Related
Previously i had TomTom3.0 with BTHTools and a Holux BT GR230 GPS
and it worked fine.
I recently upgraded to ROM 1.72.00 WWE so i no longer needed BTHTools and it still works fine.
EXCEPT : When the GPS receiver is not found (BT turned off or GPS off or out of range), TomTom freezes or slows down terribly. This didn't happened with my previous rom/BTHTools)
upgraded to TT Navigator 3.03 and TT GPS 3.03 but that didn't help.
I found others reporting the same problem in other threads,( see Kim71 in http://forum.xda-developers.com/viewtopic.php?t=3341&start=350 ) but this specific problem was lost in the mainstream of those threads.
anything usefull will be greatly appreciated
The only way I found to get over this was to deselect the gps in tomtom before closing down each time, it would then need selecting if you wish to use bluetooth gps. If this wasnt done and bluetooth gps was switched off when starting tomtom the pda would slow to a crawl, I know it isnt a perfect fix but seemed to work ok for me.
the problem is you have selected the wrong com port in the gps setting (i have 3 to choose from on mine!) first uncheck the box on the left. then drop the menu and select 'bluetooth gps'. Then turn on the receiver and the check the box again
that should sort it.
Regards
The Pilgrim
Right now i have NMEA 0183V2 Bluetooth / COM5:
Tried to uncheck : OK
Tried choosing Bluetooth GPS : OK
Tried to check : NOK it simply will not check :?
is the reciever switched on?
As I have posted earlier in other threads and other sites, I have the exact same issue.
However there seem to be people that have got it to work without any extras installed.
Only port to get TomTom to work with my DConnex DC-230 (=rebadged Holux GR-230) is COM5.
I cant tick the blue box with 'Bluetooth GPS' in the lower combo=box.
To get by for now by I digged into the registry.
I created 2 CAB's that do the following:
Set the registry value of TomTom GPS to enabled or disabled.
By starting one of these CAB's I can easily enable of disable the GPS. Would be nice to have a Today Plugin that toggles the TomTom GPS Enabled value (any volunteers???)
BUT I see this solution only as a work-around.
The solution MUST be in selecting 'Bluetooth GPS' instead of 'COM5'.
The task is to find out on how to achieve that.
Any help appreciated.
Hi
i still have rom 1.66.00wwe. and BTTools installed
i run the latest tt gps v3.3 (?) and a fortuna bt clipon.
I can check the box with 'bluetooth gps' without any problems.
You might want to visit www.pocketgps.co.uk
The forums are excellant
i hope this is of use
Regards
The Pilgrim
Pilgrim,
I allready noticed the excellent forums on pocketgps.co.uk, but until now I only got the advise to select Bluetooth GPS instead of COM5. And that is just what is not possible with my 1.72 rom . . .
:idea: Like I said: any suggestions are more than welcom, as is an offer to creat a small program (Today plugin!) that toggles the Enabled registry value of TomTom GPS.
If anyone wants to write that pgm, he might consider simultaneously turning bluetooth on / off.
State 1 : Bluetooth on / TT GPS enabled
State 2 : Bluetooth off / TT GPS Disabled
even better: Make that configurable (via registry setting or whatever lean & mean) for both states
I have been investigating this annoying issue with "ronald2oo2".
He does not have any issues like we do with his 1.72.00WWE ROM.
We did notice some interesting differences between his and my device-behaviour. Also the registry settings between him and me are quite different.
The biggest difference between the two devices is the origin of the OS rom. He uses the iMate based rom, I use the Qtek based rom.
Could anyone with 1.72.00WWE OS ROM, BT GPS and TT3 please post:
1. If (s)he has the possibility of checking the blue--ish box in TomTom GPS when the post is set to 'Bluetooth GPS': YES / NO and with what protocol (NMEA, SiRF, GPS specific)
2. What the origin of the 1.72.00WWE (OS!) rom is: QTEK, IMATE, T_MOBILE beta, . ....
I experienced the same problem for several months now and hoped that it would dissapear when I upgraded to TT3.07 and TT GPS 3.07 but it still didn't work.
Then I came across this post and started playing myself with these settings and found a solution. I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver
I have a Qtek 2020 with 1.72.00WWE OS ROM and Rikaline 6030 BT GPS and TT3.07
I was able to check the blue-ish checkbox with Bluetooth GPS setting after choosing 'NMEA 0183v2 Bluetooth' in the drop down list above 'Bluetooth GPS' and after unchecking 'Outbound COM port: COM5' in my Bleutooth Settings (Start -> Settings -> System).
I hope I am helping a lot of people who have the same problem as I did for months and didn't find a solution for it.
Cheers,
Gino
The sentence: 'I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver' should read 'I can now use TomTom Navigator 3.07 with a bluetooth connection without my Rikaline 6030 GPS receiver'
Or without bluetooth turned on at all. Sorry for the confusion. Must be getting tired
Gino
Did you have to delete the existing bonds?
Because i tried your solution and it still won't let me choose "Bluetooth GPS". Am i doing something wrong? or is it some else different between our xdaII?
I don't know exactly where the bluetooth drivers come from. Can you check if you have OEM_WWE_04071402.sa.CAB in your ExtROM?
or another OEM_WWE_04???????.sa.CAB.
No I didn't have to remove the existing bond(s). I just first unchecked the Outbound COM5 setting in Bluetooth settings, then I removed the checkmark in the GPS Settings so I could select the NMEA 0183v2 Bluetooth option and then I selected Bluetooth GPS. Checked the check box again and closed all open windows and everything was working fine with or without bluetooth/GPS receiver .
Regarding your other question, where can I find this info about the OEM_WWE_04??????.sa.CAB file. I remember looking in the extROM but I forgot where to find it. I'll do a quick search to see if I can find it again.
Cheers,
Gino
you have to install extendedromunlocker
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extendedromunlocker
and then unhide it, and then you would be able to see what's in there.
I also have OEM_WWE_04071402.sa.CAB in my ExtROM. I remember that my Bluetooth connection was not turned on when I tried to change the settings.
Gino
I have Radio version 1.14.00. Is this different from your version? I see that in your profile you pur 1.12.00 but I have noticed that 1.14.00 is not available.
I allready heard from 'ronald2oo2' that he is able to choose the Bluetooth GPS 'port' in TomTom GPS. I went thru all the options with him but still I cant select the 'Bluetooth GPS'. Also TomTom could not provide me with an answer, they eventualy offered to test my MDAII, but thats not an option since I rely on my MDAII.
BUT: I ams till using TomTom GPS 3.03. I will try the update tomorrow since maybe this version has some changes specific for Himalaya . . .
Hi everyone ... i have a big problem.
i use my HTC S710 ex dopod c500 as navigation equipemnt too
software i use is ROUTE 66 MOBILE 7 and gps bluetooth device Garmin GPS10
i not used it for a while about one month. Now i try to use but software tell me that cant estabilesh connection with GPS device. i try to reinstall software ... hard reset phone ... change rom ... but still not work ...
GPS device work cz i trye to conned it with navigation software on notebook and work well ....
I test mobile bluethoot tranfering files and work well ... he see GPS device and pair well ....
so ... why smartphone cant connect with GPS?
thanks everyones
Try with other software like Efficasoft GPS Utilities
I try with Efficasoft GPS Utilities as you told me ... but still not work. Software see my device, estabilish connection ... something happen : i can see altitude incerase and decrease ...
i dunno how to post here pic of my mobile screen ... any way this happen ...
only Alt. change ... N and E always 000000 Sat 6/0 some times 5/0 ... when i tun off gps ... GPS utilities give me error ... so mean mobile and gps in some way comunicate.
I try with TOM TOM ... not work too ....
i feel problem is in mobile's bluetooth configuration.
i try creating "new outgoing port" in mobile .... set com6 and com7 ...
same ... no work
really dunno why some weeks ago work perfect .. and now not
try again gps and notebook ... work perfect
plsss help meeee
i try again today ... driving car GPS on and Efficasoft GPS utilities on .... the only data i can get from satellite is Altitude ....
sat always .... 5/0 .... dindt get N and E
pls help meee ....
why before work .. and now not?
hi
you must name the gps "OTHER BLUETOOTH GPS"
when you sync it with the phone
it will work well with tomtom and other soft
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
matrix77 said:
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
Click to expand...
Click to collapse
i try in this way exactly .... he find my GPS ... but after start GPS in main menu ... can get only altitude.
i just reinstalled HTC official ROM ... but still the same.
i changed navigation software with Garmin Mobile XT and maps from Mapsource.
work perfect ...
sunno why with garmim software work but other software nop.
My Gps module is garmin gps 10d ... maybe now work only with garmin software .. but i know before i used with tomtom and route 66.
anyway ... garmin mobile xt is good too
tnks
Good morning I have a probleme with Garmin XT and my HTC VOX it connect has my GPS but rest blocked on research satellite
install this cab and then try
View attachment enablegps.CAB
it has few registry tweaks enabling gps connection
this will help you connect
his step always not
I think your GPS programs might have been "fighting" for the GPS data or that it had bad epheremis data. It is recommended that with WM 6.1 and above to have the GPS "managed" by the system.
You do this by going from the Start Menu to Settings to System and select External GPS. Then you want to select the Port your programs will use to obtain GPS data. Normally the four lower ones were commonly used by most computer systems which is why I recommend selecting COM9 as the port.
On the Hardware tab, you need to identify which Port your GPS is on. I used GPSToggle, which is a Today plug-in, to start and warm up my GPS. You can read about GPSToggle here: http://www.freewarepocketpc.net/ppc-download-gps-toggle.html.
Download the CAB file which I recommend installing to your device internal memory. Then go to your Today screen and then to Settings menu followed by Today. On the Items check the box next to BAF GPS Toggle. Click okay and this will place GPSToggle on your Today screen.
Unfortunately most smartphones do not have dedicated GPS chips because they eat battery power. On a dedicated receiver like a Personal Navigation Assistant (handheld GPS aka PNA), the GPS is turned on automatically when the PNA is powered up. Depending upon when your GPS was last activated, a dedicated SIRF chip can go from cold-start to 3D fix in as little as 42 seconds and as long as three minutes if epheremis data is present and the GPS has not been moved more than 10 miles from its last power up.
For most smartphone users, the last time your GPS was fired up was when it was built in China or wherever. The GPS can retain that information as its old epheremis data which is used to communicate with satellites. If the data is bad and old, it can take much longer for your GPS to lock-on and get a 3D fix.
For this reason, it is recommended that on smartphones that a GPS utility like the ones mentioned above be used. In essence, the smartphone's GPS must be "warmed up" from a cold start state to warm state where it is communicating with satellites in resolving a 2D fix ultimately to hot state where 3D fixing is available.
GPSToggle on your Today screen will "warm up the GPS" for you when you turn it. You will then see bars indicating the number of satellites the GPS has found. Once it syncs with them, the bar will go solid. When four bars go solid, 3D fixing is available. At that point you could turn on your satnav program and should be good to go.
If you see the altitude and nothing else comes in then the BT connection is obviously ok, so pairing, establishing the connection via COM port and the program using the connection seems ok.
Your problem then is the GPS receiver not sending the data required.
Find a program that resets the GPS receiver, if you can remove the battery put it out for half a minute and reinsert it. Once the GPS has a satelite fix again it should deliver all data.
A good free powerful utility is SirfTech - obviously only useful if your BT Mouse has a SIRF chipset.
prajith said:
install this cab and then try
View attachment 82758
it has few registry tweaks enabling gps connection
this will help you connect
Click to expand...
Click to collapse
Hello, was enablegps.cab developed here on xda? If so, is there a thread on it?
Have just got my TP on Vodafone UK, it does not have GPS enabled, is there any way I can enable it
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
NO GPS
freco said:
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
Click to expand...
Click to collapse
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Sounds to me like you've got the version of tomtom that doesn't have the option of choosing the internal GPS.
Download GPSTest to see whether the GPS is automatically detected.
can i suggest u try gps test n see what that does
also try it with google maps
i think this might be a handset fault tho cant see why it would be disabled as its a selling point
Im 99% sure that TT6 doesnt support internal GPS modules, had the same problem with my N95....or come to think of it was that TT5? Hmmmm im not so sure now lol...
TT6 worked fine on my MDAC3 with internal GPS.
Funnily enough, the Voda specs page makes no mention of GPS at all
ryraum said:
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Click to expand...
Click to collapse
have you tried Other NMEA GPS-reciever, baudrate 4800, COM4 already?
NO GPS
Your right vodafone does not show GPS
Have tried it with Google Maps and will try it with GPStest this evening.
Spoke to Vodafone are going to send another handset
have also tried Other NMEA GPS-reciever, baudrate 4800, COM4
I have a Vodafone handset and thought the same as you.
It does have a GPS and it does work with TOMTOM 6.
1. Go to programs and slect quickgps and download.
Then go into tomtom and under showgps satus select configure and choose other NMEA GPS, slect baud rate 57600 and then load a destination.
Make sure you are outside tho and it might take 25 mins to get your first ever fix.
Mine connects within seconds now.
Good luck and let me know if I can help you further.
Could someone post the link to the Tom Tom 6 or 7 cab file for the Touch Pro?
Thanks
Regards,
Neil
http://forum.xda-developers.com/showthread.php?t=427744
2 threads above this one
ALL Working Fine
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
EN4CER69 said:
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
Click to expand...
Click to collapse
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
ardsar said:
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
Click to expand...
Click to collapse
Thanks for that.... Do you know if there are any advantages with tt7 over tt6 other than newer maps?
and
when tt do official release tt7 will it inc a cab/install file?
many thanks again
ALL Working Fine
Test handset with GPStest, works fine.
Change GPS setting to com4 speed 9600, wait 2mins and got a signal.
TomTom 6.030 loaded and working
Thanks to all for your help and avice.
ryraum said:
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
Click to expand...
Click to collapse
I'm also facing a similar problem. Google Maps is unable to detect the internal gps receiver.
When I run, GPS Test, it just shows the GPS starting up message (with 2 yellow bars, sometimes only one). I have run quick gps and downloaded the satellite data twice already.
Can somebody please help me?
Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.
hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O