help!!!
my travel charger is not working!!!
but i can only charge the xda2 with my usb cable or cardle without ac plug in..........
anyone has any idea on this?
Hi,
i Currently have a mini BT GPS, which comes with a Y charging cable for the CAR, (One side is for the GPS, and the other side is 5v for pocket pc as in the picture)
i want an adaptor That will convert the ROUND 5v connector to mini USB.
THE picture here is of the 5v connector.
Couldn't find it on the NET...
Thanks for the Help.
I wonder if that would work.
I have a mobile PNA TomTom Device in my Car with a 12V (input) Charger. I realized that the PNA can also be charged by pluging it into the USB interface of my computer. The Jack is also a miniUSB. So the charger plug has the same connector. Am I right to assume that the Diamond has to be charged by a 5V (USB current) miniUSB interface?
So it may be possible to charge the Diamond with exactely the same charger from my TomTom device?
I don´t have the current output of the PNA charging device in mind but i assume that it also has to be 5V?
Is there a possibility that both connectors are differently wired? Or is the miniUSB of both standardized?
i dont have your tom tom device, but there are two standards. 6v and 5v. Make sure you check properly
The charging device from my TomTom has an output of 5V so i assume the pin occupation is the same and i can use it to charge my Diamond (to come).
Just to make some of you guys happy. You CAN actually use the TomTom car charging device to charge your Diamond.
Plug fits and power output is exactely the same as the original HTC car charger!
For me it saved spending 20€.
hello
i have one of those usb car charger output 5v 1000mA
i connected the usb cable to it but the phone is not charging! tough when i connect the phone to my pc USB it charger!
does it need something more to start charging? maybe a resistor between 2 pins like motorola's do? or what?
thank you
brogdan said:
hello
i have one of those usb car charger output 5v 1000mA
i connected the usb cable to it but the phone is not charging! tough when i connect the phone to my pc USB it charger!
does it need something more to start charging? maybe a resistor between 2 pins like motorola's do? or what?
thank you
Click to expand...
Click to collapse
I don't know. I use from nokia charger and it's work great. May be is the cable is not with the same output. Try with diferent one.
how do you use nokia charger? nokia does not have micro usb..?
please explain
brogdan said:
how do you use nokia charger? nokia does not have micro usb..?
please explain
Click to expand...
Click to collapse
nokia have micro usb on some of their phones... i'm not 100% sure which models, 6500 Classic, 6555, 8600 Luna, 8800 Arte i think...
i use a car charger from the orange shop
I think the Toshiba because of its USB host is very picky about the charger it uses.
I have tried 3 now!
No name brand - 5v 500ma. Charges the phone just fine....but doesn't charge it quick enough, when navigating etc, it uses more power than it can charge
Blackberry 5v 500ma - lovely long cable length, better than the one above but same problem.....just drains a bit slower!
Samsung 5v 700ma - cable a bit short but charges the phone fantastically and works just fine!
Edit - Most phones from most of the major phone companies will support charging through micro USB. I wish they kept with mini usb.....micro is too flimsy!!
problem sorted
TG01, as well as nokia car charger, need to have the Rx and Tx pins shorted (connected together). so i opened my car usb charger and shorted the Data+ and Data- (Rx&Tx) pins and now everything is fine. i can use the usb cable as data cable, and when i connect it to my car usb charger, it starts charging!
hope this helps
brogdan said:
problem sorted
TG01, as well as nokia car charger, need to have the Rx and Tx pins shorted (connected together). so i opened my car usb charger and shorted the Data+ and Data- (Rx&Tx) pins and now everything is fine. i can use the usb cable as data cable, and when i connect it to my car usb charger, it starts charging!
hope this helps
Click to expand...
Click to collapse
could we (ok me) get a picture of that please?
thanks in advance
cheers
Adam
your car charger should have a usb A connector like this
http://pinouts.ru/connector/4_pin_USB_A__USB_B__mini-USB_jack_connector.shtml
all you have to do is solder together pins 2&3
thanks bud - that was just what i needed to understand
cheers
Hello
I buyed 2 car charger on eBay for 4€ eatch
it works great and very cheap !
Mini to Micro USB Charger Adapter Converter
i use this adapter i bought in ebay for $1.78 USD, and it i can charge my TG01 anywhere- car, wall, PC - with micro USB charger or cable.
mini usb to micro usb
Hi, can anybody confirm that mini usb to micro usb convertor will charge the phone when connected to USB car charger, please? Thanks
valanxda said:
Hi, can anybody confirm that mini usb to micro usb convertor will charge the phone when connected to USB car charger, please? Thanks
Click to expand...
Click to collapse
Hi!!
Anyone can please say something!!!???
I really need a car charger.
(But I have 3 car charger and several HTC wall charger with mini USB
and I have one S200 for my private number/replacement for the TG01)
I bought from the ebay 1 converter (mini->micro usb) but don´t work in the TG01
(don´t have another phone with micro usb to test if the problem is in the converter or "tg01").
Can anyone share what converter I need to buy?
Thanks
For reference, I bought my wife a car charger for her Sony Vivaz from ebay, and it charges the TG01 just fine
Hi y'all,
I'm looking to buy some new chargers (wall charger, car charger) for my HD2 (not that this should matter, I guess it's something that applies for a lot of devices) but can't figure out which combinations of chargers & cables will really charge at 1A.
The combination of an iPod USB charger with a micro USB cable from my local store resulted in 'USB connected', and hence maxed out at 500mA. Recently also used a 1.2A car charger with a micro USB cable (both from dealextreme, being cheap =) ), and once again I got the dreaded 'USB connected'.
What do I have to buy or do in order to make my phone understand that it's not charging through USB (well, in a way of speaking) but through a wall charger?
Muchos thanks!
Edit: did some more research. Just short circuited the 2 center pins of my car charger, and now it's recognized as AC, whoo! I suppose this applies to all chargers, hence, question solved!