Database Info

ROM 1.06.116WWE

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

New Release: WM5 - ROM Kitchen

This is the old RK... I'm working on the new one...
Please go to: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
<<< Big thanks to mamaich for his tools >>>

Great Thanks :lol:

WM2K5 ROM KITCHEN
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.

Great job bepe keep working
The bug with buttons is very simple
go to registry key
\HKLM\Software\Microsoft\Shell\
and add key "Keys", then go to
\HKLM\Software\Microsoft\Shell\Keys\
and add key "40C1", "40C2", "40C3" and "40C4"
Thats ALL
P.S.
40C1 - calendar, 40C2 - contacts, 40C3 - record and 40C4 - camera

Re: WM2K5 ROM KITCHEN
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh

IIWPO integrated into Himalaya ROM
Bepe offers us the great option to integrate this well-known theft protection into our ROMs.
Just extract the attachment into DEV/OEM. Open 97bd8b8c-5fe5-4bb1-8ede-f55865d7baf8.rgu with wordpad. Put in your name as you will enter it in the 'Owner Information' as well as a MSISDN to where short message should be sent in case somebody modifies the 'Owner Information'. Rebuild.
Works as is only on German devices. Modify '\Windows\Autostart' in initflashfiles.txt to appropriate folder name of your language (e.g. '\Windows\Startup' in WWE).
df2jh

Is this method designed for the Himalaya only, or would it work for the Universal as well?

I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?
@thefunkunfaked
Sorry,
only Himalaya for the moment, next will by BA and Wizard.
Universal will by last because of the VGA resources (those make thinks difficult).
@df2jh
Wow.. great thanks, you are the first one building packages.
It’s the first time I hear about IIWPO nice app.

bepe said:
I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?.
Click to expand...
Click to collapse
Bepe: let me know how to make it , I will make it for you , PM me,
I had dump rom for Wizard , it used mamaich's tools . if I am right just replace each files for Himalaya right ps which rom you want for base ?
I had dump ruu_prodigy_1081002_104_10910_tmo_usa_ship
thanks.

Re: WM2K5 ROM KITCHEN
df2jh said:
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh
Click to expand...
Click to collapse
Is it possible to have the same for WWE AKU 2.3 rom ?
And again thanks to Bepe and all who contribute to this.

hi,Bebe,, very interesting and i am trying to make CHS 2.2 now.
all of them are perfect!
*Extract the DEV folder
*Extract one ROM to DEV
*Extract one OS to DEV
*Extract one LOC to DEV
*Extract all OEM Packages you need to OEM
*Run CreateOS.exe and click the button
*Run CreateROM.bat
and created the ROM nk.nbf!
Great! but this time i didnt make OEM addtional coz my initial test.
The i tried to Flash on to my Himlaya, now runnning
2.01a64MB WWE,
But when try to Flash,,country ID error was happen,
Before it never happen to me.
So i tried to change Country ID but still error.
Then tried to Flash another CHS ROM on to mine,
it can done.
Used same upgrade utility.
Do you have any idea why i can not flash?
Thanks,

Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?

bepe said:
Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
oh! now i can flash.......
thanks,

now i could flash and boot,
then came to "Screen Setting& Copy write (C)1996-2005" with sound.
After that, Stylus and Hard Button didint work,
so can not go ahead from this screen! :lol:
Dumped nk.nbf and checked drivers and files.
seems there.
whats wrong with me,,??
i created this rom too rush instantly.
should do carfully...i knew..
any way, i wll try with Mr,mWang made ROM tommorow.
Now 6:00 morning here.
i gonnna sleep!
Thanks!

You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.

bepe said:
You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.
Click to expand...
Click to collapse
Not only CHS also CHT too.is possible wince.nls different with others package ?

hi bebe
i am cheking each files, hope i can find some hints.

Hi There
i make the arabic Rom based on the 2.3 wwe and it work perfect i add somme other application on it from the eten resco keybord speed dial and ....
but i have sometimes that the pda hang and the are no way only the reset to solve it
i am checking the file too to know whats happand
but great job Bepe as usual
Sacaman

ActiveSync like WM2003?
My device now will be recognized as "PocketPC USB Sync" when connected via USB. That ´s the way WM2003 did it. It´s faster and more reliable than the WM2005 method via netwotk connection "Windows Mobile-based Device" and TCP/IP. Great, how did you manage that?

but we lose the network connection on it
now i can't surf on internet or connect the msn true the activesync
if somme one do it please advice
Sacaman

Extended Rom on Hermes

Has anyone been successful in getting the extended rom hack to work on the Hermes. The CAB file i downloaded and ran said sucessful but I still cannot see it in my explorer. Has anyone tried themanual registry hack?

Try this, it works on mine.

low405 said:
Try this, it works on mine.
Click to expand...
Click to collapse
How can the Extended ROM then be protected again ?

Try this registry hack to hide the Extended ROM again, haven't tried it, but just messed around with the cab a little bit and found this:
Code:
HKLM\SOFTWARE\Drivers\MSYSEXT
"Background"=0x0 (0)
"Foreground"=0x0 (0)
HKLM\System\StorageManager\Profiles\EXT_FLASHDRV
"MountHidden"=0x1 (1)
Let me know if it works

Problems with Extended ROM
Okay guys I have looked all over for a solution to my problem. A few days ago I tryed updating my ROM. I had a crash and thought I almost lost my TyTN. I was able to recover from Bootloader and save it some what. I can now update the ROM but every one I use does not allow me to see the extended ROM whether I use the program or the reg. Hack. Any advice on were to look or any Idea on what to do?

pof how can i do with wm6
thanks

Office for WM5 Smartphone

As above, just follow the link Would've attached it but it kept failing to upload. If somebody could download and then attach to a reply, I'll link to it in this post
LINK
Enjoy
Phil

PLZ, make a mirror on other file service! There is no possibility for russian users to download from this {censored} MEGA

Here is a link for those who cannot download from Mega,
http://rapidshare.com/files/30158140/OFWM5.cab.html

Did not install on my SDA. I think this is really for WM6. When you choose location to install it states "OfficeWM6 WCE.BY"

Worked fine for my 8310 running WM5. Your phone needs to be app unlocked.
Phil

working on my t-mobile sda running on qtek 8300 rom

excellent working on my i-mate sp5 storage card

It does work, I had forgotten that I just did a cold boot a couple days ago and did not appunlock from then. Thanks OP for the program.

It worked on mine ( for sure ), thanks for sharing it

Pocketword files?
Hi all, many thanks for sharing this, this is the only function I missed changing from wizard to tornado - much improvement over clearvue!
has anyone managed to get it to read pocketword .psw files?
OpenOffice will only convert its native sxw files to psw and I would really rather not have to change my default format change back to .doc
strangely, pocket exel files seem to work fine...
any help much appreciated
Robert

Hi!
Could someone please resend this file to RShare or upload here?
Many thanks,
JG

jm012a9749 said:
Worked fine for my 8310 running WM5. Your phone needs to be app unlocked.
Phil
Click to expand...
Click to collapse
who can I can my phone App unlocked????

thx for ALL these replies
I found.

the links are broken. can anybody supply a working ling?
thanks.

who can I can my phone App unlocked????
i have a i-mate sp5m, and it does not install some programs and says not enough system permisions.
help.

Need For Speed Undercover

Hi,
How to make the NFS:U that came bundled with my Blackstone work on Leo? I tried but and error prompt "Setup Error: Unable to install application. Please update your device ROM....etc etc...."
I'm currently on the latest ROM 1.66. It will wasted if I cant install this game to WM6.5 device.
Thanks in advance for any advice.

Boorick26 said:
Hi,
How to make the NFS:U that came bundled with my Blackstone work on Leo? I tried but and error prompt "Setup Error: Unable to install application. Please update your device ROM....etc etc...."
I'm currently on the latest ROM 1.66. It will wasted if I cant install this game to WM6.5 device.
Thanks in advance for any advice.
Click to expand...
Click to collapse
I've it on my leo, no problem installing it, so it's not waste time, unfortunatly I can't help you installing it couse as I said I've just run the cab without any issue

I have the same problem. But luckly, I found a green version and simply paste it in storage and run it from there. It support gsensor as well.

sso wanna share with us ??? can you ? where did you find it ?

sentiere said:
sso wanna share with us ??? can you ? where did you find it ?
Click to expand...
Click to collapse
They wont share it as technically that would be warez...
I would however have thought as you have purchased the game before, you would be able to go back to them and request the leo version?
I know most people have to edit the registry to stop a white out problem but it can be mended.