Database Info

[Q] HTC Inspire Running StarDroid

I wanted to ask this questions in the developer forum and after searching and searching though the General and Q&A forums I can't seem to find a clear answer so here it is.
When I setup my goldcard the only microSD I had available was a 4GB and now I want to upgrade to a 16GB and I have lots of stuff on my 4GB that I really want to keep and since I made it a goldcard none of my readers can ready or copy the data from the card, which leads to my question.
How do I get everything off of my existing 4GB microSD onto my new 16GB microSD without starting from scratch?
Is there a tool out there that can read my cards so that I can copy the data to my my HDD?
I tried to use a hex editor, but realized that since the FAT of the card has been modified specifically to that card, I'm not sure where to start copying from so that I don't waste my 16GB card when I write the data to it.

Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] Problem with reading SD card after upgrading to honeystreak HD7

Problem with reading SD card after successfully upgrading to honeystreak HD7 R2.
used to have a froyo t-mobile stock with no problem with the card.
after upgrading to honeystreak, my dell streak wont read the SD no more.
the only thing that it is saying is "mount the sd card". i always click that and nothing happens.
can anyone please help me? thank you in advance!

Welcome to forums
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.

probably the rom doesnt support your sd card's file system.You can try formatting and removing all the partitions you have made

[Completed] [Q] Issue: Files keep currupting on sd card.

I have a cheap 64GB Micro SD Card (and by cheep I meen unbranded and all) but ignoring that, i have some N64 Roms that keep currupting at random. If i were to put a fresh batch on N64 roms on the SD card in .zip format, they seem to work on MegaN64 and N64oid just fine, but if i quit ANY game and then later on want to play another game or the same game again, MegaN64 just crashes and N64oid can't read the files says something like "Load ROM failed. Please try another." and I do and all say the same thing, regardless if i've launched them before or not. Also if i were to put a ROM, decompresed to .z64 or .n64 or whatever, they become "currupted" aswell and cant be used, and after .zip roms become currupted, i cant decompress them, as on 7zipper, EsFile, or the phones decopressor cant read them anymore.
Also these are the only files that seen to be affected as, PSP, GBA, and all others, seem to work fine every time i want to play.
These are the same games i used to have on my 16GB Samsung Micro SD Card and worked fine.
What can be causeing the problem?
Eather of the emulators or the SD Card it self?
ive also tried restarting my phone but the files are still currupted...
i have backed up, and formated my sd card and still the same, is there a specific way i should format it or something? NTFS? FAT32? or what? I didnt format it with windows though, i formated it with an LG MyTouch, and i was using that phone to put all my stuff back in it because this new android doesnt have Mass Storage USB Devise, and i also wanted to check if it was fragmented with auslogics disk defrag.... turned out it wasnt at all...

Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

R_a_z_v_a_n said:
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Click to expand...
Click to collapse
Ok ^-^ thnx for your help, i apreciate it.

[Completed] HTC ONE (M8) - Unable to save file to SD card due to insufficient file permissions.

Hey Guys, I wonder if anyone could help me out.
Yesterday I rooted my phone, and used TWRP, after a bit of finess I finally got everything working. Except when I try to use the camera I get the Error "Unable to save file to SD card due to insufficient file permissions."
Only thing is, I do not have an SD card in the phone.
For some reason it is trying to save files to an SD card when there is none inserted.
Any idea what I might do to fix this?
EDIT: I just bought an SD card and it could save to it. Still wont save to phone storage, but I am not worried. Mods feel free to lock this thread as the issue is resolved.

Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum. The experts there may be able to help. Good luck.

Issue solved, thread closed.

Help Please. Kyocera DuraForce E6810

Hi, I am a very accomplished PC super-geek user who can troubleshoot/fix just about any computer problem, and I'm looking for the equivalent person in regards to the Android phone.
I just bought a (brand new) DuraForce E6810 and put a new 32GB SD card in. When I put the card in, I elected for it to be used as internal memory in order to install/run apps from it. The SD card shows up in Settings > Storage, but it does not show up in ANY of the file manager apps I'm trying to use to manipulate/move files. I figured the "internal" storage might show up as 64GB in the file manager apps (32 internal + 32 SD configured as internal), but that is not the case. The file manager apps only show the 32GB internal memory that came with the phone. Anyone have any advice? I am planning to root the phone in order to (hopefully) take advantage of the HotSpot feature as well as the FM radio chip. Any advice on these topics would be greatly appreciated, also.
Thanks!

gomyr said:
Hi, I am a very accomplished PC super-geek user who can troubleshoot/fix just about any computer problem,......
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3133882
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

I can't post to the thread you suggested.
Apparently due to spamming issues that have occured on this forum, members like myself who don't have enough "useful" posts are unable to start a new thread in a forum that is actually relevant to the problem that I am asking advice about.
I do thank you for trying, though. Does anyone else know how I can get the help I need?
Thanks in advance.

gomyr said:
Apparently due to spamming issues that have occured on this forum, members like myself who don't have enough "useful" posts are unable to start a new thread in a forum that is actually relevant to the problem that I am asking advice about.....
Click to expand...
Click to collapse
You don't have to post another thread...
You can ask a Moderator, like @SacredDeviL666, to move this thread to another area. Just state which specific area you would like this thread to be moved to.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

gomyr said:
Apparently due to spamming issues that have occured on this forum, members like myself who don't have enough "useful" posts are unable to start a new thread in a forum that is actually relevant to the problem that I am asking advice about.
I do thank you for trying, though. Does anyone else know how I can get the help I need?
Thanks in advance.
Click to expand...
Click to collapse
Hi,
There is a tagged device thread/forum for your device which is why you are unable to post there directly.
I will get an admin to look and include your thread in that Tagged Forum :- https://forum.xda-developers.com/t/kyocera-duraforce

SD card formatted as Internal vs. Portable problems
SacredDeviL666 said:
Hi,
There is a tagged device thread/forum for your device which is why you are unable to post there directly.
I will get an admin to look and include your thread in that Tagged Forum :- https://forum.xda-developers.com/t/kyocera-duraforce
Click to expand...
Click to collapse
Thanks for moving this to the Kyocera DuraForce superthread. My device is Kyocera DuraForce Pro E6810 (Verizon). I have a 32GB MicroSD card, to go along with the phone's 32GB Internal memory.
After formatting the SD card as INTERNAL memory, I connected the phone to my computer via USB and selected USB File Transfer (MTP). On my computer, it ONLY shows the SD card with 28.6GB free out of 29.2GB Total memory, and the phone's ACTUAL internal memory is not listed at all.
After reformatting the SD card as PORTABLE storage and connecting the phone to my computer, it lists the SD card with 29.7GB free of 29.7GB Total, and the Internal memory with 15.0GB free of 21.0GB.
Both the SD card and the Internal memory of the phone are 32GB total space, which should be 64GB combined. Can someone please tell me why after formatting the SD card as INTERNAL storage, I only see 29.2GB TOTAL memory on the phone, and there is NO Internal memory listed at all when connected to my computer?

So I think I have this figured out, someone please verify this for me:
Formatting the SD card as INTERNAL storage REPLACES the phone's original internal storage and DOES NOT ADD TO IT! Is this essentially correct?

im a bit late on the response sorry
but respectively, yes you are pretty much correct. although it doesnt run off of the internal FS via the sd card, that would be silly, i believe it creates a duplicate partition of the part of the internal FS that allows a specific type of apps data to be run the can normally not run externally. such as meta data and binary files which contain the "actual" code for the app and not just a users cached data. To be honest i could be wrong idk, but that is my idea of what happens in your case. ita definitely happened to ne before.