now i`m looking at a tri-coloured screen :
Tornado
IPL 1.00
SPL 1.0.0009
Tornado UI
when i connect it to the pc, it displays usb in the left down corner
terraterm works, it reads info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3B880000 Bytes
HTCSORG_0409 ‘©öIHTCE
but it doesn`t want to format BINFS
Cmd>format binfs
Not allow operation!
i`ve tried to flash from my sd-card .. but it doen`t work... even if i rename the flash..
found this great walkthrough... http://karhoe.net/content/view/21/1/#step8
but i really can`t find a solution for my problem
any ideas?
You have to make your Tornado SiperCID as Karhoe's walkthrough and preferably update your IPL & SPL. Maybe update Radio too....
i can`t make the super cid for the boot mode..
help..
also i`ve got another tornado, same spv c500 with the same cid code ..
but i cant save the flash with r2sd all command in ttermpro ..
r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
...
i`ve done it using the help from http://forum.xda-developers.com/showthread.php?t=319588&page=2
use the image from ftp://ftp.xda-developers.com/Uploads...Updates/I-mate
i had exactaly same problem i reinstall windows mobile 5 then super cid
Finally the long promised kitchen with dual language support (English/German) for the Tornado. It benefits from the experience I made with creating the Hurricane kitchen and is a merge from the (unpublished) bi-lingual older Tornado Kitchen and the one for Hurricane. It is still the same old OS Version as in my previous kitchen (and the one from NitroGenious) - but some things have improved:
put the kitchen anywhere in the path, no fixed path needed
support for German language in all system menus and applications, including all tweaks and OEM applications (as far as available).
full Direct 3D support (TI drivers work in this ROM)
full support for all 4 key devices and WMP with selectable keyboard driver
still memory tweaked as in the previous kitchen, but some files have been re-compressed without icon compression - to speed up explorer icon access.
The related batch for the _squeezer (UPX) was improved.
quirks left from previous kitchen have been resolved
some more tweaks
reorganized the OEM and SYS folder to have only true generic OS parts in the SYS folder - this should ease future OS porting
For the basic instructions and explanations, please read the older Tornado Kitchen threads my previous Tornado Kitchen and NitroGenious Tornado Kitchen.
For preparing yourself about what cooking is and get started with understanding what you do, look at my Beginners Guide to Windows Mobile (prepare for cooking).
The needed files are shared at mediafire. Make sure to push the "(i) Details" button on top of the list.
You also find a pre-cooked ROM with common content (e.g. NetCF 3.5), so you may want to try that before cooking yourself. Don't forget to format the BINFS correctly before loading the new OS.
The history is:
- Nitrogen Kitchen
- my older Tornado Kitchen
- my Hurricane Kitchen
- this kitchen
Future may be:
- Tornado cooking based on OSBuilder
- Typhoon cooking based on OSBuilder
- mind that Hurricane will not cook with OSBuilder
The ready-made ROM is shared at the same folder as the kitchen. To get a quick start you have to:
For a device that has never seen a custom ROM, download the file "tobbbie_prepare-flashing-(one-time-per-device).zip", unpack it to any folder and find the tools needed for accepting custom ROMs.
For an already Super-CID device, get the file "tobbbie_nk-default-eng_ger-corrected_WM6.zip", unpack it in the same folder as the other zip. Then:
Run "1 as.exe" and kill active Sync
Remove a memory card from the device if there is any inside.
Put the device in bootloader mode (switch off, then press and hold camera key while connecting USB) and connect to the PC
Run "2 mtty...exe" on the PC - you should see a "USB" button on the right of the pop-up coming after some time, press that. In the terminal window press enter to get a prompt. If the USB button is not there, make sure Active Sync is not running.
Enter "info 2" (no quotes) and press enter, you see some lines of feedback, there must be something with "HTC Super CID"
Enter "format BINFS 1c00000" (no quotes), enter - wait for completion
Enter "ResetDevice" (no quotes, UPPER and lowercase exactly as given)
Wait for reboot of device, you get the device in 3 color screen now again
close the terminal window (Ctrl-F4) or the whole mtty (Alt-F4)
Start "3 ROMUpdateUtility.exe" and follow instructions
...reserved for even more further info
I don't understand how to let work the german language on my phone. i download 3 package but i don't know how to begin.
Hm... seems like you have no background on mobile phones ROM update?
The reasons what to do and how to do it are explicitly described in my first kitchen thread in the first post: http://forum.xda-developers.com/showpost.php?p=5386878&postcount=1
Sequence is:
prepare the device that the current OS allows access to system resources that allow later to open the door for cooked ROMs (application unlock)
open the door for cooked ROMs (Super CID) -> this is permanent for this device
flash new ROM (can be any cooked ROM).
If you want the German ROM you find the .nbf file in the mediafire share listed in the first post of this thread.
Please report on your:
device:
actions done so far including results of each step
Hello,
but i do already all this steps with success and my phone works but only with english language.
i also load the german nbf file but its remain only the english language. in in the mediafire share listed, are so many files. What i need exactly? probaly i try it with the wrong file.
p.s. Sorry for my bad english. Im german
Then you are at 95% and miss the simple device configuration, go to:
Start: Settings
-> Regional Settings
--> Language: Deutsch
--> Locale: German (Germany)
There (if you like):
--> Long Date style: middle option (I patched the NLS for this to be available)
You get 2 infos to restart the device (for Language and for Locale), confirm with OK.
Then leave the settings with "Done".
Now press short power: select "Reboot"
Now you have set the device to German.
For Certain applications you may have to do the setting to German within the application, e.g. in CE-Commander - some do not have the option to switch to German.
I also do this. If i go to settings, i can only select the english language and not the German.
In Locale i can select Germany.
p.s. i used this file: tobbbie_nk-default-eng_ger_WM6.nbf
You have to load the correct .nbf file!
The folder where the romupdateutility.exe is located must only have ONE .nbf file contained, otherwise you cannot predict which will be loaded. Look up the first post in this thread for the right file.
Most probably you loaded the .nbf from the first released plain English ROM.
To load a new ROM you must:
1.) format BINFS <right size>, for the ROM located as listed it is "format BINFS 1c00000"
2.) ResetDevice -> Bootloader
3.) rumupdate... with right .nbf
CID Unlock is permanent, latest SPL and Radio as well - no need to repeat any of these actions.
All details are listed in the relevant ROM threads.
Sorry but i don't understand which right file you mean.
The needed files are shared at mediafire? There are 5 files with many folder.
please have patience with me
You managed to load the pure English ROM - that is a start and you seem to have succeeded with most tasks:
- CID Unlock is done: otherwise you would not be able to load a cooked ROM
- WM6 ROM is loaded: only English as Language Selection
You now only need to re-do the tasks to format the BINFS and then load the ROM to the device. In the FLASH folder you should delete the old .nbf file and replace it with the one in the ZIP here: http://www.mediafire.com/?vdsgjg13v9cfnsj.
Please look up post 2: http://forum.xda-developers.com/showpost.php?p=13176294&postcount=2
I have simplified some things and also corrected a minor bug in the ROM and kitchen that had the backlight stay on while mediaplayer was on playback.
great job, mate!
until here:
# Run "1 as.exe" and kill active Sync
# Put the device in bootloader mode (switch off, then press and hold camera key while connecting USB) and connect to the PC
# Run "2 mtty...exe" on the PC - you should see a "USB" button on the right of the pop-up coming after some time, press that. In the terminal window press enter to get a prompt. If the USB button is not there, make sure Active Sync is not running.
# Enter "info 2" (no quotes) and press enter, you see some lines of feedback, there must be something with "HTC Super CID".
everything ok.
in the windows appears:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3C8C0000 Bytes
HTCSSuperCID ' HTCE
But if i enter "format BINFS 1c00000" without quote, i have no completion.
cmd>format BINFS 1c00000
or i enter ResetDevice, my device dont reset.
What the error?
Remove the memory card from the device and then re-do the action.
You have a card of 1 GB in the device - you can find it here:
+StorageInit
***** user area size = 0x3C8C0000 Bytes
The device must not have a memory card inserted while doing these things.
I remove the memory card but i have the same problem:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
Cmd>format BINFS 1c00000
Cmd>ResetDevice
Cmd>
This is weird - what device do you have?
Did you update your SPL and Radio to the latest versions (as advised in the "...one time per device" ZIP)? What is the SPL Version on your device?
If i put the device in bootloader mode, there stand in the red color: Tornado IPL 2.00, Tornado SPL 2.00.0014. In the green color Tornado IU.
This is ok - as it should be for IPL and SPL. Now check the following while in bootloader mode connected to mtty:
try to enter just "format BINFS" <enter>
What is the result (should be ok after a short while)?
enter "format BINFS 123" <enter>
What is the result (should be an advice on the valid values as 123 is not a valid one)?
If the first one works, but the second does not, you can still load the ROM, however the free storage space (for installing programs) will be less than what it could be.
Again for curiosity: which Tornado device is that (O2 XDA phone or Qtek 8310)?
Hello,
this is the result:
Cmd>format BINFS
Cmd>format BINFS 123
Cmd>
i have a O2 XDA
thank you for the help
Hi, can someone tell me how to create these files from sboot.bin with an Hex Editor
1. fwbl1 bl1
2. bl2 bl2
3. el3_mon el3
4. bootloader bootloader
5. tzsw tzsw
Novi1.bin 0..0x1FFF (size 0x2000 or 8192 )
Novi_2.bin 0x2000..0x31FFF (size 0x30000 or 196608)
Novi_3.bin 0x32000..0x3dfff (size 0xC000 or 49152)
Novi4.bin 0x3E000..10EFFF (size 0xD1000 or 856064)
or can someone upload it? I am a REAL NOOB in writing,editing or anything else in Hex and bin files
I tried this one posted here,
https://forum.xda-developers.com/galaxy-s6/general/guide-repair-hard-bricked-devices-t3573865
But i never could upload more then the first Novi.bin file and after that i became a write fail.
Sorry for my english too, i am german.
Thank You very much