Hi,
I searched this forum, but I couldn't find a solution for my update problem. I tried several times to update my German MDAc with this file:
http://www.t-mobile.de/downloads/mda_i-iii_compact/ma_tmde_10601_130_10500_ship.exe
The problem is I get always the Country ID error 120. I tried the MaUpgradeUt_noID.exe and the cracked one. With this programs I just get a different error message/number. I tried also various other things: I did the [CHECKCEID_TYPE]=1 modification to RUU.conf, I disabled McAfee, I did a hard reset first etc.
Does anybody have a clue what I'm doing wrong?
Please help
Andreas
I used that one to upgrade my MDA Compact T-mobile (no sim lock) and it works so fine. I wouldn't know what is happening with your MDA...
Andre
Andre,
it's just a German T-Mobile MDAc which I bought 2 months ago. No modifications made. Just a 1GB SD-Card and E-Plus SIM card.
The T-Mobile hotline told me, that I might send it back for exchange/repair. But I would like to keep it....
Andreas
I copied my question to the right forum Magician upgrading etc.
Sorry for any inconveniences
Andreas
Related
I was in the middle of a rom upgrade with my magician and the battery has died now after trying to reupgrade with the original imate rom, it gives me a country code error. When I use get device data and view the devicedata.txt file all I get is 2 little squares where there was the operator ID. How can I reinstall the original rom from Imate and have it overwrite the operator ID on the device so I will except the upgrade. I have tried this via SD and with the original upgrade but with no luck. Help is really need please. I know this can be done I just aint sure how to go about doing it. It happen to be with my Qtek 2020 when upgrading to the 2.20 CHS version it changed from Qtek to o2.
Hi.
I damage MDAc with testing of flashing Now only what I can is start MDAc to BootLoader (version 0.2), nothing else. All updates, what I testing are "Country ID error" and dont help me changing operator too. I have other device, but it is I-Mate JAM. From JAM (BootLoader version 1.0) I download ROM to SD card (via USB terminal), but when I insert card in MDAc, only, what I seee is "Not allow update!". When insetr SD to JAM, all is OK and flashing is allowed. I dont have SD card reader. What can I do?
Thank!
V okamžiku kdy spustíš nový upgrade, a napíše ti to "country ID error", hned zmen operatora u toho updatu na jiny, cihlu ponechej připojenou, a upgrade spusť znovu. Opakuj dokud nevystřídáš všechny čtyři operátory. Vůbec mezitím neodpojuj cihlu od PC. Pokud se to nerozjede ani s jednim operátorem, zkus hned jiný upgrade, a postupuj stejně.. Takhle jsem kdysi probudil jednu totálně mrtvou MDA II.. I´m busy, so I don´t have a time write it in english.. SORRY
And which four Country ID codes you mean? :wink:
T-mobile, CDL, Qtek, O2. Test upgrade with this all operator, and let the Compact connected to PC during this testing..
And ID's ?
I don´t know it.. But I think, every operator has his own upgrade, so find them and test them.. Someone must work!!!
"Country ID error" is diferent between this upgrade..
I dont know why, but now my MDAc can boot to system (but without GSM). I run GetDeviceData.exe and this is DeviceData.txt. As you can see, some informations are missing. I test start upgrading on JAM and after verify I connect MDAc, but this dont work too.
Give me your phone number. I want to speak with you.. It will be quicker.
I'am not on phone now, go to ICQ :lol:
Where can I find Divice ID in update files? Now I have Error 100 message
Where are you come from?
Czech Republic. Why?
I still need help
Try this:
http://forum.xda-developers.com/viewtopic.php?t=14553
It allowed me to flash an english Rom (and later an Italian one) over a German device. I suppose that if you find right international codes of your rom you can flash the new one.
Good luck! :wink:
thanks, but this dont work too, still wrong country ID
This is my first message here. I have read many times the forum and downloaded files, but I have a problem I cannot solve.
I bought a T-mobile Mda Compact (UK - WWE)
The first thing I did was to unlock the device, to see if it worked.
Then I tried to upgrade SW. After many attempts I succeded in upgrading ROM to ITA Imate 1.12.04, but couldn't upgrade Radio. In fact the upgrade had been possible only when I took off the radio file when upgrading.
now I want to upgrade to the radio 1.12, but my attempts were unsuccesful. Tried with original Maupgrade, with the cracked one, with the NOid version,....
Please help me. Thanks.
Sometimes it just won't go, do you have warranty left? Cause it's a failure which shouldn't be.
M
no warranty left.
MAupgrade files are all the same or are different for each product id?
how would you act if you were me?
If I were you? Well I'm very lucky I got a two year warranty, 1.4 year left .
But I would keep on trying via shipped-rom, all magician radios are suitable, & via SD-flash. Cause a trip to repair centre mostly isn't cheap. I know I've said it before: sometimes it just won't work & it needs to repaired by a repair centre :-(
Regards, M
BTW most instructions can be found in the wiki
yesterday night I tried again...
what I am sure of is that when I start MAupgrade the device goes in bootloader mode and so remains.... until I re-install the whole rom (radio excluded)...
I am wondering to leave things as they are... are there great differences between Radio 1.01 and 1.12 ?
thanks
I prefer radio 1.12, better reception & no trouble with reconnecting GPRS anymore.
But if you can't get it to upgrade ...
i all,
i need to know how old my software is i have:
rom:1.0.7.0
operator:1.6.312.4
radio:4.0.13.17_01.04.00
on a qtek 8300...
is there any newer version? language and t9 in portuguese ?
thanks...
ur software is very old, rom 1.0.70 is old, you should be at least on 2.0.x.0
login to myqtek.com and get the upgrade!
wow...
thanks, i've already try that, but it says my imei in not valid.
my mobile came from dangaard, but i'm from portugal... i send a mail to the place where i bought the phone and they said it was from dangaard!
Dude, that rom is old. Here is a link to download Dangaard/qtek rom version 2.0.9.0 for qtek 8300.
http://rapidshare.com/files/25367924..._Ship.zip.html
many thanks for that.... bu i'm getting file not found on rapidshare...
one more question... will i have portuguese language on menus and on t9?
many thanks
Paulo Fernandes
Sorry, I guess that link expired. I have reposted to rapidshare, and here is the new link:
http://rapidshare.com/files/27726683/TO_DAN_NOR_2090_263111_020900_Ship.zip.html
I don't think that Portugese t9 is available on this rom. But I have attached a cab file (from [[cold]]) that is supposed to install portugese t9.
good luck.
no luck
well it seems that this phone is not from dangaard...
i got the "invalid vendor id" error... what should i do?
application unlock and super CID unlock. search forums for methods, but let me know if you are stuck.
but my phone is not sim lock...and i'm able to install all the apps that i've tryed...i cant't find the cid unlock, could you give me the link...
sorry to be asking all this but i just e wanna be shore that i do things the right way... this phone is 1 week old :|
Well, you're able to install anything you have tried, except the ROM upgrade
SIM unlocked is different than application unlock and CID. Be warned that CID unlock will invalidate your warranty, probably new ROM also will. But the new ROM is worth it, imho. Here is a nice guide describing unlocking/upgrading procedures for 8310, which will also work for 8300:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
well i haven't think about the warranty... what would be the main benefits of the upgrade?
battery? signal strength ? software?
well, the main advantage that I like is being able to use a2dp (wireless stereo), radio upgrades, but others like push email and other stuff. I guess if you are happy w/ your old ROM there is no sense in changing it.
well my main problem is the battery ... it last 2 days. and wi-fi connection to wpa networks
my battery life is about 4-5 days, and I use wifi quite often on secure and wpa networks without problems.
follow the instructions given here and nothing can go wrong:
http://www.modaco.com/Guide-to-Upgrading-Qtek-8310-to-the-Latest-2090-AKU2-ROM-t240179.html
Hi.
I bought a MDA pro (qtek 9000 etc)./
But it is totally messed up by the previous owner. I tried to install windows mobile english (it has windows mobile 6.1 german). But it says it isnt the right software for the device. And the phone function doesnt work.
Can someone please help me with how i can make my phone function work and change the language to english (german is the only installed version).
Specs:
3G
Unlocked.
Please, who can help me???
Dominick
this post here:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
Is the easiest way to learn what your doing to flash a new WWE Rom,
Thank you,
I have a english version now (yEAH!!!!)
But i still have the error NO GSM. (but other numbers on the screen: d 2.61 29 wwe
Who is familiair with the error and knows a solution?
ERROR 114?
Do you receive a "error 114" when loading a radio ROM? I've had the "NO GSM", "ERROR 114" since 2005 on my XDA Exec. Unfortunately, I have yet to find a solution. There is some info. on this error that can be found, but not much, and no success stories...SORRY...However, I'd be forever grateful if you did discover a fix and I'm sure others would be too; if you shared it. Good Luck!!
u can ask for a solution through MTTY .. maybe someone can help u format the radio rom and reflash it or something
i'm no expert, but i think some expert can give u a code to use in MTTY to do that
Hi,
I would like to thanks everybody for his or hers help.
But i filed a complaint where i bought it and i could bring it back and i recieved my money back.
So i think this thread is ready for closing